ReviewsHeader Back Exhaust

Remflex (8053) OBX Exhaust Header Connector Gasket, (Set of 2)

  • 1-3/4 inch pipe, header tube connector flange, 4-into-2/2-into-1.
  • Bolt hole spacing: (A) 4-5/8 inch x (B) 3-1/4 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten the flange bolts.
  • Remflex exhaust gaskets come in a standard 1/8 Inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 Inch.
Check Stock

Maxon Auto Corporation 2 Roll 2\ x50' Black Fiberglass Exhaust Heat Wrap Heat Shield Sleeve with Stainless Steel Zip Ties (Pack of 20)

  • Reduce up to 90% Radiant Heat - helps shield fuel lines, brake lines, wire looms and more from radiant heat.
  • Rated for 1350°F continuous, 2000°F intermittent. Always wear safety glasses, dust mask, gloves and long sleeves are recommended when handling this exhaust header wrap.
  • Fiberglass exhaust header wrap can create more horsepower and reduce under hood temperatures.
  • 1/16" x 1" x 50' Roll fiberglass exhaust heat wrap wiht 11-3/4" stainless ties (pack of 5).
  • Special weave makes it easier to wrap around bends, and gives carbon fiber look..
Check Stock

Tight-Fit Small Block Fits Chevy Block Hugger Headers

  • These small block Chevy tight fit headers work well on early hot rods with narrow frame widths due to the slim 4" distance from the flange to outermost point.
  • 1-5/8" primary tubes and 2-1/2" collectors aid in fitting tight clearance applications.
  • These come painted black for corrosion protection prior to use - we suggest stripping the paint and applying your preferred color of high temperature header paint.
  • Oval exhaust ports fit stock small block Chevy heads - will not clear angle plug heads.
  • Come complete with gaskets, header bolts, and 2" reducers to connect to your exhaust system.
Check Stock

Jones Exhaust AHB2

  • 3.00 Inch Header Buddy Collector Kit 3.00 Inlet 2.25 Outlet 3 Bolt Flange Jones.
  • 2 Flanges 2 Collectors and 6 Nuts and Bolts Included.
  • HEADER BUDDY Is An Innovative, New Design For Header/Exhaust Assembly That Requires NO GASKET.
Check Stock

Mophorn Exhaust Header Set 1 5/8 Exhaust Turbo Headers Stainless Steel LS Swap Exhaust Headers Engine Conversion LS Swap Shorty Headers for Chevy LS1 LS2 LS3 LS6 LS7 SUV Camaro Firebird Truck

  • High-quality Stainless Steel: This exhaust header has premium quality, made of high-strength 304 stainless steel with reinforced interlocking braid....
  • Excellent Performance: Completely welded to against cracking and wearing under high pressure and temperature. With mandrel-bent to maintain....
  • Precise Dimension: With CNC Machined Flanges, 2 1/2" collector, 1 5/8" primaries. This exhaust header set is designed to combine, the exhaust gasses....
  • Easy to Install & Use: Integrated hardware, gaskets, bolts, and fittings pipes into a powerful turbo exhaust piping system, the pipe kit shows a....
  • Direct Fitment: It is compatible with for the Chevrolet Camaro Fits Chevy LS1 LS2 LS3 LS6 LS7, adding instant horsepower to the engine, improving....
Check Stock

Flowmaster 817587 American Thunder 409S Dual Rear Exit Cat-Back Exhaust System with Aggressive Sound

  • Mandrel bent 16 gauge stainless steel tubing.
Check Stock

GREHUA Upgrade Header Exhaust Pipe Jet Kit for Non Hemi Predator 212cc 196cc 6.5hp XP7HPE GX160 GX200 Baja Warrior mb200 Ct200u BT200x KT196 Ct200u-ex RB200 Go Kart Engine Mini Bike Performance Parts

  • FITMENT—fit for go kart engine mini bike generator powered by non hemi predator 212cc 196cc 6.5hp performance parts powerhorse GX160 GX200 baja warrior mb200 colema* ct200u BT200x monste* moto engine..
  • HIGH PERFORMANCE—it's the predator 212cc performance parts upgrade header exhaust pipe kit. It's a simple job to upgrade go kart engine mini bike exhaust pipe,and let the exhaust flow more smoothly to promote more power..
  • ROAR OF SOUND—if you like pop and loud sounds that want to make your 212cc engine sound like a little beast.You can add the predator 212cc exhaust pipe to amplify the motorcycle roar and you'll be the star of the riding track..
  • PACKAGE INCLUDED—1 x header exhaust pipe,1 x spark plug,2 x lock washer,2 x nut,1 x wrench,1 X emulsion tube,2 x main jet(.036" & .037").
  • NOTE—this exhaust pipe will change color due to the high heat generated by the engine. So You must know this before you make your purchase! And please check as much as possible to the item picture, model and size carefully before purchasing. Or leave us messages for assistance if you're not sure if the exhaust pipe fits.(Engine is not included in the package).
Check Stock

Moroso 72605 Spark Plug Wire Set

  • Ultra 40 Custom Fit Wire Set, Blue Wire, Sleeved, BBC, Under Header/Non-HEI.
  • 8. 65mm diameter wire with 40 ohms of resistance per foot.
  • Sleeving adds extra dielectric strength which is wire’s ability to not be affected by outside electrical pulses.
  • Sleeving extends spark plug wire life and protects against exhaust header heat, chaffing and contaminants.
Check Stock

Moroso 73616 Spark Plug Wire Set, Blue, Two

  • Ultra 40 Custom Fit Wire Set, Blue Wire, Sleeved, BBC, Under Header/HEI.
  • 8. 65mm diameter wire with 40 ohms of resistance per foot.
  • Sleeving adds extra dielectric strength which is wire’s ability to not be affected by outside electrical pulses.
  • Sleeving extends spark plug wire life and protects against exhaust header heat, chaffing and contaminants.
Check Stock

Erweater 2 Roll 2″ x 50ft Titanium Exhaust Wrap Header Wrap Roll Kit, for Motorcycle Car Manifold Header Pipe Heat Wrap Tape with 10pcs Stainless Ties

  • Made of high quality thickened fiberglass material with locked edges on both sides for easy breakage. Exhaust pipe wrap can reduce the heat under the hood by up to 50%, improving the performance of cars and motorcycles..
  • It can work for a long time at high temperature from 900 to 1000 degrees Celsius! Stronger and more durable for improved thermal performance and reliability Highly resistant to wear, oil leaks, temperature and vibration damage..
  • Extremely flexible for a tight and secure wrap. Improved horsepower performance for automotive exhaust header wraps, motorcycle exhausts, gas pipes and other custom applications..
  • Soak header heat wrap in water prior to installation so the fiberglass doesn’t fly around. Put on gloves (not included), wrap it around the exhaust pipe, secure it with an overlap (like the grip of a tennis racket), and simply secure the ends with stainless steel ties..
  • Package includes two 2″ x 50 ft rolls of heat wrap, 10 stainless steel zipper ties. If you have any questions or are not satisfied, please feel free to contact us..
Check Stock

Cobra 2\ Diameter Chrome Heat Shield 99-0165P

  • 2"X50' Titanium exhaust wrap with (pack of 15)11.8" Stainless Steel(304) Locking Ties.0.08" thickness.
  • Before installing, soak the header heat wrap in water so that the fiberglass will not flying about. Wear gloves to avoid itching. Wrap it around your exhaust pipe, using overlap to hold it in place and simply use stainless ties to secure the ends in place..
  • High resistance to abrasions, oil spills, temperatures and vibration breakdown..
  • The exhaust heat wrap tape can withstand 1800F direct/2500F radiant heat..
  • Car heat shield wrap can reduces heat under hood up to 50% and improving car and motorcycle performance.
Check Stock