ReviewsHeat Shrinkage Tape

200pcs 18650 Battery PVC Heat Shrink Wrap Tube (30mm) and 200pcs 18650 Battery Insulator Ring for 18650 Batterie Insulation Protection

Material: PVC Heat Shrinkable and Highland Barley Paper.
Size: PVC Heat Shrink Tube: Wide 30mm(1.18in) , Length 72mm(2.83in) , Thick 0.08mm.
Insulating Ring: Diameter 18mm, Inner Diameter 10mm Thick 0.2mm.
Shrinkage Rate: 48% (cross-section), 5% (longitudinal).
Advantages: Insulation Protection, Fast Shrinkage, Multiple Applications.
Application: Used for 18650 Lithium Battery DIY, Battery Refurbishment, and Enhanced Electrical Insulation..

Check Stock

530Pcs 18650 Insulator Ring and 500Pcs (29.5mm10 Colors)18650 FlatFire Retardant PVC Battery Wrap Heat Shrink Tube for 18650 Batterie

1. High quality PVC heat shrinkable tube of battery has excellent environmental protection, heat insulation, stable performance and rapid shrinkage. 5 mm, shrinkage temperature: 80 ℃, shrinkage rate: ≥ 48 ± 5%.
2、 Length 72.5MM/2.85inch and width29.5MM/1.16in Round diameter: Φ18.7mm/0.74in 500个 PVC heat shrinkable tubes in 10 different colors, 50 in each color. Note: please put the product in a cool and dry place to avoid deformation caused by high temperature.
3.Good insulation,corrosion resistance,tear resistance and wear resistance it have waterproof function.
4.Safe and stable,better protection to avoid battery shorts,easy to peel and paste.
5.Insulating ring Outer ring diameter: Φ18mm. Inner ring diameter: Φ10mm the thickness is 0.18MM.

Check Stock

HTVRONT Heat Tape for Sublimation, 4 Rolls 10mm x33m 108ft Heat Resistant Tape for Heat Press, Heat Transfer Tape Thermal Tape for Electronics & Heat Vinyl Press Tape No Residue(Blue)

【High-Temperature Resistant Tape】Used our heat tape with your mug press, heat press vinyl project and sublimation without worrying that it will melt. Heat resistant tape is a polyester film tape with a high-temperature resistant adhesive. Our heat tape for sublimation is compatible with high temperature up to 300℃(572℉). The heat transfer tape work well in protecting product surface in painting, soldering, ironing etc..
【PEEL OFF EASILY & NO RESIDUE】Our heat transfer tape is easy to stick and peel off, which offers excellent resistance to no residue after peeling off. Even uneven surfaces can be easily wrapped with heat resistant tape and don't have to clean the glue off your belongings after using heat tape. So you can easily and conveniently use HTVRONT high temp tape..
【EXCELLENT ADHESION & HIGH INSULATION】Unlike other heat tape for sublimation with odour and cracking, our heat press tape is pretty sticky, the strong silicone adhesive will hold on tightly to any surface. Our high resistant tape are also high insulation, acid and alkali-resistance, low electrolysis, mechanically sound, crocking resistance. The heat tape can well protec....

Check Stock

IPG Fiberglass Mesh Drywall Joint Tape, Seams Real Easy, 1.9\ x 300 ft, (Single Roll)

Fiberglass Mesh Tape designed for seaming drywall joints.
Eliminates shrinkage, tears and bubbles common with paper joint tape.
For repairing cracks, patching holes and mending seams common in plaster and drywall installation.

Check Stock

Heat Tape for Heat Press, 6 Packs Selizo Heat Transfer Tape Heat Resistant High Temperature Tape for Sublimation on Coffee Mugs, HTV Craft on T-Shirt Fabrics

High Temp Tape - Selizo heat tape is compatible in a wide temperature range of up to 280°C (536°F), with the ability to maintain its unique combination of mechanical properties under the harshest of conditions, the high heat tape is great for applications where extremes of heat and vibration.
EXCELLENT ADHESION - The heat transfer tape made from polyimide film with silicone adhesive, it is easy to stick and not easy to break while peeling. Works well in coffee mug press, Heat press, T shirt application or other Thermal transfer printing.
LEAVES NO RESIDUES – Our heat resistant tape for heat press offers excellent resistance to no residue after peeling off. Even uneven surfaces can be easily wrapped with heat resistant craft tape.
APPROPRIATE SIZE - The heat resistant tape is 2/5 inches in width and 108 ft in length per roll. Not too wide nor too narrow. Long enough heat press tape can meet daily needs in different situations, such as keep your design in place when you making shirts and hats heat resist tape.
WIDELY USE - Heat tape for heat press is not only suitable for sublimation on coffee cups, but also ideal for heat transfer vinyl on T-shirts, pillows, clothing, fabrics. Great craft heat tape for all kinds of DIY projects.

Check Stock

HTVRONT Heat Tape - 10mm X 33m Heat Resistant Tape 2 Rolls Heat Transfer Tape, No Residue Heat Sublimation Tape, Heat Tape for Sublimation, Heat Press, HTV Clear Heat Tape

【High Temperature Resistance】Clear heat resistant tape is made of is made of high-quality PET material. Heat resistant tape can be suitable with high temperatures in a wide range of -30°C (-22°F) to 200°C (392°F). For short periods, this heat tape can abide temperature of 250℃(482°F) and temperature of 220℃(428°F) for long periods. Heat transfer tape is very good at protecting surfaces of products during welding, ironing, etc..
【Easy to Remove & No Residue】HTVRONT Heat tape 10mm is easy to stick and peel off, and leaves no trace after tearing. Heat sublimation tape length in 33m /108ft, width in 10mm/0.39in, high temperature tape will not leave residue or smell on the sublimated finished product..
【Great Adhesion】Our 2 rolls of heat vinyl press tape combine strong adhesion so that they can adhere to many kinds of surfaces repeatedly. This sublimation tape works to fix materials firmly in the right places and offers crafters a soothing working experience even with rough objects. Therefore, HTVRONT heat press tape for sublimation is a good companion for crafts!.
【Excellent Performances】Our heat t....

Check Stock

High Temperature Tape Heat Tape Heat Resistant Tape Heat Transfer Tape Heat Tape for Sublimation No Residue 10mm X 33m 108ft (Yellow-2 Roll)

Heat Tape perfect for protecting sensitive printed circuit board (PCB) components such as gold fingers when wave soldering.
Heat Resistant Tape extensive use as heat tape for transformer, motor, coil, capacitor and frequency conversion power supply in electronic industry.
Heat transfer tape for vinyl.This heat transfer tape keep your design in place when you making shirts and hats,help to do heat transfer vinyl on a heat press.
High Temp Tape Size: Width: about 10mm/0.39in.
Length: about 33m /108ft. Heat resistance: Short period Heat Resistance:260℃（500°F）Long period Heat Resistance:220℃（428°F）.
Heat Tape Color: mainly tawny,No residue.

Check Stock

8 Rolls Heat Tape for Sublimation with Heat Resistant Gloves Transfer Tape Sublimation Tape Heat Resistant Tape Thermal Tape Heat Press Tape High Temp Tape, 5 Sizes 108ft for Each Roll

【Leave No Marks and Sticky Residue】The heat tape for sublimation is heat resistant and would not leave any marks and stains, which keeps the products in place and prevents ghosting. The transfer tape is silicone adhesive for easy release with no sticky residue after peeling off. Also the sublimation tape is much easier than the thinner tapes as it doesn't curl up when cut. The transparent heat resistant tape will not leave other color residue, which was featured by our heat tapes..
【High Temperature Resistance】The heat resistant tape can withstand high temperatures up to 428 degrees Fahrenheit(220 degrees Celsius). Our transfer tape can work for a long time at 356 degrees Fahrenheit(180 degrees Celsius) that won't melt. The sublimation tape sticks really well and holds up under heat, never leaves any glue behind on any material. The heat resistant gloves can withstand high temperatures up to 302 degrees Fahrenheit(150 degrees Celsius)..
【Reliable Material】The heat resistant tape is made of polymide film, with a silicone adhesive. The transfer tape adheres very well which is heat resistant, strong and stays put and very abrasion resistant.
The heat resistant gloves(color shipped randomly) are are made of quality polyester and silicone materi....

Check Stock

Flame Resistant FR High Visibility Hi Vis Coverall - 88% C/12% N (Medium, Khaki)

... complies with ASTM F1506 for Arc Flash and NFPA 2112 (ASTM F1930) for Flash Fire. Arc Flash rating (ATPV) is 12 cal / cm2 and complies to HRC 2 rating. Garment is NFPA 2112 / HRC 2 compliant and UL CERTIFIED. 2” FR reflective tape is ANSI / ISEA 107 compliant. Fabric is mercerized and designed to provide minimal shrinkage, maximum comfort and optimum safety and durability..
DESIGN & SIZING: Full sleeve. Heavy duty 2 way YKK Brass FR zipper. Action back pleats. 2” High Visibility FR Reflective tape (ANSI / ISEA 107) Pockets: 2 breast pockets, with flaps and snap closure. 2 quarter cut swing front pockets. 2 patch hip pockets. Utility pocket on right thigh. Pen / cell phone pocket on left arm. Side vents. Pen slot on left breast pocket. Elastic on sides for better fit. One 4” hammer loop. Manufactured to US Standard Size Charts. Refer to Size Chart Image..
COMPLIANCE: NFPA 2112 (ASTM F 1930) Compliant for Flash Fire. ASTM F1506 (D6413 + F1959) Compliant for Arc Flash. HRC 2 (ATPV of 12 cal / cm2). ANSI / ISEA 107 Class 3 Compliant UL Certified (check labels for UL Stamp). All our NFPA 2112 / HRC 2 garments are identified by 3 point labeling system..

Check Stock

Flame Resistant FR High Visibility Hi Vis Coverall - 88% C/12% N (Medium, Navy Blue)

...with ASTM F1506 for Arc Flash and NFPA 2112 (ASTM F1930) for Flash Fire. Minimum Arc Flash rating (ATPV) is 8 cal / cm sq. and complies to HRC 2 rating. Garment is NFPA 2112 / HRC 2 compliant and UL CERTIFIED. 2” FR reflective tape is ANSI / ISEA 107 compliant. Fabric is mercerized and designed to provide minimal shrinkage, maximum comfort and optimum safety and durability..
DESIGN & SIZING: Full sleeve. Heavy duty 2 way Brass FR zipper. Action back pleats. 2” High Visibility FR Reflective tape (ANSI / ISEA 107) Pockets: 2 breast pockets, with flaps and snap closure. 2 quarter cut swing front pockets. 2 patch hip pockets. Utility pocket on right thigh. Pen / cell phone pocket on left arm. Side vents. Pen slot on left breast pocket. Elastic on sides for better fit. One 4” hammer loop. Manufactured to US Standard Size Charts. Refer to Size Chart Image..
COMPLIANCE: NFPA 2112 (ASTM F 1930) Compliant for Flash Fire. ASTM F1506 (D6413 + F1959) Compliant for Arc Flash. HRC 2 (ATPV of 8.0 cal / cm sq or above). ANSI / ISEA 107 Class 3 Compliant UL Certified (check labels for UL Stamp). All our NFPA 2112 / HRC 2 garments are identified by 3 point labeling system..
WASH / CARE INSTRUCTIONS. FR cotton based fabrics must be well cared to extend life and mini....

Check Stock

MEBMIK 2 Rolls 20mm x33m(108ft) Blue Heat Tape High Temperature Heat Resistant Tape Heat Transfer Tape for Heat Sublimation Press Vinyl,No Residue

Blue Heat transfer tape is a polyester film tape with a high temperature resistant adhesive..
Blue Heat resistant tape comes off clean,easy peal and no residue.This heat tape is widely used in industrial and scientific..
It's a blue heat sublimation tape for heat press,it's really indispensable when sublimating and the tape can do the job very well..
Length: 33m /108ft. Heat resistance: 250°C.Color: Blue..
You will receive a package containing 2 rolls blue heat press tape.This tape is suitable for Industrial & Scientific..

Check Stock