ReviewsHeaders And Manifolds

JEGS Aluminum Color Exhaust Header Paint | Made In USA | Resists Heat Up To 1200 Degrees F | 12 oz Aerosol Spray | Heat Cure At 400 Degrees Fahrenheit For 2 Hours

IDEAL FOR headers, manifolds, mufflers, exhaust pipes, diesel stacks, and furnaces.
DESIGNED TO WITHSTAND TEMPERATURES up to 1200 degrees Fahrenheit on a continuous basis.
MADE IN USA with high quality components and production.
CREATES A porcelain-like bond at high temperatures and resists peeling, loss of adhesion, and blistering.
HEAT CURE at 400 degrees Fahrenheit for 2 hours.

Check Stock

COMP Cams CL12-234-2 Xtreme Energy 212/218 Hydraulic Flat Cam and Lifter Kit Chevrolet Small Block

Strong torque thru low end and mid-range, good idle..
212/218 Duration at .050". 110 Degree Lobe Separation Angle. 0.447"/0.454" Valve Lift.
CL Kits include a camshaft, a set of lifters, instructions and assembly lubricant..
Excellent performance in street carbureted applications. Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve..
More vacuum allows an increase in duration for improved performance and assists power brakes. Best performance with aftermarket intake manifolds, headers and lower gear ratios..
Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer..

Check Stock

JEGS Black High Temperature Resistant Paint | 12 oz Aerosol Spray | Resists Heat up to 1200 degrees F | Heat Cure at 400 degrees F for 2 hours | Not for Use with Primer | Made In USA

IDEAL FOR headers, manifolds, mufflers, exhaust pipes, diesel stacks, and furnaces.
DESIGNED TO WITHSTAND TEMPERATURES up to 1200 degrees Fahrenheit on a continuous basis.
MADE IN USA with high quality components and production.
CREATES A porcelain-like bond at high temperatures and resists peeling, loss of adhesion, and blistering.
HEAT CURE at 400 degrees Fahrenheit for 2 hours.

Check Stock

LSX Header Bolts for LS1 LQ4 LQ9 LS9 4.8 5.3 6.0 6.2L Grade 10.9 Silverado Tahoe (Iron)

These bolts are made with hardened Grade 10.9 steel, and can withstand a minimum tensile strength of 150,000PSI..
Flange Bolts are identified by the built-in washer under the head that acts to distribute the clamping load over a greater area..
They are designed to provide the same holding power as if you were to use a washer..
These bolts are superior to original or OEM product, and are made to withstand high strength and extreme conditions, generally found in Motorsports!.
Fits: LS1, LS2, LS3, LS6, LS7, LS9, GM Vortec 4.8 5.3 6.0 6.2L with OEM Exhaust Manifolds & Aftermarket Headers..

Check Stock

Refillable Stream and Spray Colored Squirt Bottles - 12oz Refillable Mister Bottle for Cleaning Solutions, Gardening, Grooming and Hair Salon COLORS MAY VARY | 3-BOTTLES

Gas and oil resistant. Ideal for automotive parts exposed to intermittent temperatures upto 2000°F including exhaust, manifolds headers and more.
Stops rust formula. Rust preventive formula resists oil, gas, grease and environmental elements including rust, salt, humidity and more.
Any-angle spray with comfort tip. Dries to touch in 30 minutes and covers upto 10sqft. For optimal performance allow product to fully cure according to instructions on label.
Durable, long-lasting finish, provides a protective finish that hels items last.
Any-angle spray technology allows the can to be sprayed in any direction, even up side down.

Check Stock

CRC Copper Anti-Seize & Lubricating Compound SL35903-16 Wt Oz, Anti-Seize Grease for Fittings, Bushings, Flanges, Headers

CRC INDUSTRIES: A market leader that offers impeccably designed chemical solutions to maintain, protect and repair different marine, heavy-duty motor vehicles, industrial-grade engines, household tools, and electrical equipment.
GENERAL PURPOSE ANTI-SEIZE LUBE: Our anti-seize lubricant prevents seizing caused by high temperatures, heavy loads, corrosion, and vibrations..
COPPER FORMULA: This anti-seize lube has a unique formula that is steam and water resistant. It prevents galling, seizing, rust, and corrosion..
APPLICATION: This copper anti-seize lubricant is ideal for fittings, bushings, flanges, headers, nuts, screws, studs, threaded surfaces, pipes, plugs, and manifolds..
PRODUCT SPECIFICATIONS: Copper Anti-Seize Lube is available in a 16 wt oz. bottle, and comes with a brush top lid for easy application..

Check Stock

CRC Nickel Anti-Seize & Lubricating Compound SL35911 - 8 Wt. Oz., Anti-Seize Grease for Fittings, Bushings, Flanges, Headers

CRC INDUSTRIES: A market leader that offers impeccably designed chemical solutions to maintain, protect and repair different marine, heavy-duty motor vehicles, industrial-grade engines, household tools, and electrical equipment.
GENERAL PURPOSE ANTI-SEIZE LUBE: Our anti-seize lubricant prevents seizing caused by high temperatures, heavy loads, corrosion, and vibrations..
COPPER FORMULA: This anti-seize lube has a unique formula that is steam and water resistant. It prevents galling, seizing, rust, and corrosion..
APPLICATION: This copper anti-seize lubricant is ideal for fittings, bushings, flanges, headers, nuts, screws, studs, threaded surfaces, pipes, plugs, and manifolds..
PRODUCT SPECIFICATIONS: Copper Anti-Seize Lube is available in a 8 wt oz. bottle, and comes with a brush top lid for easy application..

Check Stock

EVIL ENERGY 2.0' Exhaust Narrow Band Muffler Seal Clamp Stainless Steel 2PCS

Joins 2.0 inch OD pipe to 2.0 inch ID pipe. Exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as pipes, mufflers, catalytic converters, headers, manifolds. Torque: 63 N·m. Package: 2pcs..
Connection Type: ID-OD slip fit connection with either straight or "Z" compression slit. This narrow exhaust band clamp commonly use on slotted pipes or stainless steel connection where disassembly for service is likely..
Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion. Material: 304 stainless steel strap and mild steel hardware, serviceability, durability and reusable..
Easy to handle and disassemble. Suggestion: Wrap the pipe with several layers of aluminum tape over the clamping surface to take up for slight out-of-round and help seal..
EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service..

Check Stock

Walter 53D854 Rock'n Roll Ceramic Anti-Seize Lubricant [Pack of 12] - 300g Lubricant Paste with a Brush, Non-Toxic White Lubricant. Anti-Seizing Lubes

CRC INDUSTRIES: A market leader that offers impeccably designed chemical solutions to maintain, protect and repair different marine, heavy-duty motor vehicles, industrial-grade engines, household tools, and electrical equipment.
GENERAL PURPOSE ANTI-SEIZE LUBE: Our anti-seize lubricant prevents seizing caused by high temperatures, heavy loads, corrosion, and vibrations..
NICKEL FORMULA: This anti-seize lube has a unique formula free of copper, lead, sulfides, and chlorides. It boasts high temperature and chemical resistance..
APPLICATION: This nickel anti-seize lubricant prevents seizing and galling of surfaces. It is ideal for catalyst beds, reaction chambers, special alloy fittings, bushings, flanges, headers, nuts, screws, studs, threaded surfaces, pipes, plugs, and manifolds..
PRODUCT SPECIFICATIONS: Nickel Anti-Seize Lube is available in a 8 wt oz. bottle, and comes with a brush top lid for easy application..

Check Stock

Z Whip BBC Stainless-Steel Exhaust Header Bolt Kit 1” 3/8-16 Bolts and Washers Compatible with Chevrolet V8 Big Block V8 Engines 1958-2000 348 366 402 409 427 396 454 502 7.4L TBI Vortec

Compatible with all 1958-2000 Chevy Big Block Exhaust Headers with up to ½” Thick Flanges 348 366 402 409 427 396 454 502 (These do not fit oem manifolds).
These are High Grade 18-8 Stainless-Steel Steel 3/8-16×1” Bolts and Washers That will NOT rust or Corrode like the chrome or steel ones sold. These Use a 5/16” Allen Wrench/Socket.
We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce..
When you purchase Z Whip Parts you will always get the highest quality for your vehicle that you rightfully deserve.
Meets or Exceeds Industry Standard ASME / ANSI Specifications.

Check Stock

WONGWAI 4 PCS 2.5 Inch 2 1/2 Butt Joint Exhaust Band Clamp Sleeve, Stainless Steel Exhaust Clamp for Exhausts, Mufflers, Downpipes

... exhaust pipe, muffler, or exhaust tubing in the exhaust system..
WIDE APPLICATIONS - These butt joint band clamps have removable and reusable bolts and nuts, which makes them durable and sturdy. They can be easily installed accurately without welding. They are suitable for exhausts, mufflers, downpipes, headers and manifolds..
MONEYBACK GUARANTEE - WONGWAI promises to provide you with a refund if you find any issue with our products in 30 days so that you can rest assured that you make the right choice. If you have any questions regarding our butt joint exhaust band clamp sleeve, please feel free to contact us, and we will make sure to provide the best service..

Check Stock