ReviewsHeader Laterals

TWOPAGES Liz Linen Curtain Linen Drapery Panel for Living Room Bedroom Patio Door (Custom)

  • FABRIC: Sold per panel, not a pair. 80% Polyester, 20% Linen. Heavyweight 350 gsm faux linen material. Skin-friendly, excellent colorfastness..
  • WIDTH: For pleated, goblet header, panel width is the width that pleats are already set, we recommend fullness ratio 1.0 time wide of your curtain rod or track. For tab top and rod pocket header, we recommend fullness ratio 1.2-1.5 times wide of your curtain rod. For grommet header, we recommend fullness ratio 1.5-2 times to create the waves and folds when close the curtains. For flat hook and back tab header, we recommend fullness ratio 1.25-2 times wide of your curtain rod..
  • LENGTH: For grommet, rod pocket, back tab and tab top header, measure from the top of rod to where you want the bottom of the drapery to be (1/2" above the floor, or approximately 6" to 8" below the window sill ). This is your finished top of pole to hem drop. For flat hook, pinch pleat and goblet header, measure from ring eyelets to the floor. Subtract 1/2" to get the panel length you need..
  • Fit for living room, bedroom, patio door, club, kitchen, hospital, room divider..
  • Machine washable for the unlined, white darkening or 90% blackout lining, in cold water and gentle circle. Dry clean suggested for privacy or thermal blackout l....
Check Stock

Gigabyte LGA 1155 Intel Z77 HDMI SATA 6 Gb/s USB 3.0 Micro ATX Intel Motherboard GA-Z77M-D3H-MVP

  • ...ATA 6Gb/s connectors. 4 x SATA 3Gb/s connectors. Support for RAID 0, RAID 1, RAID 5, and RAID 10..
  • USB: Up to 10 USB 2.0/1.1 ports. Up to 4 USB 3.0/2.0 ports..
  • Internal I/O Connectors: 1 x 24-pin ATX main power connector/1 x 4-pin ATX 12V power connector/2 x SATA 6Gb/s connectors/4 x SATA 3Gb/s connectors/1 x CPU fan header/2 x system fan headers/1 x front panel header/1 x front panel audio header/1 x S/PDIF Out header/1 x USB 3.0/2.0 header/3 x USB 2.0/1.1 headers/1 x serial port header/1 x parallel port/1 x Trusted Platform Module (TPM) header/1 x Clear CMOS jumper.
  • Back Panel Connectors: 1 x PS/2 keyboard/mouse port/1 x D-Sub port/1 x DVI-D port/1 x HDMI port/2 x USB 3.0/2.0 ports/4 x USB 2.0/1.1 ports/1 x RJ-45 port/3 x audio jacks.
Check Stock

Exhaust Wrap LIBERRWAY Header Wrap Exhaust Heat Wrap for Exhaust Pipes Tap Kit for Car Motorcycle, 2\x50ft with 10 Stainless Ties and Gloves

  • Premium Quality Exhaust Heat Wrap: LIBERRWAY exhaust wrap is made from pulverized lava rock. The header wrap reduces heat under hood up to 50% and improving car and motorcycle performance..
  • Effective Exhaust Header Wrap: Withstands 1400℉ direct heat and 2000℉ intermittent heat. Stronger and more durable for improved thermal performance and reliability. High resistance to abrasions, oil spills, temperatures and vibration breakdown..
  • Functional Header Wrap: Extremely pliable for a tight and secure wrap. Improves horsepower performance and can be used on car exhaust header wrap, motorcycle exhaust pipe, gas pipe and other custom applications..
  • Easy to Install: Before installing, soak the header heat wrap in water so that the fiberglass will not flying about. Wear gloves to avoid itching. Wrap it around your exhaust pipe, using overlap to hold it in place (like a tennis racket grip) and simply use stainless ties to secure the ends in place..
  • What You Get: A roll of 2 in (width) x 50 ft (length) x 1/16 in (thickness) header exhaust wrap, 10 pcs 0.3 in (width) x 11.8 ft (length) 304 stainless steel zip ties and a pair of gloves. LIBERRWAY exhaust wrap comes with 1 Year Free Warranty and Full Refund within 60 Days to ensure your pleasant shopping experience....
Check Stock

USB Front Panel Adapter, JoyReken Vertical USB C Header Adapter, USB 3.1 Type-E Key-A to USB 3.0 20Pin Header Converter for Type C Motherboard

  • Supports all motherboards with USB 3.0/ 3.1 19-pin header.
  • Motherboard: USB 3.0 Internal 19 Pin MB Male Housing Header.
  • Front Panel: USB 3.1 A-Key 20 Pin Front Panel Female Header / NOTE: Does not convert from 5GB/s to 10GB/s.
  • Easy way to access USB-C and support front panel header, doesn't require to have latest motherboard to experience USB-C technology..
  • ** Note on USB current over limit issue: The power from the USB 3.0 header on the motherboard has a power rating at 4.5W (0.9A x 5V). However, many USB-C devices can withdraw power up to 100W (20A x 5V). This may result in a power shut down to protect the motherboard and its components..
Check Stock

Bont FX1 Roller Skate Wheels with 688 Mini Bearings - Derby and Indoor Speed Quad Skating - Pack of 8 with Bearings

  • The Bont FX1 roller skate wheel is an ultra-lightweight, ultra-high-performance roller skate wheel. With super high rebound urethane combined with a unique mini bearing hub for fast acceleration and quick laterals.
  • The Bont FX1 wheel is great for roller derby or indoor rink skating. It is one of the only wheels on the market that uses the smaller 688 or 167 bearings rather than the traditional 608 skate bearing..
  • The mini roller skate bearing saves 12 grams per bearing and a whopping 192 grams (6.8oz) on a set of skates. That is a pretty huge weight saving. The mini bearings also spool up faster than 608 bearings getting you up to speed sooner for greater acceleration.
  • The 688 mini roller skate bearing has an exceptionally fine polished bearing track surface and incredibly precise balls. The lightweight plastic cages allow for lower rolling resistance.
  • Standard 60mm diameter by 38mm wide with 92A hardness. Comes in a set of 8 with 688 bearings.
Check Stock

Goliton USB 3.1 Front Panel Header to USB 3.0 20Pin Header Extension Cable 20cm Compatible for ASUS Motherboard

  • USB 3.1 require a different front panel header than USB 3.0.
  • The USB 3.1 port interface is using the USB 3.0 pin set and more.
  • It is design to be backwards compatible (will explain later).
  • There are no official release of the specs for the USB 3.1 header yet (as of this writing), But first motherboard with this is the ASUS ROG MAXIMUS IX....
  • Connector1: USB 3.0 Front Panel Header. Connector2: USB 3.1 Front Panel Header..
Check Stock

VHT Satin Clear Header Paint

  • Genuine Mopar Header Orange Touch Up Paint.
  • Mopar Header Orange Touch Up Paint - 5163996AB - Part#5163996AB.
Check Stock

Jones Exhaust AHB2

  • 3.00 Inch Header Buddy Collector Kit 3.00 Inlet 2.25 Outlet 3 Bolt Flange Jones.
  • 2 Flanges 2 Collectors and 6 Nuts and Bolts Included.
  • HEADER BUDDY Is An Innovative, New Design For Header/Exhaust Assembly That Requires NO GASKET.
Check Stock

Xiwai USB 3.1 Front Panel Header to USB 3.0 Type-A Female Extension Cable 50cm Panel Mount Type

  • USB 3.1 Front Panel Header to USB 3.0 Type-A Female Extension Cable 50cm Panel Mount Type Length: 50cm.
  • USB 3.1 require a different front panel header than USB 3.0..
  • The USB 3.1 port interface is using the USB 3.0 pin set and more. It is design to be backwards compatible (will explain later). .
  • There are no official release of the specs for the USB 3.1 header yet (as of this writing),  But first motherboard with this is the ASUS ROG MAXIMUS....
  • Connector1: Type-A USB3.0 Female Connector2: USB 3.1 Front Panel Header.
Check Stock

MakerSpot Prototyping Board for Raspberry Pi 2 Pi 3 A+ B+ Pi4 v2.2 Soldered with Female Connectors with Pin Header Set in Extra Long & Short Length

  • 348 holes of prototyping area, Full breakout of the 40-pin Pi Header.
  • Holes are connected in row and column groups.
  • Silkscreen marking for 40-pin Pi Header reference.
  • High quality HASL PCB finishing, D0.9mm drill holes and D1.9mm pad size.
  • Pin Headers set: 1 x extra long 40-pin (length: 12mm) stacking header, 1 x short 40-pin (length: 6mm) stacking header.
Check Stock

Cablecc USB 3.1 Front Panel Header to USB 3.0 20Pin Header Extension Cable 20cm for ASUS Motherboard

  • The cable only support usb3.1/usb3.0 device, it can't work at USB2.0(480Mbps).
  • USB 3.1 require a different front panel header than USB 3.0. The USB 3.1 port interface is using the USB 3.0 pin set and more. It is design to be backwards compatible (will explain later)..
  • There are no official release of the specs for the USB 3.1 header yet (as of this writing), But first motherboard with this is the ASUS ROG MAXIMUS IX FORMULA,STRIX Z270I/Z270G etc..
  • Connector1: USB 3.0 Front Panel Header Connector2: USB 3.1 Front Panel Header.
Check Stock