ReviewsHeat Shrink End Caps

Goplus Gym Climbing Rope for Indoor Outdoor Crossfit Exercise, 800lbs Capacity for Fitness Workouts, 1.5’’ in Diameter, No Mounting Bracket Needed, Length Available 10, 12, 15, 18, 20, 25, 30ft

  • ...High Quality Material】Our fitness climbing ropes are made of three strands of durable jute rope. The climbing rope with 1.5 inch diameter has high tensile strength and is resistant to wear, corrosion and rain, which enjoy long service life. It is extremely durable and provides the great grip when in use..
  • 【Heat Shrink End Caps】The end of the rope is heat-shrink sealed with a fine process, and wrapped with a high-quality black rubber sleeve. This will not only prevent the loose ends of the hemp rope, but also provide better grip and protection for your hand, so that you can easily grasp the fitness rope in rope training..
  • 【Versatile Uses】This rope is suitable for all kinds of exercises, such as climbing, up-down waves, tug-of-war, etc. It can be used to build up muscles of the whole body, strengthen your physical strength, and beautify the curves of the body. Both men and female, young and old would like to use this rope for exercise and play..
  • 【Easy to Install Anywhere】The top of the climbing rope has a ring knot for connecting with any solid anchor point, eliminating the need of installing a mounting bracket. You can fix it in your gym for strength training. You can also fix it on the horizontal bar or some fixed points to do climbin....
Check Stock

10pcs 6 Gauge 6 AWG x 5/16” Pure Copper Cable Lug Terminal Ring Connectors with Dual Wall Adhesive Lined Red + Black Heat Shrink Tubing – by WNI

  • Includes pure copper cable lugs + black & red heavy duty dual wall adhesive lined heat shrink tubing. Use selection tabs to choose cable lug gauge/stud size and package quantity..
  • Pure copper cable lugs are designed to fit solid or stranded cable. Cable can be crimped or soldered to cable lug..
  • Cable lug utilizes a closed end design to keep moisture and other contaminants from entering and degrading or corroding the copper cable. Flared cable lug entry hole allows for the easy insertion of cable..
  • Dual wall, polyolefin heat shrink tubing contains a heat activated adhesive/glue which creates a seal to prevent water, solvents, and salts from entering into the cable. Package includes 1.5 inches of heat shrink tubing per cable lug (half black and half red).
  • Heat shrink tubing shrink ratio is approximately 3 to 1 (shrinks to 1/3 of its original diameter). Heat shrink tubing ratings: Temperature: -55°C to 105°C Voltage: 600V.
Check Stock

10pcs 2/0 Gauge 2/0 AWG x 5/16” Pure Copper Cable Lug Terminal Ring Connectors with Dual Wall Adhesive Lined Red + Black Heat Shrink Tubing – by WNI

  • Includes pure copper cable lugs + black & red heavy duty dual wall adhesive lined heat shrink tubing. Use selection tabs to choose cable lug gauge/stud size and package quantity..
  • Pure copper cable lugs are designed to fit solid or stranded cable. Cable can be crimped or soldered to cable lug..
  • Cable lug utilizes a closed end design to keep moisture and other contaminants from entering and degrading or corroding the copper cable. Flared cable lug entry hole allows for the easy insertion of cable..
  • Dual wall, polyolefin heat shrink tubing contains a heat activated adhesive/glue which creates a seal to prevent water, solvents, and salts from entering into the cable. Package includes 1.5 inches of heat shrink tubing per cable lug (half black and half red).
  • Heat shrink tubing shrink ratio is approximately 3 to 1 (shrinks to 1/3 of its original diameter). Heat shrink tubing ratings: Temperature: -55°C to 105°C Voltage: 600V.
Check Stock

Swpeet 100Pcs High Temp Silicone Rubber Protective Tapered Plug Assortment Kit, Masking System Kit Perfect for Powder Coating, Painting, Anodizing, Plating & Media Blasting

  • ★ HIGH QUALITY: Premium quality silicone will not crack, shrink, harden or break. Flexible, durable and reusable. Withstands most chemicals and heat up to 600 degrees Fahrenheit for 20 minutes..
  • ★ WIDE APPLICATIONS: Excellent for masking parts during Powder Coating, Painting, Anodizing, Plating, Media Blasting as well as hundreds of other uses around the home, shop and laboratory..
  • ★ ASSORTED RUBBER TAPERED PLUGS: Swpeet High Temp Silicone Rubber Protective Tapered Plugs including 8 Most Popular Sizes To Fit Any Hole From 1/16" To 3/4", Color coded - easily grab the right size..
  • ★ REASONABLE DESIGN: The tapered design of the stopper style plugs allows them to fit a variety of different hole sizes. The end caps are flexible which allows them to fit most common size studs, bolts, etc..
  • ★ WHAT YOU GET: In this kit, You will get 50Pcs assorted sizes and assorted color high temp silicone rubber powder coating plugs, The versatility of these caps and plugs makes them ideal for many uses not listed here, they are a great addition to almost any toolbox..
Check Stock

The Paris Apartment: A Novel

  • 【What You Get:】 10 Pcs per pack of 1/0 Guage (AWG) 3/8″ ring terminals, copper lugs closed end termination ring terminals with 10 Pcs 3:1 Dual Wall Adhesive Heat Shrink Tubing Tube for your work(5pcs Black and 5pcs Red)..
  • 【Quality Material:】 The TKDMR bare copper battery cable ends are made from 100% annealed copper with special treatment surface for corrosion protection, providing a high degree of conductivity for maximum current flow. Can be Crimped or Soldered.The 3:1 shrink tube is well made of high quality material(UL & CSA certified for up to 600V,257℉）, thick and durable than 2:1 shrink tube..
  • 【Reliable and Easy to Use:】These battery lugs with heavy duty construction,improves high temperature durability and have a close end pad design, keeping electrical components, batteries and cables safe and free from moisture, and also prevents solder from leaking during installation.
  • high standard flared opening for easy wire insertion.The wire shrink wraps are all pre-cut into the most common sizes which improve your work efficiency..
  • 【Wide Applications:】These Copper Lugs works with Heat Shrink Tubing which are safe and reliable , greating for distribution box, golf carts, solar panels, marine,home applications,Vehicle,Motorcycle,DIY ....
Check Stock

Shrink Wrap Bags, 4x6 Inches Round End PVC Heat Shrink Wrap for Handmade Soap, Bath Bomb, Art Crafts and DIY Crafts, 200 Pcs

  • HIGH-QUALITY MATERIAL- These shrink bags 4x6 are made of high-quality PVC material, clear, nontoxic, tasteless, safe, environmental, healthy, and great thickness, not easy to tear, good performance. PVC shrink wrap bags can contact with food that can extend fresh time..
  • SIZE- These small shrink bags are 4x6 inches in size, totally have 200 pcs in the package. Perfect for the final protection when you make soap or candle, the bath bomb shrink wrap bags can protect your items away from moisture and damage, keep them fresh and safe..
  • WORK WELL- The heat shrink wrap bags are with the ability to shrink up 50% to any form, durable, reusable and easy to achieve effect. Safely packaged can keep the soap or bath bombs fresh, clean and also protect them from scratches, nicks, dents and damage to the product..
  • EASY TO USE- The round clear shrink wrap bags are easy to use, you just put the item into a shrink bag and then use a heat gun or hair dryer to heat it evenly until it is surrounded completely. The round end design can reduce folds that can shrink the product fit better, more exquisite appearance..
  • WIDELY USAGE- The heat seal shrink wrap bags are perfect for packaging soaps, bath bombs, candles, small gifts, presents, essential oil dropper bottles, makeup bot....
Check Stock

Deans Connector | Deans Plug | T Connector, Upgrade Version, 15 Female + 15 Males (15pair)

  • 【Work Smoothly】These deans plug work fine with each other, also can be used if you already have another brand deans plugs installed..
  • 【No Shrink Tube】 Protector cap does a good job than heat shrink, no need wrap around the wire, better in help keep the wires from shorting out..
  • 【Upgrade caps】They get rid of the need for using that tiny bit of heat shrink at the back and give you a little more surface to grab onto when disconnecting a battery..
  • 【Inexpensive】The cost is definitely a plus, inexpensive compared to some alternatives.If you have multiple RC cars or drones, that have the same size batteries with different connectors, you can switch the connectors to same deans connectors, you can save a lot of money..
  • 【15pair】The package included 15 female connectors and 15 male connectors, each connector has a protector cap..
Check Stock

2 Pcs 3/4 inch (Diameter) 3:1 Waterproof Heat Shrink Tubing Kit, Large Marine Dual Wall Adhesive Shrinkable Wire Wrap Tube, Insulation Sealing Cable Protector by YUKSY (4ft, Black & Red)

  • Good Tightness - Dual Wall Adhesive Heat Shrink Tube has the advantages of good electrical insulation, good sealing and high temperature resistance. After being shrunk, it's thick and stays stuck, the tube snug around the wire, or cable and also closes around the connector. And give you a tidy connection or electrical insulation..
  • Widely Use - Our heat shrink tubing are widely used in wire connection, rust prevention and corrosion protection of solder joints, protection and insulation processing of wire end, wiring harness and electronic components, and audio and electrical DIY. Fitness equipment parts and steel structure surface protection and so on..
  • Easy Use and Fast - You just use a heat gun heat it evenly until it wrap the wire or connector tightly. It is a 3:1 heat shrink ratio and will shrink to the original 1/3. (Temperature of your heat gun is up to 212℉, then glue inside will soften and seal the connection.).
  • Safe & ECO-Friendly - Our heat shrink tubing are UL certified, RoHS compliant, which ensures its safe and environmental protection. Protect you and your family..
  • Multiple Size - This is 2 pcs 4 feet long 3/4" in diameter large heat shrink tubing black and red (Note: it is 3/4" in round diameter, but not 3/4" in width). Other sizes also a....
Check Stock

1/2 inch (Diameter) 3:1 Waterproof Heat Shrink Tubing Kit, Large Marine Dual Wall Adhesive Shrinkable Wire Wrap Tube, Insulation Sealing Wear-Resistant Cable Protector by YUKSY (4ft, Black)

  • Good Tightness - Dual Wall Adhesive Heat Shrink Tube has the advantages of good electrical insulation, good sealing and high temperature resistance. After being shrunk, it's thick and stays stuck, the tube snug around the wire, or cable and also closes around the connector. And give you a tidy connection or electrical insulation..
  • Widely Use - Our heat shrink tubing are widely used in wire connection, rust prevention and corrosion protection of solder joints, protection and insulation processing of wire end, wiring harness and electronic components, and audio and electrical DIY. Fitness equipment parts and steel structure surface protection and so on..
  • Easy Use and Fast - You just use a heat gun heat it evenly until it wrap the wire or connector tightly. It is a 3:1 heat shrink ratio and will shrink to the original 1/3. (Temperature of your heat gun is up to 212℉, then glue inside will soften and seal the connection.).
  • Safe & ECO-Friendly - Our heat shrink tubing are UL certified, RoHS compliant, which ensures its safe and environmental protection. Protect you and your family..
  • Multiple Size - This is 4 feet long 1/2" in diameter large heat shrink tubing (Note: it is 1/2" in round diameter, but not 1/2" in width). Other sizes also available in our stor....
Check Stock

2 Pcs 1 inch (Diameter) 3:1 Waterproof Heat Shrink Tubing Kit, Large Marine Dual Wall Adhesive Shrinkable Wire Wrap Tube, Insulation Sealing Wear-Resistant Cable Protector by YUKSY (4ft, Black & Red)

  • Good Tightness - Dual Wall Adhesive Heat Shrink Tube has the advantages of good electrical insulation, good sealing and high temperature resistance. After being shrunk, it's thick and stays stuck, the tube snug around the wire, or cable and also closes around the connector. And give you a tidy connection or electrical insulation..
  • Widely Use - Our heat shrink tubing are widely used in wire connection, rust prevention and corrosion protection of solder joints, protection and insulation processing of wire end, wiring harness and electronic components, and audio and electrical DIY. Fitness equipment parts and steel structure surface protection and so on..
  • Easy Use and Fast - You just use a heat gun heat it evenly until it wrap the wire or connector tightly. It is a 3:1 heat shrink ratio and will shrink to the original 1/3. (Temperature of your heat gun is up to 212℉, then glue inside will soften and seal the connection.).
  • Safe & ECO-Friendly - Our heat shrink tubing are UL certified, RoHS compliant, which ensures its safe and environmental protection. Protect you and your family..
  • Multiple Size - This is 2 pcs 4 feet long 1" in diameter large heat shrink tubing black and red (Note: it is 1" in round diameter, but not 1" in width). Other sizes also availab....
Check Stock

Heat Shrink Tubing 2 1 Dia 2 Sleeving Wrap Cable Wire Electric Insulation Heat Shrinkable Tube Transparent 16Ft Dia 50mm

  • Round Diameter: 50mm / 2" (Before Shrinking), 25mm / 1" (After Shrinking).
  • Suitable for various electric insulation and bonding of cables and connectors and widely applied for connecting or end-handling, electric wire,....
  • Our Heat Shrink Tubes are with standard of RoHS, UL and CSA certified.
  • You can use hot air gun,lighter or air dryer to heat the Heat Shrink Tube.
  • Warranty & Friendly Customer Service - We have a commitment to every buyer 100% satisfaction. After all, we are customers, too, so if you have any....
Check Stock