ReviewsHeat Resistant Alloys

4\ Slayer Resin filled Turbo Cup Wheel Alum Backer - Fine

  • Wheel edge can be dressed for effective deburring, finishing and polishing of all metal alloys and many plastics and composites.
  • Tough, layered, unitized construction can operate clockwise or counterclockwise directions.
  • Densities and grades ranging from soft and conformable to hard and aggressive offer utility for a wide variety of applications.
  • Resists smearing for cleaner surfaces and less preparation.
  • Minimizes heat build up to lessen impact on heat-sensitive materials.
Check Stock

Supercut Bandsaw Supercut Made in USA 70 1/2-inch x 3/8-inch x .025 x 4 Hook Premium Carbide Infused Bandsaw Blade for Cutting Wood Materials

  • 100% MADE IN THE USA - Not made anywhere else but the USA..
  • 100% LIMITED LIFETIME WELD WARRANTY - Fatigue resistant premium carbon tool steel blade is built with the toughest alloys fused by our superior weld..
  • LESS HEAT & CHATTER – Aggressive alternate hook tooth and polished design allows the blade to freely move through the material..
  • CLEAN CUTS – Precision ground, razor sharp teeth, polished back and sides for reduced friction and the cleanest cuts possible..
  • MINIMAL WASTE – The best blade for the serious woodworker cutting exotic woods, where waste is not an option..
Check Stock

Midwest Tungsten Service TIG Welding Tungsten Electrodes 10-Pack Blue - 2% Lanthanated Tungsten WL20/EWLa-2 3/32

  • PREMIUM ten (10) pack of 3/32" tungsten electrodes for TIG welding for the beginner, intermediate, and professional TIG welder. From students to industrial and artistic users, these fit your use.
  • HIGHEST RATED and most reviewed 2% Lanthanated Tungsten TIG electrodes on Amazon ready to help you make the perfect weld. Noted for their reliability and consistent performance..
  • EXCEPTIONAL for both AC & DC applications and for welding aluminum alloys, magnesium alloys, nickel alloys, copper alloys, titanium alloys, low-alloyed steels, and non-corroding steels.
  • UNITED STATES based manufacturing & knowledgeable customer service staff are here to help you pick the perfect TIG tungsten for your welding job, large or small..
  • FREE materials safety data sheet (MSDS) and certificate of conformance linked below, the tungsten electrodes adhere to American Welding Society standard A5.12M/A5.12:2036.
Check Stock

Led Wall Pack Light 120W 16200lm with photocell 840W HPS/HID Equivalent Dusk to Dawn Wall Pack led 5000K Commercial led Wall Pack Outdoor

  • ☘120W Led Wall Pack is uses aluminum alloys waterproof IP65 body can be very shatter resistant and handle all weather conditions., it is a suitable outdoor LED Wall Light used widely for buildings and outdoor areas.
  • ☘High quality chip --much brighter and more durable and have automated dusk-to-dawn photocell functionality light OFF at sunrise/daytime and light ON at sundown/night.
  • ☘LED wall pack light 120w saving over 80% on your electricity bill by replacing 650-840W halogen floodlight and MH/HIP/HID bulbs.
  • ☘Super Bright | Saves Energy | NO Flickering | Contains NO mercury | Emits NO UV/IR Light | Waterproof IP65 Rated | Heat and Impact Resistant | Anti-Leakage Silicone Gaskets | More Durable.
  • ☛Warranty for 5 years☚If you have problem with our led wall pack light or if you want to seek warranty, please contact us through Amazon Buyer-Seller Messaging Service, we will further assist you.
Check Stock

Tungsten Electrodes for Tig Welding 2% Grey Ceriated Tungsten Assorted- 5PCS 3/32 + 5PCS 1/16

  • Premium 10PK tig welding tungsten electrodes 2% ceriated gray WC20/EWCe-2, 5PCS 1/16" & 5pk 3/32" ceriated tungsten electrodes for tig welding.
  • The ceriated tungsten tig electrode is with high performance: No spitting,stable consistent arc starts and good stability with low burn-off rate..
  • The 2% ceriated tungsten electrode perform reliably and consistently even in high current range on AC&DC applications for welding copper alloys, nickel alloys, titanium alloys,low-alloyed steels,magnesium alloys and aluminum alloys.
  • The tungsten electrodes adhere to American Welding Society AWS standards,great for beginner to professional tig welder for tig welding works.
  • Package including: 5PCS 1/16" & 5PCS 3/32" by 7"length 2% grey ceriated tungsten, Tungsten Electrode Size: 3/32" x 7"(2.4mm x 175mm )AND 1/16" x 7"(1.6mm x 175mm).Warm tips:We'll send the tungsten electrodes with old and new package at random. We guarantee with the same high quality.
Check Stock

Norton 66253370793 Unitized & Convolute Wheels Size 4-1/2 x 1/4 x 5/8-11

  • Wheel edge can be dressed for effective deburring, finishing and polishing of all metal alloys and many plastics and composites.
  • Tough, layered, unitized construction can operate clockwise or counterclockwise directions.
  • Densities and grades ranging from soft and conformable to hard and aggressive offer utility for a wide variety of applications.
  • Resists smearing for cleaner surfaces and less preparation.
  • Minimizes heat build up to lessen impact on heat-sensitive materials.
Check Stock

YG-1 EH970 Carbide Square Nose End Mill, Long Reach, TIALN Multilayer Finish, Roughing Cut, 45 Deg Helix, 4 Flutes, 2.5\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter

  • Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills.
  • Fine-pitch tooth design and tool geometry are suitable for machining steel up to Rockwell hardness C45, stainless steel, titanium alloys, and nickel-based alloys.
  • Long-reach end mills have an extended shank for access to recessed areas of the workpiece.
  • Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Check Stock

Scotch-Brite Multi-Finishing Wheels - 3m s/b 6x2x1 2scrs048011-13176

  • Wheel edge can be dressed for effective deburring, finishing and polishing of all metal alloys and many plastics and composites.
  • Tough, layered, unitized construction can operate clockwise or counterclockwise directions.
  • Densities and grades ranging from soft and conformable to hard and aggressive offer utility for a wide variety of applications.
  • Resists smearing for cleaner surfaces and less preparation.
  • Minimizes heat build up to lessen impact on heat-sensitive materials.
Check Stock

3mirrors ALUMINUM Tungsten Electrode Sharpener Grinder Head TIG Welding Tool with Cut-Off Slot Multi-Angle & Offsets, 5X 25mm Double Diamond Wheels, 1X Connecting Rod

  • Premium 10PK purple rare earth blend (EWG) tig welding tungsten electrodes , 5pk 1/16" & 5pk 3/32" purple tungsten electrodes for tig welding.
  • The purple tungsten tig electrode is with great welding performance: non radioactive, reliable arc-striking, low burn-off rate and good stability with low burn-off rate..
  • The rare earth blend tungsten electrode perform reliably and consistently even in high current range on AC&DC applications for welding copper alloys, nickel alloys, titanium alloys,low-alloyed steels,magnesium alloys and aluminum alloys.
  • The tungsten electrodes adhere to American Welding Society AWS standards,great for beginner to professional tig welder for tig welding works.
  • Package including: 5PCS 1/16" & 5PCS 3/32" by 7"length rare earth blend (EWG) tungsten, Tungsten Electrode Size: 3/32" x 7"(2.4mm x 175mm )AND 1/16" x 7"(1.6mm x 175mm).Warm tips:We'll send the tungsten electrodes with old and new package at random. We guarantee with the same high quality.
Check Stock

SIGNI Light Deburring polishing convolute Wheel 12X1X5 7S FIN,1 Pack

  • Wheel edge can be dressed for effective deburring, finishing and polishing of all metal alloys and many plastics and composites.
  • Tough, layered, unitized construction can operate clockwise or counterclockwise directions.
  • Conformability allows abrasive to stay in contact with complex-shaped parts in robotic processing.
  • Densities and grades ranging from soft and conformable to hard and aggressive offer utility for a wide variety of applications.
  • Resists smearing for cleaner surfaces and less preparation.
  • Minimizes heat build-up to lessen impact on heat-sensitive materials.
Check Stock

ACDelco Advantage 18A2804AC Coated Front Disc Brake Rotor

  • Manufactured with multiple alloys for improved heat dissipation and performance.
  • Quality validated for proper metallurgy and correct brake plate thickness.
Check Stock