ReviewsHeat Shield Lava Exhaust Wrap

AutoEC Heat Shield Tape, Self-Adhesive Heat Reflective Tape Roll, Adhesive Backed Heat Barrier for Car, Truck, Motorcycle (1.5\X 15')

  • LIGHTWEIGHT: Giant Loop’s Hot Spring Heat Shield is a lightweight heat problem-solver for virtually any motorcycle exhaust system. This exhaust shield protects bags and bodywork from heat damage..
  • PECIFICATIONS: Made of rugged laser-cut aluminum construction, it weighs 3.2oz and measures 6” long X 2-2-3/4″ wide X 7/8″ tall. Includes stainless steel clamp - 27″ circumference, 8″ diameter (conforms to shape of exhaust as it’s tightened, fits every can we’ve seen).
  • UNIVERSAL FIT: Attach to virtually any motorcycle make/model, including dual sport, enduro, adventure touring and sport bike. It is easy to install on any make or model. For full details, read the installation instructions that you’ll find below..
  • RECOMMENDED USE: We recommend using our heat shield to protect your bags and bodywork from your bike’s exhaust system. We include one heat shield with the MoJavi Saddlebag, Coyote Saddlebag and Great Basin Saddlebag and 2 are included with Siskiyou Panniers. Additional heat shields are highly recommended as additional protection for dual exhaust motorcycles..
  • GO LIGHT, GO FAST, GO FAR: Giant Loop started just with a single saddlebag sold online by two adventure motorcycle riders and it’s now one of the most innovative motorcycle so....
Check Stock

Design Engineering 010123 2' x 25' Pipe Wrap Kit with 4 Locking Ties - Titanium

  • Reduces unwanted and harmful heat under the hood, and from entering the driver compartment.
  • Improves horsepower performance and can be used on everyday vehicles, motorcycles, street rods, and more.
  • Wrap sections of exhaust and tail pipe to reduce heat from entering vehicle interior.
  • wrap motocycle pipes to prevent leg burns.
  • Kit includes one roll of 2" x 25' exhaust wrap and four 8" stainless steel locking ties to secure wrap.
Check Stock

Universal Starter Heat Shield Barrier Blanket, prevents premature starter failure - Thermal Zero - Fits starters on Chevrolet, Ford, Chrysler, Small Block, Big Block engines and many more.

  • Simple, easy to install heat shield wrap with an extremely effective radiant heat reflective surface.
  • Very thick aluminized insulation helps to eliminate intermittent starter failure due to radiant heat.
  • Aluminized layer reflects over 90% of radiant heat up to 2000F allowing the starter to last longer..
  • Inexpensive, durable solution for starters solenoids that overheat due to exhaust in close proximity.
  • Material can easily be cut to fit most all starters. Proudly manufactured in the USA.
Check Stock

SunplusTrade 2" x 50' Titanium Exhaust Header Heat Wrap for Motorcycle Cars with Stainless Steel Zip Ties

  • Package includes 2 inch X 50 feet Heat Wrap with (pack of 6) 12" Stainless Steel Locking Zip Ties..
  • Made of premium volcanic rock fiber for the best heat reducing capabilities. The exhaust wrap can withstand 1400F direct/2000F radiant heat..
  • High resistance to abrasions, oil spills, temperatures and vibration breakdown..
  • The thermal heat wrap can reduce heat under hood up to 50%..
  • Universal fitment for cars and motorcycles performance parts - Can be applied to motorcycle exhaust, headers, car exhausts, and any hot metal surfaces..
Check Stock

SunplusTrade 2" x 50' Black Exhaust Header Heat Wrap for Motorcycle Cars Heat Shield with Stainless Steel Zip Tie (2 Pack)

  • Package includes 2 packs of 2 inch X 50 feet Heat Wrap with (pack of 12) 12" Stainless Steel Locking Zip Ties..
  • The exhaust heat wrap can withstand 1400F direct/2000F radiant heat..
  • High resistance to abrasions, oil spills, temperatures and vibration breakdown..
  • The thermal heat wrap can reduce heat under hood up to 50%..
  • Universal fitment for cars and motorcycles performance parts - Can be applied to motorcycle exhaust, headers, car exhausts, and any hot metal surfaces..
Check Stock

Erweater 2 Roll 2″ x 50ft Titanium Exhaust Wrap Header Wrap Roll Kit, for Motorcycle Car Manifold Header Pipe Heat Wrap Tape with 10pcs Stainless Ties

  • Made of high quality thickened fiberglass material with locked edges on both sides for easy breakage. Exhaust pipe wrap can reduce the heat under the hood by up to 50%, improving the performance of cars and motorcycles..
  • It can work for a long time at high temperature from 900 to 1000 degrees Celsius! Stronger and more durable for improved thermal performance and reliability Highly resistant to wear, oil leaks, temperature and vibration damage..
  • Extremely flexible for a tight and secure wrap. Improved horsepower performance for automotive exhaust header wraps, motorcycle exhausts, gas pipes and other custom applications..
  • Soak header heat wrap in water prior to installation so the fiberglass doesn’t fly around. Put on gloves (not included), wrap it around the exhaust pipe, secure it with an overlap (like the grip of a tennis racket), and simply secure the ends with stainless steel ties..
  • Package includes two 2″ x 50 ft rolls of heat wrap, 10 stainless steel zipper ties. If you have any questions or are not satisfied, please feel free to contact us..
Check Stock

Permatex 82099 Spray Sealant, 12 oz.

  • J-B Weld Exhaustweld: A High Strength Fiberglass Wrap, Impregnated With A Specially Formulated Resin For High Temperature Resistant Repairs. Exhaustweld Can Resist Up To 1100°F Once It Is Fully Cured.
  • Cure And Set Time: Exhaustweld Can Cure With Or Without Heat! It Will Cure Within 20 Minutes If Heat Is Applied To It With Either A Heat Gun Or By Letting The Engine Run. Without Heat, Exhaustweld Will Set In 20 Minutes And Cure In 2 Hours.
  • High Heat Resistance: Once Fully Cured, J-B Weld Exhaustweld Exhaust System Repair Wrap Has A Temperature Resistance Of 1100°F, Allowing It To Be Used On Every Part Of The Exhaust System.
  • Applications: Manifolds, Catalytic Converters, Mufflers, Tailpipes And More.
Check Stock

Design Engineering 010110 Exhaust/Header Wrap Kit with Hi-Temp Silicone Coating Spray - Black Wrap/Black Spray

  • Reduces unwanted and harmful heat under the hood, and from entering the driver compartment.
  • Improves horsepower performance and can be used on everyday vehicles, motorcycles, street rods, and more.
  • Wrap sections of exhaust and tail pipe to reduce heat from entering vehicle interior.
  • wrap motocycle pipes to prevent leg burns.
  • Kit includes two rolls of 2" x 50 ft exhaust wrap, 1 can of Hi-Temp silicone coating spray, eight 8" stainless steel locking ties, and four 14" stainless steel locking ties.
Check Stock

Design Engineering 010091 Exhaust/Header Wrap Kit with Hi-Temp Silicone Coating Spray - Tan Wrap/White Spray (Retail Packaging)

  • Reduces unwanted and harmful heat under the hood, and from entering the driver compartment.
  • Improves horsepower performance and can be used on everyday vehicles, motorcycles, street rods, and more.
  • Wrap sections of exhaust and tail pipe to reduce heat from entering vehicle interior.
  • wrap motorcycle pipes to prevent leg burns.
  • Kit includes two rolls of 2" x 50 ft. exhaust wrap, 1 can of Hi-Temp silicone coating spray, eight 8" stainless steel locking ties, and four 14" stainless steel locking ties.
Check Stock

Motorcycle Exhaust Heat Wrap,2" x 32.8' Heat Preservation Anti-Scalding Flame-Retardant Black Glass Fiber Cloth Belt, Automobile Exhaust Heat Strap Roll, With 12 Stainless Steel Cable Ties + Gloves

  • 【Improve the efficiency of the engine】One of the advantages of wrapping the exhaust wrap system for motorcycle owners is that wrapping the pipe with it helps to retain heat in the pipe, helps improve engine efficiency, saves energy, and improves the performance of cars and motorcycles.
  • 【Prevent scalding】When you are riding a motorcycle, the hot exhaust pipe can easily burn your feet or even damage motorcycle riding boots. Use anti-scalding and flame-retardant black glass fiber cloth tape to wrap the exhaust pipe, which can effectively play a role of safety protection.
  • 【Flame-retardant thermal insulation glass fiber cloth tape】Glass fiber is an inorganic non-metallic material with excellent performance. It has the advantages of good heat insulation, high temperature resistance, non-combustibility, etc., which is very suitable as a wrapping tape for exhaust pipes.
  • 【Improve the appearance of your motorcycle】Another advantage of using the Exhaust Heat Wrap is that it helps to improve the appearance of the motorcycle, so that the exhaust pipe will not become black and dirty during long-term use.
Check Stock

Lexx MXe Replacement Exhaust Collar

  • Package includes one 2 inch X 50 feet Heat Wrap with (pack of 6) 12" Stainless Steel (304) Locking Zip Ties..
  • The exhaust heat wrap tape can withstand 1400F direct/2000F radiant heat..
  • High resistance to abrasions, oil spills, temperatures and vibration breakdown.
  • The thermal heat wrap can reduce heat under hood up to 50%.
  • Universal fitment for cars and motorcycles performance parts.
Check Stock