ReviewsHeat treated Tap Set

YDLQWCZ Combination Drill Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6 Screw Tap Bit 1/4 Inch Hex Shank HSS Spiral Flute Tapping Tool Set Kit Deburr Countersink Bit

  • ...n the storage box, so you can choose the exact drill bit effortlessly. The 1/4" (6.35mm) hexagonal shank has a tapered end to prevent excessive knocking.The back taper exceeds the tap to prevent over-drilling and thread damage..
  • High Speed Steel 4341 Material - The surface of the titanium alloy combined drill bit is treated with titanium alloy, which effectively improves the cutting performance of the drill bit, is more wear-resistant, and prolongs the service life. Made of high-speed steel 4341, to ensure sharpness, speed, and maintain strength and efficiency..
  • Improve Efficiency - Drilling, tapping, deburring, and countersinking can complete the processing of copper, brass, aluminum, sheet metal, low carbon steel, and plastic at one time, improving work efficiency. Deepening the chip flute helps to remove the chips and debris on the tap, reducing friction and heat, so as to achieve a faster and colder drilling process..
  • Easy to Carry - This drill tap bits set is equipped with a storage box, which is convenient to carry and helps to keep the drill bit tidy..
Check Stock

BOSCH BDT516F18 5/16-18 Plug Tap and Size F Drill Bit Combo Set

  • Tap and drill bit combo – provides a secure method of drilling the proper hole size before cutting right-hand internal threads.
  • Plug taps – engineered for cutting right-hand internal threads.
  • Included drill bit – is matched to tap for correct size, with a no-skate tip for accurate hole starts.
  • Heat-treated carbon steel tap – provides superior durability and speed.
  • Rolled tap threads – deliver more accuracy and are cleaner than machined threads.
Check Stock

Big Gator Tools SDGMINI MINI V-DrillGuide®

  • 21 Drill Sizes: #10, 21, 25, 29, 30, 1/8, 33, 7/64, 36, 37, 38, 40, 3/32, 43, 45, 47, 5/64, 50, 1/16, 53, 3/64"..
  • Covers all tap drill sizes for tap sizes: 10-32 down to 0-80..
  • The portable V-Drill Guide ensures straight and accurate hand drilled holes on flat surfaces, corners and round parts!.
  • Heat treated for durability. Side alignment marks allow accurate hole locating..
Check Stock

3/4-20 HSS Tap And Die Set, UNEF Machine Thread Tap And UNEF Round Thread Die Right Hand

  • Size : 3/4"-20 thread tap and thread round die , Pitch:20 , Material : HSS..
  • Tap : Chip removal, high efficiency, debris rapidly discharged in the tank. No blocking, fast efficiency..
  • Round Die: Not easily broken tooth chip fast, abrasion resistance and long service life..
  • HSS tap offers precision cut threads, accurately formed for consistent, exact threading..
  • Advantage : Heat treated and tempered for file hard threads and a long, useful life..
Check Stock

5/8-18 Tap And Die Set,UNF Right Hand Machine Tap and Round Die

  • Round Die: Not easily broken tooth chip fast, abrasion resistance and long service life..
  • Tap : debris rapidly discharged in the tank. No blocking, fast efficiency..
  • Characteristics : Heat treated and tempered for file hard threads and a long, useful life.
  • You will Get : 1x 5/8-18 TAP & 1x 5/8-18 DIE.
Check Stock

Big Gator Tools V Tap and V Drill Guides - Complete tool set of 6 Guides

  • Automatically squares up the tap or drill with the surface..
  • V-groove along the bottom of the guides allows for perpendicular alignment on round parts or corners.
  • Natural steel finish, non-plated, Portable, pocket-sized. Lifetime Manufacture Warranty.
  • Made from special nickel alloyed steel that is heat treated for durability.
  • 100% Made in the USA. Eliminates most tap breakage due to improper alignment!.
Check Stock

Aceteel 1/2\-28 UNEF HSS Tap And Die Set, 1/2 x 28 UNEF Machine Thread Tap And Round Thread Die Right Hand

  • When your worn-out screws are rusty and can no longer match your machine, this set can help you easily eliminate the flaws on the threads.
  • Fine craftsmanship: the polished thread tap kit is made with advanced technology and craftsmanship, which can fit nicely with screws.
  • In addition, after being treated with a corrosion-resistant satin finish, the thread cutting friction is smaller and the surface becomes stainless steel, making it to be more bright and textured.
  • Size information: the package comes with 9 x metric taps and 9 x metric dies in different specifications, namely, M3 (0.5 mm)/ M4 (0.7 mm)/ M5 (0.8 mm)/ M6 (1 mm)/ M7 (1 mm)/ M8 (1.25 mm)/ M9 (1.25 mm)/ M10 (1.5 mm)/ M12 (1.75 mm).
  • Adjustable tap wrench handle measures about 19.5 cm/ 7-11/16 inch long, suitable for M3 to M12 (1/16 to 1/2 inch), and the die wrench handle is about 20 cm/ 7-7/8 inch long, suitable for M25 (1 inch).
  • Suitable for beginners and skilled people: this tooth opener kit is the nice assistant for craftsmen no matter if you are a novice or a skilled worker, which is very suitable for cleaning low-carbon steel or aluminum products in construction, automobile maintenance and factories, largely improving work efficiency and having strong practicabilit....
Check Stock

Drill America - DWTTW7 1/4'-1 1/8' (1/4' - 1' Shanks) Adjustable Tap Wrench, DWT Series

  • HOLDS SMALLER TOOLS: Starrett 93 series T-handle tap wrench is for holding taps, drills, reamers, and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use..
  • CENTERED BODY: The body is centered, enabling the worker to use it on lathe centers or on an upright drilling machine to start the tap straight..
  • RIGID HOLD: The T handle’s jaws conform to the tool that’s being held, making it extra rigid and less apt to loosen its tight grip..
  • SLIDING HANDLE: Tap wrench has a sliding handle that is frictionally held, and it can be removed entirely or positioned so that leverage can be applied when working in close quarters..
  • FOR SQUARE SHANKS: It’s designed to hold square shanks. Round shanks can also be gripped, but extra care must be used. Excessive tightening may break the binding nut..
Check Stock

AUTOTOOLHOME 6 Pack Titanium Combination Drill Tap Bit Set Screw Tapping SAE 6-32NC 8-32NC 10-24NC 10-32NC 12-24NC 1/4-20NC

  • Titanium Combination Drill taps are made of HSS 4341, which can ensure sharp, fast execution and retain strength and efficiency. The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life..
  • Three in one operation provides hole drilling, tapping, deburring and countersinking for a quick and complete job on copper, brass, aluminum, sheet metal and plastic.
  • This tap set includes SAE , so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. The convenient ¼-inch (6.35mm) quick change hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • 6pcs drill tap set including SAE- 6-32nc, 8-32nc, 10-24nc, 10-32nc, 12-24nc, 1/4-20nc.
  • Storage case is lightweight and durable for easy storage and is portable for all job environments.
Check Stock

60-Pc Master Tap and Die Set - Include SAE Inch Size #4 to 1/2” and Metric Size M3 to M12 Coarse and Fine Threads | Essential Threading Rethreading Tool Kit with Complete Accessories and Storage Case

  • ▲ PREMIUM MATERIAL AND DURABILITY - Industrial grade GCr15 bearing steel construction ensures durability and tool longevity to withstand professional uses.
  • ▲ EXCELLENT CUTTING PERFORMANCE - All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance.
  • ▲ VERSATILITY AND TAPERED TEETH DESIGN - Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel.
  • Taps (for internal threads) and Dies (for external threads) feature with tapered teeth that start threading more easily.
  • ▲ MOST POPULAR SIZES - Set includes (20) Metric taps and dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75.
  • (20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12-24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
  • (12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
  • ▲ COMPREHENSIVE ACCESSORIES - Comes with (1) Adjustable Tap Handle.
Check Stock

NORTOOLS Drill Tap HSS Combination Drill and Tap Set with 1/4 Inch Quick Change Adapter,6-32 to 1/4-20 Screw Tapping bit Tool

  • ✅【High-quality materials】SNUSIM combination drill tap bit is made of high quality High-Speed Steel 4341 and steel 6542. Strong hardness and good durability.The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life..
  • ✅【Standard sizes】6Pcs Combination Drill and Tap Bit, Inculued 6-32NC (3.5mm), 8-32NC (4.2mm), 10-32NC (5mm), 10-24NC (5mm), 12-24NC (5.7mm), 1/4-20NC (6.35mm), to meet your diversified requirements..
  • ✅【Applicability】Drill tap bits set suitable for drilling tapping cutting on light metal aluminum board iron etc. Deburr/countersink also provided on bit beyond back taper. 4341 material is suitable for wood, aluminum, iron and other materials with lower hardness. The 6542 material has high hardness and is more durable, and can be applied to steel plates, even thinner 304 stainless steel plates of about 2mm..
  • ✅【High efficiency】 Complete hole drilling, tapping, durable and countersinking in one operation and greatly save processing steps and time costs, improve working efficiency. Recommended for use it on a tapping machine. Pay attention to the operation method when using the electric drill. Excessive shaking and tilting w....
Check Stock