ReviewsHeat Precess Parts Processing

uxcell Brass Sheet, Metal Sheets Plates 5.9\ Length x 5.9\ Width x 0.03\ Thickness

  • Size: 0.8mm/0.03" Thickness, 150mm x 150mm/5.9" x 5.9"(L*W).
  • Made of brass material, which has good mechanical properties and good machinability, can withstand hot and cold pressure processing.
  • Brass sheet can be processed to various parts, such as gaskets, Washer.
  • Applications: DIY projects, hobbies, crafts, building decoration, industrial, conduction heat, and so on.
Check Stock

Scotch-Brite Surface Conditioning Belt, 2 in x 72 in, A MED, 10 per case

  • Nonwoven, surface conditioning belts clean, blend, deburr and finish.
  • Reduced loading and heat build-up allow extended operating time and consistent surface conditioning results.
  • Conformability allows abrasive to stay in contact with complex-shaped parts in robotic processing.
  • Reinforced backing and nonwoven open web material provide superior flexibility for detail work, over contours and edges.
  • Removes surface imperfections, grind lines, mill, and other marks.
Check Stock

uxcell Brass Sheet, Metal Sheets Plates 3.9\ Length x 3.9\ Width x 0.02\ Thickness 2pcs

  • Size: 0.5mm/0.02" Thickness, 100mm x 100mm/3.9" x 3.9"(L*W).
  • Made of brass material, which has good mechanical properties and good machinability, can withstand hot and cold pressure processing.
  • Brass sheet can be processed to various parts, such as gaskets, Washer.
  • Applications: DIY projects, hobbies, crafts, building decoration, industrial, conduction heat, and so on.
Check Stock

uxcell Brass Sheet, Metal Sheets Plates 3.9\ Length x 3.9\ Width x 0.06\ Thickness 2pcs

  • Size: 1.5mm/0.06" Thickness, 100mm x 100mm/3.9" x 3.9"(L*W).
  • Made of brass material, which has good mechanical properties and good machinability, can withstand hot and cold pressure processing.
  • Brass sheet can be processed to various parts, such as gaskets, Washer.
  • Applications: DIY projects, hobbies, crafts, building decoration, industrial, conduction heat, and so on.
Check Stock

GBJ 10pcs SP200 GTN-2 Grooving Cut-Off Carbide Inserts for SPB26-2 SPB32-2 Blade Grooving Slotting Tool Cut Off Plate Tool

  • ☞ Inserts Material : Carbide inserts with CVD Coating. Coating endows inserts strong impact resistance, good versatility with high precision, high finish and high wear resistance..
  • ☞ Insert Applicaiton: Suitable for Stainless steel parts processing..
  • ☞ Inserts Feature: Wear-resistant and heat-resistant, not easy to stick to the holders or workpieces or break up. Vacuum hardening, exquisite craftsmanship, easy cutting..
  • ☞Advantage: Wear-resistant and heat-resistant, not easy to stick to the holders or workpieces .Vacuum hardening, exquisite craftsmanship, easy cutting..
  • ☞Package includes: 10pcs SP200 Gold Grooving cut-off inserts.
Check Stock

LittleMachineShop.com SIEG Mini Mill X2D - 350 Watt Variable Speed include R8 Spindle Taper

  • ...ing the tool post angle and adjusting the compound rest. The professional slide is designed with abrasive resistance, moving blades freely with a feed rod..
  • Wide Application: Home workshop-friendly size. Driven by the quality motor, this mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing, and modeling works..
Check Stock

Micarta Paper XX Phenolic Sheets .188\ (3/16\) Thick x 12\ x 36\ 3 pcs

  • ...-conductivity, high temperature resistance, and high strength, it is widely used in electrical products..
  • Bakelite board is also called phenolic laminated paperboard. It made of phenolic resin made from high-purity, Wood boards made of resin adhesives..
  • Good electrical performance at room temperature, good mechanical processing performance, specific gravity 1.45, warpage ≤ 3‰, with excellent electrical, mechanical and processing properties..
  • The insulating board is suitable for insulating structural parts in motors and electrical equipment with high mechanical performance requirements. Good mechanical strength, mainly used in the processing of insulating parts in test fixtures, silicon rubber button molds, fixture plates, mold splints, table polishing pads, packaging machines, tea trays, combs, etc..
Check Stock

GBJ 10pcs APMT1604 PDER ZM Milling Inserts Turning Inserts Cutting Tools ZM1135 for BAP400R Milling Inserts Tool Holders Processing Hard Steel Parts (APMT1604PDER Purple)

  • ☞ Model: APMT1604 PDER , Coating: CVD, Material: Carbide, Heat treatment makes inserts harder..
  • ☞Application: Especially suitable for processing hard steel parts (eg. 4140 alloy steel ) and stainless iron, suitable for material of HRC15 °- HRC45 °,installed on 400R Series End milling holder.
  • ☞Coating: CVD , Coating endows inserts strong impact resistance, good versatility with high precision, high finish and high wear resistance..
  • ☞Advantages : The carbide matrix combination with the AlTiN coating of composite multilayer structure greatly prolongs service life of cutting tool , has super strong film-base bonding force and extremely low friction coefficient ..
  • ☞Package includes: 10pcs APMT1604PDER ZM1135 carbide inserts for hard steel parts..
Check Stock

2 Pcs 3/4 inch (Diameter) 3:1 Waterproof Heat Shrink Tubing Kit, Large Marine Dual Wall Adhesive Shrinkable Wire Wrap Tube, Insulation Sealing Cable Protector by YUKSY (4ft, Black & Red)

  • ...s thick and stays stuck, the tube snug around the wire, or cable and also closes around the connector. And give you a tidy connection or electrical insulation..
  • Widely Use - Our heat shrink tubing are widely used in wire connection, rust prevention and corrosion protection of solder joints, protection and insulation processing of wire end, wiring harness and electronic components, and audio and electrical DIY. Fitness equipment parts and steel structure surface protection and so on..
  • Easy Use and Fast - You just use a heat gun heat it evenly until it wrap the wire or connector tightly. It is a 3:1 heat shrink ratio and will shrink to the original 1/3. (Temperature of your heat gun is up to 212℉, then glue inside will soften and seal the connection.).
  • Safe & ECO-Friendly - Our heat shrink tubing are UL certified, RoHS compliant, which ensures its safe and environmental protection. Protect you and your family..
  • Multiple Size - This is 2 pcs 4 feet long 3/4" in diameter large heat shrink tubing black and red (Note: it is 3/4" in round diameter, but not 3/4" in width). Other sizes also available in our store, like 1/2.
Check Stock

TJPoto Clutch Cover Chain Brake Assembly 544097902 544097901 445 440 Chainsaw Replacement Part new For Husqvarna

  • Quality assurance :Well-designed, excellent processing. Made of highly durable materials, rigorously tested, compact & sturdy, longevous. Non OEM parts but meets OEM manufacturing requirements. Easy to install, saves time and money..
  • Made from durable high quality material and well-tested by the manufacturermade from durable high quality material and well-tested by the manufacturer.
  • Please confirm your model above before ordering..
  • This is a manufacturer substitution. Functional equivalent to prior parts.Product Description Well-designed, excellent processing. Made of highly durable materials, rigorously tested, compact & sturdy, longevous..
Check Stock

1/2 inch (Diameter) 3:1 Waterproof Heat Shrink Tubing Kit, Large Marine Dual Wall Adhesive Shrinkable Wire Wrap Tube, Insulation Sealing Wear-Resistant Cable Protector by YUKSY (4ft, Black)

  • ...s thick and stays stuck, the tube snug around the wire, or cable and also closes around the connector. And give you a tidy connection or electrical insulation..
  • Widely Use - Our heat shrink tubing are widely used in wire connection, rust prevention and corrosion protection of solder joints, protection and insulation processing of wire end, wiring harness and electronic components, and audio and electrical DIY. Fitness equipment parts and steel structure surface protection and so on..
  • Easy Use and Fast - You just use a heat gun heat it evenly until it wrap the wire or connector tightly. It is a 3:1 heat shrink ratio and will shrink to the original 1/3. (Temperature of your heat gun is up to 212℉, then glue inside will soften and seal the connection.).
  • Safe & ECO-Friendly - Our heat shrink tubing are UL certified, RoHS compliant, which ensures its safe and environmental protection. Protect you and your family..
  • Multiple Size - This is 4 feet long 1/2" in diameter large heat shrink tubing (Note: it is 1/2" in round diameter, but not 1/2" in width). Other sizes also available in our store, like 3/4", 1" ,1.5", 2". our worry-free 24-month and friendly customer service ensure pleasant shopping experience..
Check Stock