ReviewsHeavy Bending Equipment

Southwire 2547SWUSA1E 25-Foot Contractor Grade 12/3 with Lighted End American Made SJTW Extension Cord, a Wounded Warrior Project Product

  • PROUD PARTNER of the Wounded Warrior Project - Support Warriors.
  • MADE IN AMERICA: Display AMERICA’S COLORS on the jobsite with this patriotic striped contractor grade extension cord.
  • ALL PURPOSE EXTENSION CORD rated for -40F to 140F (-40C to 60C) Indoor and Outdoor use, suitable for jobsites, workshops, warehouses, and more.
  • WATER RESISTANT: Flexible SJTW vinyl jacket provides protection of the cord against moisture, abrasion, and sunlight.
  • HEAVY DUTY 25 foot all-copper wire extension cord recommended for use with heavy duty equipment and tools.
  • EXTRA DURABLE oversized, clear molded plug prevent accidental bending or breaking and UL listed for your safety.
Check Stock

Shelf Pole Hooks 5-Pack | Chrome Multi-Use C-Hook | Best Solution for Garage Shelving Storage Organization | Use with Metal or Wire Shelves and Racks | Heavy Duty, Easy Installation

  • ...ieces heavy duty large S hooks, sturdy and sufficient, can be applied for many years without deformation, adequate quantity is enough to meet your daily life needs and replacement.
  • Wide range of application: S hooks hanger is applicable for both indoors and outdoors usage, fitting for hanging cycles, ladders, sports equipment and so on.
  • At the same time, it is also a nice outdoor fence hanger for swimming pool equipment, plant supports.
  • Please measure the size before purchasing.
  • Good load-bearing capacity: the maximum load bearing capacity of the heavy duty S hooks is about 50 pounds, which is stronger than any other small and light S-shaped hooks.
  • The tail end of the hook is approximately 2.4 inches in coating, easily protecting valuable equipment and reducing wear. Please do not exceed the specified weight.
  • Sturdy and stubborn: S hooks hanger for kitchen is made of quality galvanized steel, reliable and not easy to break, and the load-bearing capacity is strong, ensuring its sturdy quality.
  • You can use it for many years without bending or deforming.
  • Save time and energy: you only need to hang S shape hook wherever you want without any other operations.
  • You can use it without racking your brains to install or drill, mo....
Check Stock

Portable Soccer Goals Backyard 12x6,Upgradation Soccer Goal Frame Soccer Net with Carry Bag Indoor Outdoor - Practice Nets- 12PCS Practise Soccer Con (12 * 6)

  • ...ight-strand multi-dragon knot netless and heavy metal round and glass fiber tubes.
  • The telescopic bending base is used for stability on rough ground, and the U-shaped ground nail is used for stability. 4-inch mesh size, the ball is not easy to fly out.
  • Have soccer training equipment: 1 football net and frame, 4 U-shaped floor studs, 12 practice logo discs, and 1 stylish and strong portable zip storage bag. It is packed in a carrying bag for long-term storage and transportation, and can be used on almost any vehicle. It can be used not only outdoors, but also in parks, homes, courts or beaches..
  • Clever design: Many buyers react that the base is bent because it is designed to be bent. Only by bending the base can the entire football gate be upright after assembly. We straighten the base through the upright glass fiber and football net on both sides. After receiving the goods, you can try to assemble them. After assembly, you think this is a very interesting football gate!.
Check Stock

Blue Jay ‘Stop Your Bending’ 4 Piece Hip Kit - Mobility Aid Kit with 26 in. Reacher, Sock Aid with Foam Handles, Dressing Stick, 24 in. Metal Shoehorn. Hip Replacement Recovery Kit

  • Kit Content: Hip recovery kit consists of long-handled reacher, sock aid, dressing stick, and metal shoehorn, assisting people with disability, limited mobility or back/knee injury.
  • Mobility Assistance: The grabber reacher included in this kit allows the user to grab things paced at a distance, alleviating stress and pain on the back.
  • Convenient Dressing: This medical mobility kit comprises of a dressing stick, sock aid, and metal shoe horn allows you to dress up quickly without bending or stretching.
  • Durable Equipment: The medical aids included in the hip replacement kit are made from durable material, making them resistant to any wear and tear and suitable for heavy-duty use.
  • Dress Independently: Perfect for people who are recovering from hip, knee, or other surgeries were dressing, bending and mobility is compromised or difficult.
Check Stock

Mssoomm 59.06 inch / 1500mm HSR20 HGR20 20mm Width Square Linear Motion Guideway Guide Rail +2Pcs HSR HGR20 CR Bearing Carriage Slider Slide Block for CNC Machine DIY and Linear Motion Products

  • SMALL SOUND: Innovative slider technology, smooth, low friction, silent operation.
  • ACCURACY: Precise production standards, high accuracy of the trajectory.
  • STABILITY: Can withstand the load in all directions, long service life.
  • BENDING RESISTANCE: Strong bending resistance, difficultly deformed and twisted, ensuring linear motion.
  • APPLICATION: Widely use in semiconductor manufacturing equipment, printed circuit boards, IC assembly equipment, medical equipment, robotic arms, precision measurement machine and other small linear motion device..
Check Stock

VEVOR Sheet Metal Brake 36 In Metal Bender Brake 910 mm Length Portable Metal Bender 0-90 Degrees Adjustable Steel Bender with 2 C-shaped Clamps Manual Sheet Metal Bender Tool for Metal Bending

  • Mini Metal Sheet Brake: Max. Bending width: 36 inches/910 mm.
  • Max. Bending thickness: 0.04 inches/1 mm. Our metal sheet brake is a great tool to bend....
  • 0-90° Flexible Bending: You can adjust to a specific angle between 0° and 90° according to your work needs. The metal bender brake is ideal for....
  • Two C-Shaped Clamps & Knobs: Effortless bending can be achieved through adjusting two lengthen handles. Pre-drilled touting holes allow mounting on....
  • Heavy Steel Construction: The sheet metal bending brake is well-built with premium steel. Solid construction will stand for many years of heavy use.....
  • Multi-Scenario Application: Our mini sheet metal bending brake allows the bending effortlessly and efficiently. It's sturdy enough for professional....
Check Stock

Performance Tool W1650 Porta Power Hydraulic Collision Repair Kit 4 Ton Multi-Power Set

  • Size: 8,000 Lbs. Load Capacity, Completed Kit Includes Most Commonly Used Equipment Needed For Pulling Pushing, Lifting, Bending, Straightening & Spreading.
  • Included: Jack Hose, 4 Ton Ram, Spreader Ram, Male Connector, Flat Base, 90° "V" Base, Wedge Head, Spreader Plunger Toe, Spreader Ram Toe, Flex Head, Serrated Saddle & Heavy Duty Storage Case.
  • Snap lock design for quick easy assembly, Perfect For Automotive, Truck Body And Frame Repair.
  • Can Be Used On Popping Dents Out Of Sheet Metal Doors Or Panels In Even The Smallest, Tightest Areas.
Check Stock

KAKA Industrial Manual Hand Brake Solid Construction with Steel Frame Stand (MB-36)

  • Lift gate service will have extra charges and can be requested for you at a discounted rate, please send us a message stating you need the service. A valid phone number is REQUIRED. The carrier will contact you one day before the delivery, please provide a valid phone number..
  • Bends sheet metal to 12 gauge (up to 18" wide), 16 gauge (up to 36" wide).
  • HIGH FLEXIBILITY CAN BE ACHIEVED THROUGH CHANGING THE BENDING ANGLE. The bending angel of this metal bending brake can rotate up to 120 degree. In a large extent, it will the adjustability of using this brake.
  • EASY OPERATION WITH UPPER AND LOWER HANDLE. This bending brake is very easy to operate. Both the upper handle and lower handle assist the operation of a project.
  • HIGH QUALITY BUILD AND CAN LAST FOR LONG TIME HEAVY USE. The compositions of this metal bending brake are solid heavy material that can last for long time operation. It would be a great purchase in term of long-term investment.
Check Stock

POETISKE Ladder Hooks Screw in Storage Hanger Wall Mount Heavy Duty Shelf Organizer for Bike Foldable Chair Garage Organization Vinyl Coated 4PC Black

  • [PREMIUM QUALITY MATERIAL] Our wall mount screw in hooks are made of high-quality galvanized steel which ensures heavy duty of load bearing and super sturdy material. And allows years of using without any bending or deforming. Each hook has a tough super grip, a no-mar vinyl coating that protects your valuable equipment..
  • [STURDY & DURABLE GARAGE ORGANIZATION] Perfect for garage equipment such as bicycle, ladder, hose, rake, cord, string, garden chairs, any indoor and outdoor tools, etc. Ideal tool to organize garage storage that keeps your space tidy and neat!.
  • [EASY INSTALLATION] With our unique design of sharp thread, our bike hooks can be easily screwed into the wood wall without the need for a guide hole. For drywall, proper anchors and the pre-drilled hole would be needed for the best result of the hook to stay secure..
  • [ITEM SPECIFICATION] Package includes 4 packs of ceiling utility wall hook with maximum load-bearing 75lbs. Overall height is 10.6", the interior length is 7.5". The uncoated screw part of the utility hook is 1.8". This is a relatively large heavy duty wall hook..
  • PREMIUM CUSTOMER SERVICE] If any of the items are missing or the received package is damaged, report to us and we will happy to make an exchange or refund. With any dissat....
Check Stock

BEAMNOVA Universal Metal Bender Set High Precision Benchtop Manual Rebar Scroll Wire Bending Machine for Copper Tube Iron Aluminum Steel Brass

  • MULTIPLE PURPOSE - BEAMNOVA universal metal bender is a multiple functional metal bending machine, which can be used to produce grids, doors, gates, balcony railing, patio furniture as well as wrought iron lamps..
  • BENDING DIFFERENT KINDS OF MATERIALS. - BEAMNOVA manual scroll bender is designed to cut different kinds of metal material, such as steel, brass, copper, aluminum, etc..
  • IDEAL FOR METALWORKING & REPAIR SHOPS - BEAMNOVA rebar bender is heavy-duty, but at the same time portable and easy to use, which makes it an ideal tool for repairs shop and metalworking shops..
  • GREAT BENDING CAPACITY - In terms of flat steel, BEAMNOVA metal bending machine can perform at 1.18” x 0.394” (30x10 mm).
  • as to round steel and square steel, it can bend 0.394”..
  • DURABLE DESIGN WITH EASY OPERATION - BEAMNOVA universal metal bender is assembled with heavy materials that can last for many year’s use. You can mount it onto a workbench or floor, increasing the flexibility of metal bending process..
Check Stock

ABN Ladyfoot Rolling Head 4-Piece Pry Bar Tool Set – 6, 12, 16, 20 Inch – for Automotive Machinery Aligning & Prying

  • MAKE ENGINE AND MACHINE WORK EASIER: When you need extra leverage to move heavy machinery in tight places, the ABN 4-Piece Rolling Pry Bar Set will always come in handy.
  • DUAL/DUO ENDS: Use the lady slipper pry bar end for extra leverage when lifting and prying.
  • The tapered (pointed) end can be used as an alignment pry bar to align metal sheets and parts.
  • PERFECT SIZE FOR YOUR NEEDS: Lady foot pry bar set includes 4 wedged pry bars in 6, 12, 16, and 20 inches (15.3, 30.5, 40.7, and 50.8cm).
  • Ideal for a wide range of work from small to large projects.
  • VARIETY OF DUTIES: Use this rolling wedge pry bar to line up subframes with the dowel end, to align bolt holes on two separate items, to pull seals and push stubborn bushings into place, and to move heavy equipment.
  • BUILT TO LAST: Drop-forged, heat-treated steel provides these rolling head prybar sets with maximum strength and resistance to bending, breaking, and corrosion.
Check Stock