ReviewsHeating Ventilation

80W Adjustable Soldering Iron kit, Upgraded LCD Display Soldering Gun, Welding Tool with ON/OFF Switch, Fast Heating Ceramic Thermostat Design

【High performance material】The soldering iron tip made of high quality material can be well supported and not easy to fall off, meet all the requirements of your soldering project..
【High quality ceramic fast-heating original】 SREMTCH soldering kit with high sensitivity internal heating ceramic induction technology, twice as fast as traditional soldering iron heats from 200°C to 450°C. Higher safety and longer life..
【LCD Display】The high-definition LCD display can show the precise temperature of the soldering gun kit. According to your needs, the temperature is easily adjusted by the temperature adjustment knob, simple and efficient operation..
【Fast Cooling and Safety】Four ventilation holes on the soldering head and four ventilation holes on the tube ensure faster and better heat dissipation than other soldering irons. The rubber handle cover on the soldering iron provides better heat insulation and safety protection..
【Wide range of applications】The soldering iron tool is a good choice for soldering circuit boards, appliance repair, home DIY enthusiasts, jewelry soldering, whether you are an electronics enthusiast or a beginner learning electronic engineering, you can easily use it..

Check Stock

Temperature Humidity Controller,diymore SHT2000 Thermostat AC 110V-230V 10A Digital LED Display Multifunction Thermometer Hygrometer

【Overview:】Diymore SHT2000 AC 110~230V10A temperature and humidity controller, just make your life more convenient..
【Heating Mode:】Start value 003c stop value (program automatically determines working mode is heating/humidifying mode). For example, controlling the water heater, heat to 65℃ to stop, the temperature drops back to 50℃and start heating again.
【Cooling Mode:】Start value 003e stop value (the program automatically determines the working mode is cooling/dehumidifying mode). For example, using in the farm, the fan is ventilated to 26℃to stop, the temperature is raised to 30℃ and the ventilation is started again.
【Humidifying Mode:】Start value 003c stop value (program automatically determines working mode is heating/humidifying mode). For example, fresh supermarket humidification, control humidifier 50% RH began to humidify, humidified to 80% RH to stop humidification.
【Dehumidifying Mode:】Start value 003e stop value (the program automatically determines the working mode is cooling/dehumidifying mode). For example, workshop control exhaust dehumidification system, humidity 70% RH starts dehumidification, humidity 40% RH stops dehumidification.

Check Stock

Touch Screen Programmable Thermostat Wireless Smart Digital Thermostat Cooling and Heating Temperature Controller for Central Air Conditioner Fan Coil Units

Fan coil units thermostat is used for control room temperature in central air conditioning fan coil units system..
Large LCD display with backlight, easy to read. LCD display mode: working mode (cooling, heating, ventilation), fan speed (high, middle, low, auto), room temperature, setting temperature, time, 7 days 4 period programming, timing turn on/off, etc..
Suitable for both 2 pipes (heating/cooling) and 4 pipes (heating and cooling) system..
By comparing room temperature with setting temperature to open and close fan coil units and motorized valve in the end of air conditioning system, to achieve purpose of adjusting room temperature, comfort and saving energy..

Check Stock

Car Seat Cushion Summer Cooling Pad Seat Ventilation Seat Cushion Breathable Air-Conditioning Car with Summer Refrigeration Ice Pad Constant Temperature (Color : Black)

One-piece PE support deflector, with rounded contacts and smooth ventilation performance, the cooling and heating flow is more evenly distributed..
Wear-resistant and breathable bottom fabric, non-slip silicone lattice cushion, can firmly fit the original car seat and effectively prevent sudden brake slippage..
The cushion material is made of high-quality imported skin-friendly PU leather, compounded with multi-layer sponge and reinforced base cloth, and matched with precise perforated dot matrix, which is comfortable to touch, breathable and soft..
The special structure of the inner lining composite 3D three-dimensional mesh gives inherent breathability and high elasticity, making it more comfortable to use..
Continuously output air-conditioning cold and heating, realizing rapid cooling and heating without secondary cooling and heating, which is more energy-efficient and efficient..

Check Stock

RKI 4" - Professional Backdraft Damper Inline Spring Loaded for Dryer Duct

Back draft damper for insertion into 4 inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct.
A tight sealing and fastening of the duct is achieved by the rubber strip attached to the outside of the draft blocker damper. The rubber seal prevents loud rattling when the flap blades open and close. The housing of the flap is made of galvanized steel, the flap blades are made of aluminum, the axle and spring are made of stainless steel.
Designed for use in AC, dryers, exhaust, extractor or range hoods, heating systems, vents and other residential, commercial and industrial HVAC applications.
FUNCTIONALITY: Duct draft stopper prevent cold air or wind from entering the ventilation pipe. In this case, the flap is installed in such a way that the flap leaves only open into the outgoing air direction. This means that no (cold) air / wind can penetrate the ventilation pipe from the outside..

Check Stock

Vent Systems 8 Inch Backdraft Damper - Backflow Shutter - Heavy-Duty Inline Springs Loaded - One-Way Airflow Ducting Insert - Inline Fan Vent Deflector

Back draft damper for insertion into 8 inch ventilation ducts. The backflow damper opens and closes automatically. It has a strong spring and can be....
A tight sealing and fastening of the duct is achieved by the rubber strip attached to the inside of the draft blocker damper. The rubber seal prevents....
Designed for use in AC, dryer vent, exhaust, extractor or range hoods, heating systems, fans, vents and other residential, commercial and industrial....
Duct draft stopper prevent cold air or wind from entering the ventilation pipe. In this case, the flap is installed in such a way that the flap leaves....
The backflow Preventer valve is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be....

Check Stock

iPower 6 Inch 240 CFM Inline Duct Vent Blower Booster Fan with 16 Feet Non-Insulated Flex Air Aluminum Ducting Dryer Vent Hose and Variable Speed Adjuster for HVAC Ventilation

Portable booster fan: lightweight and can be installed anywhere. Superior balanced blades for long service life & quiet operation.
Durable and flexible: Flexible ventilation ducting made from high-quality flame-retardant aluminum and built-in corrosion-resistant wire helix,....
Accurate speed adjuster: iPower fan speed controller will correctly and precisely adjust the speed of your duct and inline fans.
Widely used: help boost airflow in HVAC (Heating, Ventilation and air conditioning) units and remove exhaust ventilation from grow rooms, kitchens,....
Package includes: 1*6-inch booster fan, 1*air aluminum ducting, 1*variable speed adjuster.

Check Stock

Draft Blocker 4 Inch - Backdraft Damper - Draft Stopper - Backflow Preventer - Vent Deflector (4'' Inch)

Back draft damper is made for insertion into inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct.
Damper has 2 valves, designed for use in air conditioners (AC), dryers, exhaust, extractor or range hoods, heating ducts, vents and other HVAC applications.
INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction..
The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from rattling and can be installed horizontally or vertically.
Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ....

Check Stock

Solary Magnetic Induction Heater Kit 1000W 110V For Automotive Flameless Heat Induction Heat 1KW Hand Tool

【FLAMELESS HEATING】 - Mini Ductor Magnetic Induction adopts high frequency magnetic fields.The induction heating has an excellent performance. Metal can be heated with high-frequency magnetic fields and ONLY through induction heat..
【LED INDICATOR】 - LED light at the end Illumination.The LED light at the end of the clamp position illuminates the work area even when you are working in the dark..
【ERGONOMIC HANDLE】 - Completely hand-held, ergonomic, grenade style grip,ventilation at the other end of the mini-duct opposite the LED light. Ergonomic handle for better handling..
【PORTABLE BAG】 - The scope of delivery includes a carrying bag for the entire induction heating kit, which makes it easy to store and carry.Gross weight: 3.3kg.
Packaging dimensions (L x W x H): 45 x28 x 13 cm..
【WIDE APPLICATION】 - Suit for loosening stuck parts, bearings, gears, pulleys, wheel nuts, in-line applications, fuel tank belts, PDR applications (paint-free dent repair) etc..

Check Stock

iPower 6 Inch 8 Feet Non-Insulated Flex Air Aluminum Ducting Dryer Vent Hose with 4 Stainless Steel Clamps for HVAC Ventilation, Silver

Duct fan connector: It's compatible with 6 inch diameter dryers/fans. Is primarily used with duct fan systems in various air circulation and ventilation projects to transport air. Increasing airflow and reducing space usage.
Flexible installation: The length and shape are flexible to change for exhaust fan blower or inline fan.
With 4 stainless steel duct clamps in the same duct opening size for ensuring a seamless junction.
Fire proof coating: Flexible ventilation ductings made from high-quality flame-retardant aluminum and built-in corrosion-resistant wire helix for reinforcement and lasting performance.
Wide applications: Perfect for hydroponic planting rooms and grow tents, bathrooms and lofts, heating and cooling transportation or other devices. Also can be used to cool closets, racks and cabinets.
Package includes: 6 inch ventilation ducting.
2 pairs 6 inch stainless steel clamps. Note: Temperature endurance range from 0 - 185°F (-18℃ - 85℃).

Check Stock

Broan 162 Type IC Infrared Single-Bulb Ceiling Heater, 250-Watt

Heat and ventilation functions may be controlled separately or in combination so you’re always in control of the environment.
70 CFM fan provides excellent ventilation at a quiet 3.5 Sones and will keep your bath free from steam or bathroom odors.
Use 250W BR40-size infrared bulbs (not included) for comfortable heating performance.
Quiet, highly efficient polymeric blower wheels maintain consistent power, while polymeric dampers prevent backdrafts and eliminate mechanical noise for reliable operation and a comfortable environment. UL listed for safety..
Sturdy steel housing, a plug-in, permanently lubricated motor, adjustable mounting brackets with keyhole slots and a 4” round duct connector with tapered sleeves combine to make installation logical and simple.

Check Stock