ReviewsHeader Connector

Cable Matters 2-Pack 2 Way 4 Pin PWM Fan Splitter Cable - 4 Inches

PC fan splitter Y cable connects 2 computer case fans to a single motherboard fan header.
1 to 2 case fan splitter connects an additional fan to increase airflow in your computer case.
Mobo 4 pin fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
Fans can spin at the same speed using software from a motherboard equipped with PWM control.
Master / slave PWM splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other fan.
The computer fan splitter omits the RPM signal pin for tandem fan speeds with both fans.
Double CPU fan splitter adds 4 fans with the Cost-effective 2-pack of fan header splitter.
Sleeved and wrapped black 4-inch PWM Y cable provides a tidy look in an open computer case.
3-pin & 4-pin fan compatible with popular brands of computer case cooling fans Corsair Air Series AF120 80mm / Series AF140 High Airflow, Cooler Master Blade Master 80 / Master 92, Cooler Master Hyper 212 EVO 120mm, Cooler Master JetFlo 120mm, Cooler Master SickleFlow 120mm, Cooler Master MegaFlow 200mm, Noctua NF-F12, Thermaltake WATER 3.0 Dual 240.

Check Stock

Monoprice SCSI (HPDB) 68 Female to IDC 50 Female Adapter (100076)

The IDC 50 connector is a 50-pin 8-bit SCSI "header" connector used for internal-type ribbon cables.
It is also known as the "Alterative 2" connector.
It has parallel 25-pin rows and resembles an older ATA/IDE drive cable except that it is wider and has more pins.
The HPDB 68 connector is a 68-pin 16-bit SCSI-2 connector used for both internal and external connections (plastic for internal and metal for external).
It has parallel 34-pin rows but has the pins much closer together and is therefore narrower than the IDC 50 connector.

Check Stock

Screw Terminal Block Breakout Shield Module for Arduino UNO R3

Terminal Block Breakout Shield Module - for Arduino UNO R3. the item has been soldered and assembled..
Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper..
Standard IDC40 pitch 0.1" header, you can use 40pin FRC(flat ribbon cable) connector cable connect all Arduino Uno pins to peripheral equipment..
With power on LED indicating. red reset button on the side. with a ICSP adapter connect header. FR-4 fiber glass PCB, dual copper layers..
NOTE: the item not include Arduino Uno module..

Check Stock

Supermicro MBD-H12SSL-I-O Socket SP3/ Single AMD EPYC 7002/ DDR4/ SATA3&USB3.0/ M.2/ ATX Server Motherboard, Retail

M. 2 NGFF connector M. 2 interface: PCI-E 3. 0 x4 and SATA form Factor: 2280, 22110 key: m-key double height connector.
5 USB 3. 0 (2 rear, 1 Type-A, 2 via header), 6 USB 2. 0 (2 rear, 4 via headers).

Check Stock

FFB1212EHE-F00 120 x 120 x 38mm Cooling Fan, 190 CFM, 4000 RPM, 59 dBA, 17.78 air pressure, 3 pin Tach connector, Combo Set of 3 Pieces, Ship from USA !!

Air Flow: 190 (Mini. 170.92) CFM or 5.38 (Mini. 4.84) Cubic Meter per minute.
Air Pressure: 17.78 (Mini. 14.30) mmH2O or 0.70 (Mini. 0.563) inchH2O.
Rated Input Voltage: 12VDC, Operating Input Voltage: 7 – 13.2VDC, Input Current: 2A (Max. 3A).
3-pin connector with speed (Tach) sensor – Caution: the 3-pin header must provide a minimum of 3A of power in order to power this fan so please check if your motherboard’s 3-pin header can provide enough power and if the header might overheat. We suggest using a fan controller with enough power, or purchase the same fan in the 4-pin molex + 3-pin connector version so you can power the fan directly from a power supply but without the ability to control the fan speed..

Check Stock

Smraza 100pcs Double Sided PCB Board Kit, Prototype Boards for DIY Soldering and Electronic Project Circuit Boards Compatible with Arduino Kits, 30PCS 40 Pin 2.54mm Male and Female Header Connector

Selection of Multi-Sized Proto Boards - 30 pieces double-sided prototype boards of 4 different size to meet your demands when designing your own Arduino kits, electronic experiments and DIY projects. （10 pieces 2*8cm, 10 pieces 3*7cm, 5 pieces 4*6cm and 5 pieces 5*7cm PCB boards.
Header Connector - 10 pieces 40 pin male header, 10 pieces 40 pin pitch right angle male headers, 10 pieces 40 pin female header.
pitch: 2.54mm, single row and straight connector.
Screw Terminal Block - 5 pieces 5.08-301-2P and 5 pieces 5.08-301-3P.
pitch: 5.08mm, rated voltage: 300V, rated current: 16A..
Jumper caps - 30 pieces standard 2.54mm pin spacing circuit board jumper cap in 6 colors, 5 pieces per color..
Environmental and Elegant Packaging - Compact paper package take little footprint..

Check Stock

Phanteks PH-DRGBLED_COMBO_01 Digital RGB LED Strip Combo Set 2x 400mm 1x M/B adapter ASUS/MSI compatible Retail (Works only with DRGB boards)

Input : 3 pin female, Compatibility : Phanteks 3 pin connector / M/B 3 pin DRGB Header (+5V,DATA,N/A,GND).
Connector : Extension: male to female extension cable M/B Adapter: Digital RGB adapter 3pin (+5V,Data,N/A,GND).
Phanteks Digital RGB LED strip has integrated magnets in the silicone housing allowing for easy installation to the metal chassis. For a really secure fit, our strip includes double-side 3M tape..
With our 1 orientation connector, you can rest assure that the connectors are in the right position. The Digital RGB strip is also chainable so you can expand the length by adding more light strips..
The Digital RGB Strips Combo Set comes with a Digital RGB LED adapter that allows the Digital RGB strips to work with motherboards only that features a Digital RGB Pin header (+5V, DATA, NA, GND)..

Check Stock

PWM Fan Splitter Cable 2 Pack, PC 4 Pin Fan Power Extension Cable 1 to 3 Fan Splitter Converter [Sleeved Braided] for Computer ATX Case 4-Pin/3-Pin Cooling Fan Cable - 12 Inches

【1 to 3 Fan Splitter Cable】4 Pin fan splitter cable connects 3 computer case fans to a single motherboard fan header.
PWM splitter cable connects an additional fan to increase airflow in your computer case.
Fan speed label on the 4 pin fan master connector of the fan header splitter is wired to receive the PWM control signal and share it to the slave fans..
【Easy to use】The Fan Splitter Connects 3 Computer Case Fans to a Single Motherboard Fan Header, Compatible With 4 Pin and 3 Pin PMW Fan Connector.
【Steady and Durable】Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean & tidy..
【Broad Compatibility】3-pin & 4-pin fan compatible with computer case fans such as the Cooler Master Hyper 212 EVO 120mm, a 200mm case fan such as the Cooler Master MegaFlow 200mm, and 230mm case fans.
Add more cooling to your computer with this PWM fan splitter cable..
【Lifetime Warranty】Originated from confidence in product quality, we provide unconditional lifetime warranty ensures long-time satisfaction of your purchase and provide 24-hour service online..

Check Stock

ZYAMY 10pcs 2.54mm 40Pin Round Female Socket Pin Header Strip 1x40P Single Row Straight Female/Male Socket/Pin Header Strip Connector Black

Type: 2.54mm 40 Pins Single Row Straight Round Female Socket Pin Header Strip.
Use: Be widely used in Arduino Electronic DIY, such as: electronic circuit, electrical appliances, instrumentation ,PCB circuit board etc. electronic project..
Package: 10pcs 40 Pin Black Round Female Socket Pin Header.

Check Stock

E-Simpo 10pcs 2.54mm (0.1") Hole Round Female Header Socket Gold Single Row Arduino PCB Female IC Crystal Socke High Quality (1x40P Hole Female Header)

10pcs Single Row 40 Pin 0.1"(2.54mm) Header Socket Connector.
Single Row 40Pin Round Female Pin Header.
High Quality, Gold-Plated Contact,better electrical conductivity and low contact resistance. Generally used in circuit boards and other low-voltage circuits..

Check Stock

Wire Jumper Pin Connector, 620 Pcs Jumper Wire Cable Pin Header Connector Housing Kit Male/Female Crimp Pins Terminal with Storage Box

Dupont Connector Kit, This kit comes with the most common jumper wire pin housings in addition to male and female crimp pins.
Servo Connector Kit, These work great with all your typical breadboard style pin connectors and sockets.
Jst Connector Kit, Great selection of parts to make both male and female connectors is sizes from 1x1 to 2x6 pins.
Ribbon Cable Connector Kit, Come in a transparent box of classification management for convenient use and storage.
Jumper Wire Cable Pin Header Connector Housing Kit, There are total 620 pieces jumper wire connector parts which is good for home electronics prototyping.

Check Stock