ReviewsHeat Shrinkable Busbar Sleeves

Hotop 150 Pieces Solder Seal Wire Connector Heat Shrink Butt Waterproof Insulated Electrical Splice Terminals Automotive Marine for Boat Trailer (Red,22-18 AWG)

What will get: the package comes with 150 pieces of 22-18 AWG red heat shrink butt connectors with heat shrinkable, waterproof and conductive properties, which are sufficient to meet your various needs.
Insulated and waterproof: the electrical wire terminal comes with outer polyolefin tube and inner hot-melt ring, which can effectively improve waterproof performance, so it is very suitable for the automotive and marine industries.
Easy to use: you can just put 2 stripped wires into the solder sleeve and heat it with a hot air gun, and the insulating tube will shrink with a shrinkage ratio of 2:1 to form a waterproof seal, so as to complete the connection.
Practical design: these solder seal wire connectors are different from ordinary heat-shrinkable tubes, designed with solder ring and do not need crimping.
The solder seal terminals are transparent and can be accurately inspected when the wires are stripped and inserted inside.
Scope of usage: the insulated butt splices are useful tools to provide protection for wires, which are often applied in automobile, ship, marine, motorcycle and vehicles, and also applied for scientific wiring projects.

Check Stock

Blue Sea Systems 250 Amp MaxiBus BusBar with 6 studs 2126

250A MaxiBus BusBar with 6 studs (part number 2126).
Max voltage: 300V AC/ 48V DC, Continuous Rating: 250A AC/DC.
UL 94-V0 rated base material resists high heat, tin plated pure electrical copper for maximum conductivity and corrision resistance.

Check Stock

1 inch x 180 feet Black Heat Shrink Tape'Non Adhesive'

1" by 180 feet of Black (mate) Heat Shrink Tape.
None adhesive quick heat shrinkable tape.
Tape will shrink by applying 105c/220f heat or above.
Heat can be applied by regular and commercial heat blowers.
Suitable for broken wiring or where insulation is needed.

Check Stock

GLOSO E5 Stud Type Breaker Copper Busbar with Slots (12 Gangs)

E5 Stud Type Circuit Breakers' Mounting Copper Busbar - 12 Gangs, 1 Pack.
1 Piece of 12 Gangs Copper busbar with slots, made from heavy solid copper.
Make Easy to Connect Stud Type breakers in order to feed a number of protected circuit.
Busbars are 0.56" wide and 10.49" long, 0.05" thickness.

Check Stock

BougeRV 120W Lighter Portable Solar Panel Monocrystalline Foldable Waterproof Solar Panel Suitcase with Built-in Kickstand for Generator Power Station RV Camping Off-Grid with Protective case

【 9BB & 23.5% High Efficient】Mono solar panel of 9 busbar solar cells, shows stronger current collection ability which can provide high....
【Lighter & Portable】The volume and weight of foldable solar panels with suitcase design are smaller than the 5 busbar of the same spec, after....
【Durable & Waterproof】BougeRV foldable Solar panels with 9 busbar solar cells have much lower hot spot temperature which can bring lower annual....
【Simply & Stability】The solar panel is equipped with adjustable brackets, which can be easily placed on uneven ground such as grass and beach.This....
Compatibility & Package】BougeRV 120 watts solar panel is compatible with most solar power station systems and solar off-grid system（RV, Home,....

Check Stock

Pastall Non Insulated Butt Connectors Kit 200pcs 22-10 Gauge Uninsulated Butt Connector 22-18AWG, 16-14AWG, 12-10AWG, Electrical Wire Crimp Ferrule Terminals with 45pcs Heat Shrink Tube

Good non insulated butt connectors: Made by high quality red copper, has good electrical conductivity. with tin plated on the surface, better anti-oxidation and corrosion resistance performance..
High Performance Wire Ferrule Cable Crimp Terminal : These butt connectors easy to connect with electrical wire, Wire stop structure is nice to insertion wire in right space, and make sure the effect of compression..
Easy to use: Make the wire connection easier and stronger, no matter whether you use it in home circuits, car repairs, motorcycle repairs, etc., making the work easier and more efficient..
45pcs heat-shrinkable tubes: this connector kit has three sizes of connectors with 45pcs heat-shrinkable tubes..
Package Include: include 80pcs 22-18AWG, 60pcs 16-14AWG, 60pcs 12-10AWG total 200pcs Non-Insulated Butt Connectors packed in a plastic box, easy to store and carry..

Check Stock

4\ Ground/Power Distribution Terminal Block Battery Bus Bar Set [Max. 300V AC/48V DC] Negative/Positive Insulated Busbar for Auto Marine Car Trailer RV Boat - Black + Red

START WITH THE BEST - Every successful project starts with a solid foundation. These sturdy junction blocks feature a robust, tin-plated brass busbar, a flame-resistant base, and durable stainless steel hardware..
TRULY UNIVERSAL - Whether your working on a boat, a car or an RV, we've got you covered. Built to handle up to 300V AC, 48V DC, and 150A at 32V DC (4,800W), these power distribution blocks are ideally suited for all of your power needs..
YOU'RE COVERED - What's the first thing that always breaks on a busbar? The cover. They're usually thin, rigid, and brittle. Not these covers. Our covers are flexible, flame-resistant, and aren't held on by tiny, breakable clips or easy to lose nuts..
WORKS WITH YOU, NOT AGAINST YOU - Extra tall cover cutouts give you maximum flexibility with minimal effort. Use whatever gauge wire you need, route your wires from either side, double-stack wires if necessary, the covers will still fit..
SIMPLE - Sometimes "more options" just means more difficult. Our 6 terminal, 4-3/4? busbar gives you everything you need without overcrowding your system, or your patience..

Check Stock

(Red) 3/8' 4 Stud Power Distribution Block -BUSBAR- with Cover - Made in The USA

MADE IN THE USA – This Busbar Measures approximately 1 3/8” Wide x 1 7/8” Tall x 6 5/8” Long.
Nickel Plated Brass Contact Plate For Optimal Current Transfer And Weather Resistance. Glass-Filled Nylon Base For Superior Insulation And Strength.
Stainless Steel Hardware For Extreme Conditions Including Use In Marine Environments – Detachable Cover Included To Protect Connections. WE RECOMMEND A SMALL AMOUNT OF NICKEL ANTI SEIZE BE APPLIED TO THE THREADS TO PREVENT GALLING.
4 Stainless Steel 3/8″ Studs Making This Busbar Suitable For a Variety Of Applications.
Max Amperage: 250 amps @ 12 vdc, Max Volts: 48 vdc.

Check Stock

4 Ground/Power Distribution Terminal Block Battery Bus Bar Set [Max 300V AC/48V DC] Negative/Positive Insulated Busbar for Auto Marine Car Trailer RV Boat - Black/Red

START WITH THE BEST - Every successful project starts with a solid foundation. These sturdy junction blocks feature a robust, tin-plated brass busbar, a flame-resistant base, and durable stainless steel hardware..
TRULY UNIVERSAL - In order to work wherever you might need it, we designed each busbar to handle up to 300V AC, 48V DC, and 150A at 32V DC (4,800W). So whether your working on a boat, a car, or an RV, we've got you covered..
YOU'RE COVERED - What's the first thing that always breaks on a busbar? The cover. They're usually thin, rigid, and brittle. Not these covers. Our covers are flexible, flame-resistant, and aren't held on by tiny, breakable clips or easy to lose nuts..
WORKS WITH YOU, NOT AGAINST YOU - Extra tall cover cutouts give you maximum flexibility with minimal effort. Use whatever gauge wire you need, route your wires from either side, double-stack wires if necessary, the covers will still fit..
SIMPLE - Sometimes "more options" just means more difficult. Our power and ground 12 terminals, 4-1/2? distribution block gives you everything you need without overcrowding your system, or your patience..

Check Stock

(Red & Black) 3/8' 4 Stud Power Distribution Block -BUSBAR- with Cover - Made in The USA

MADE IN THE USA - This Busbar Measures approximately 1 3/8” Wide x 1 7/8” Tall x 6 5/8” Long.
Nickel Plated Brass Contact Plate For Optimal Current Transfer And Weather Resistance. Glass-Filled Nylon Base For Superior Insulation And Strength.
Stainless Steel Hardware For Extreme Conditions Including Use In Marine Environments - Detachable Cover Included To Protect Connections. WE RECOMMEND A SMALL AMOUNT OF NICKEL ANTI SEIZE BE APPLIED TO THE THREADS TO PREVENT GALLING.
4 Stainless Steel 3/8" Studs Per Block Making This Busbar Suitable For a Variety Of Applications.
Max Amperage: 250 amps @ 12 vdc, Max Volts: 48 vdc.

Check Stock

Lot 200pcs Heat Shrink Links Ring Glue Lined Tubes For Hair Extensions 6mm

Shrinkable tube is used to connect with I-tip hair extensions.
Glue lined for a tighter,stronger and longer lasting bond.
Applied to hair using a fusion heat connector/shrinks around extension once heat is applied..

Check Stock