ReviewsHeadlight Alignment Bushing

Cardone 96-1008R New Power Steering Pump with Reservoir

  • 100% computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
  • Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
  • Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
  • Units are supplied with reservoir and cap (when applicable) to reduce installation time and prevent contamination from trapped debris.
Check Stock

Cardone Select 96-8704 New Power Steering Pump with Reservoir

  • 100% computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
  • Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
  • Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
  • Units are supplied with reservoir and cap (when applicable) to reduce installation time and prevent trapped debris.
Check Stock

1/4' Beadlock® Tenon Stock, (25) 1-1/2' Pieces

  • So Fast, So Easy, So Accurate. The arms of self centering dowel jig jig are an always-reliable parallelogram that never fails to find dead center. Simply align the precision-machined notch on the jig's center bar with the dowel location mark on your board, hold the jig and drill..
  • The second alignment feature lets you drill a series of equally spaced holes along the edge of a board. Just attach the supplied pin in the center bar, insert the pin in a hole and drill more holes..
  • Attach the jig's adjustable center bar end-stop for drilling two or three precisely spaced end grain holes. This feature allows perfect alignment of face frame stiles and top and bottom rails. The handy inch scale lets you accurately set the stop..
  • Adjustable width for different thick，For stock from 5/8" to a full 1” thick and more. The parallel arms open to accommodate stock up to 2.4” thick..
  • High quality aluminum (drill guide) and die steel(bushing),high hardness and strength,good wear-resistant and durable to use,the drill bushings is in imperial (inch) sizes,1/4" 3/8" 5/16" ,not metric..
Check Stock

AUTOTOOLHOME Self Centering Doweling Jig Punch Locator Dowel Jig Kit 1/4 3/8 5/16inch Drill Guide Sleeve Tool for Woodworking Joinery

  • So Fast, So Easy, So Accurate. The arms of self centering dowel jig jig are an always-reliable parallelogram that never fails to find dead center.....
  • The second alignment feature lets you drill a series of equally spaced holes along the edge of a board. Just attach the supplied pin in the center....
  • Attach the jig's adjustable center bar end-stop for drilling two or three precisely spaced end grain holes. This feature allows perfect alignment of....
  • Adjustable width for different thick，For stock from 5/8" to a full 1” thick and more. The parallel arms open to accommodate stock up to 2.4”....
  • High quality aluminum (drill guide) and die steel(bushing),high hardness and strength,good wear-resistant and durable to use,the drill bushings is in....
Check Stock

Hornady Match Grade 2 Die Set, 6.5 Creedmoor (.264) (544655) - Caliber Specific Reloading Equipment for Handloaders with Full Length Sizer Die, Seating Die with Roll Crimp, Sure-Loc Rings, & Storage

  • ...polished elliptical expander to reduce friction and case-neck stretch. The dimension of the bushing (inside diameter, listed) determines the neck size when the brass is inserted into the die.
  • Seating Die - features seater adjustment screw, built-in crimper, locking retainer spring as well as a floating bullet seater alignment sleeve and seating stem, which pre-aligns the bullet and case before seating occurs. Hornady Bushings work in both the neck and full length Match Grade dies. The bushings are available in .001" increments..
  • Precise Machining for Accurate Reloading - Hornady reloading dies are designed for a true match to your chamber. Keep several appropriate Hornady die sets for each caliber size at your reloading bench. Bushing die sold separately. Includes a full length sizer die, seating die with roll crimp, plastic storage box, two Sure-Loc rings, elliptical expander, and headed decapping pins.
Check Stock

Hornady Match Grade 2 Die Set, 338 LAPUA MAG (.338) (544399) - Caliber Specific Reloading Equipment for Handloaders with Full Length Sizer Die, Seating Die with Roll Crimp, Sure-Loc Rings, & Storage

  • ...polished elliptical expander to reduce friction and case-neck stretch. The dimension of the bushing (inside diameter, listed) determines the neck size when the brass is inserted into the die.
  • Seating Die - features seater adjustment screw, built-in crimper, locking retainer spring as well as a floating bullet seater alignment sleeve and seating stem, which pre-aligns the bullet and case before seating occurs. Hornady Bushings work in both the neck and full length Match Grade dies. The bushings are available in .001" increments..
  • Precise Machining for Accurate Reloading - Hornady reloading dies are designed for a true match to your chamber. Keep several appropriate Hornady die sets for each caliber size at your reloading bench. Bushing die sold separately. Includes a full length sizer die, seating die with roll crimp, plastic storage box, two Sure-Loc rings, elliptical expander, and headed decapping pins.
Check Stock

Kaper II L01-0063 90mm High Beam Projection Headlight

  • Perfect for head lamp replacement on RV s and for custom applications, fits most 90mm headlight application.
Check Stock

O'SKOOL 6-1/2\ Router Acrylic Universal Base Plate Fits Router Porter-Cable, Ryobi, Bosch, Makita, Hitachi, Dewalt

  • Adds visibility by being clear acrylic,quick and easy to mount..
  • Diameter : 6-1/2-Inch.with centering pin and assorted screw sizes to accommodate template guide variations..
  • Prepare your router and the existing base plate and any related hardware. In the fastener package provided, locate the machine screws that match the threads in your router..
  • On the chart on this page,find the model of your router and the corresponding letter that represents the mounting hole pattern on the base plate drawing.Locate the hole pattern on the base plate and mark with wax crayon or felt tip marker..
  • Ensure your router has a 1/4" collet installed and place the universal base onto the router lining up the marked mounting holes.Install the choosen machine screws but do not tighten. Insert the enclosed alignment pin into the 1/4" collet until it almost contacts the guide bushing. Tighten the collet lightly onto the pin. Carefully adjust the router depth so the pin makes contact with the alignment pin.Tighten the machine screws.Note:if the machine screws supplied bottom into the router mounting.
Check Stock

NINEO H7 LED Headlight Bulbs,CREE Chips 12000Lm 5090Lux 6500K Extremely Bright All-in-One Conversion Kit,360 Degree Adjustable Beam Angle

  • SUPER BRIGHT – Utilizing Customized CREE Chips,each led headlight bulb can light up to 5090 lux and 6000 [email protected] extremely white light with perfect beam pattern,5 times brighter than stock halogen,beating 95% lower intensity LED and HID kit on the market..
  • ADJUSTABLE MOUNTING – Besides brightness,we have designed the latest 360 degree fully adjustable mounting collar,you can make a simple angle adjustments for proper alignment of the bulb mounts to get the perfect light output and correct beam pattern..
  • 360 DEGREE LIGHT DISTRIBUTION – Boldly Utilizing ultra-thin side design,LED side face only has 3.45 mm,ensure 360 Degree uniform light without any dark spot,provide wider viewing angle,ensure your safety..
  • MAXIMUM HEAT DISSIPATION – Unique coverless dual ball bearing fan design,combined 12,000 rotations per minute,and built with double folding copper core thermal heatsink,ensure maximum heat dissipation,make NINEO headlight shine up to 30,000 hours..
  • EASY INSTALLATION – The heatsink part only has 23.5 mm length,fit for 95% vehicle,after installation,there are enough space for the headlight breathing. Can be installed in 20 mins.Plug and play. And we offer 1 year warranty and lifetime support..
Check Stock

Kreg KMA3225 Shelf-Pin Jig 1/4' (6 mm)

  • Two edge alignment knobs position the cup hole from the edge of the door, while the edge pin sets the distance from the top/bottom..
  • The drill guide with metal bushing locks into jig and creates a perfectly straight hinge cup hole.
  • Guide bushings built into body of drilling jig leta you pre-drill pilot holes in 4 common locations, making sure hinges are straight and door closes true. The 1/16″ diameter drill bit for pilot holes is included..
  • Easily set your cup hole depth on the included 35mm drill bit using the built-in depth setting fixtures on the left and right side..
  • The hinge marking guide detaches from bottom of jig and allows you to transfer and mark center lines and hinge location to cabinet wall or frame.
Check Stock

Zfyoung 8" Professional Pruning Shears, Bypass Pruners, Pruning Scissors, Garden Shears, Garden Scissors, Gardening Shears, Garden Clippers, Garden Shears Pruning, Garden Supplies, Garden Tools

  • Strong Angled Frame – The Lock-N-Load Classic has a high strength, uniquely angled alloy machine frame delivers both dependability and precision. Also offers greater visibility and easier access to the cartridge.
  • Quick and Easy – Designed to assure perfect die and shell holder alignment, its Lock-N-Load quick change bushing system also makes the process quick and easy. Switch from one die to another in a matter of seconds. Quickly remove and re-install without the need to readjust the die or keep a separate seater die for each of your pet loads.
  • Easy Grip Handle – The large, ball-style handle reduces fatigue. The long handle increases leverage and reduce effort. The Power-Pac linkage and solid steel arm multiplies the leverage you apply to the handle, making is easier to size cases and reduces fatigue.
  • How to Use – Simply set the die and tighten the Sure-Loc ring on the Lock-N-Load bushing. Quickly remove and re-install without the need to readjust the die or keep a separate seater die for each of your pet loads. Dies, bushings, and shellholders sold separately..
Check Stock