ReviewsHeavy Duty Snowmobile Ramp

Ruedamann Loading Ramp with 750 Lbs Capacity, Foldable Aluminum Ramp for ATV/Motorcycles/Trucks (1 Piece, 7.5 Feet Length × 11 Inches Width, Raised Grain Non-Skid, Silver)

  • 【Perfect for Loading & Unloading】The loading ramp is made of aluminum which makes it long lasting and is lightweight with a weight of about 17.6 lb (8kg) only. This ramp can be used for both loading and unloading endless times without any hassle of it getting glitched as its made of heavy duty welded hinges, joints and crossbars. The hinges are 2.8 inches (7cm) in length which makes it 1 inch (2.5cm) longer than normal commercial ramps giving a safer loading experience..
  • 【Exclusive Construction】There are 3 fingers on the top surface of the loading ramp to help the vehicle from slipping off giving a more secure & reliable pick up. The soft tipped design also cuts down scraping between your ride and the ramp..
  • 【Heavy Duty& Safe】The ramp comes with heavy duty loading straps to securely fasten the ramp on to the tailgate to avoid movement hence you don't have to worry about buying the straps separately. While loading & unloading please don't ride the vehicle. Aluminum alloy has high hardness, toughness and resilience, please use it with confidence..
  • 【Track Dimension】The foldable size of the ramp is 45.4 inches x 11 inches x 5.7 inches (115 x 28 x 14.5cm) and the unfolded size of the ramp is 87.6 inches x 11 inches x 2 inches (222.5 x 28 x 5c....
Check Stock

EliteShield SnowShield Snowmobile Cover Heavy Duty Trailerable Snowmobile Storage Cover Fits up to 115 Inch Long Compatible with Polaris Ski Doo Arctic Cat Yamaha and More

  • TRAILERABLE SNOWMOBILE COVER : Heavy duty UV treated, waterproof polyester fabric protect your snowmobile against sun, snow, rain, dirt , pollutants and more. Excellent Snowmobile cover for all weather protection.
  • MEASURE SNOWMOBILE COVER SIZE: This snowmobile cover fits snowmobile size up to 115". Measure from the front nose of the snowmobile to the back of the snowmobile-Skis not included.
  • Elastic hem cord for a fast and tight fit. Durable UV treated, waterproof polyester fabric protect your snowmobile against sun, snow, rain, dirt, pollutants and more. Excellent Snowmobile cover for all weather protection.
  • QUICK AND SECURE FIT COVER: Full elastic cord around the bottom hem provide a fast and snug fit.
  • Built-in quick adjusting straps tightly secure cover for trailering and storage use.
  • Rear dual air vents to reduce moisture buildup and wind lofting.
  • Reflective rear safety markings avoid collision during night.
Check Stock

ECOTRIC Hitch Cargo Carrier with Ramp Foldable Hitch Mount Wheelchair Carrier Mobility Scooter Ramp 500 lbs Weight Capacity

  • This wheelchair carrier is made for easy loading and transporting of your wheelchair, scooter or other similar items. It can be used as a carrier and a ramp.
  • Heavy duty folding hitch makes our carrier more rigid and stronger.
  • Tie down straps can be hooked onto any of the tie down holes featured on the ramp sides. 3-position carrier (closed flat, open L-shape & open flat.Tie down straps can be hooked onto any of the tie down holes featured on the ramp sides. Handle on the ramp for easy folding and unfolding..
  • Total length of ramp when expended is 38.7 inch. Total weight of carrier 75 Lbs.
  • Weight of ramp (gate) 16 lbs. Easy to lift.
  • Weight Capacity of Ramp: Up to 500 lbs. Durable black powder coated finish.
  • Fits all 2" Receiver, hitch class III or IV.
  • Folding ramp can also be locked flat when not in use. Heavy-duty steel construction and internal spring loaded pull locks..
  • Note:Mobility devices are not to be occupied when loading, unloading, or on the carrier! Never exceed the rated capacities of your hitch. Hitch tightener is required to prevent the rack from wobbling,anti wobble plate is not included..
Check Stock

VIVOHOME 750 Lbs Capacity 7.5 Feet Aluminum Folding Loading Ramp Kit for Trailers Pickup Truck Car Tailgate ATV Motorcycle Lawn Mower

  • HEAVY DUTY CONSTRUCTION - This ramp is constructed of high-quality aluminum, which is rust- and corrosion-resistant and not easy to fade by the elements.
  • The arched design provides better load bearing capacity and traction so you can move heavy loads effortlessly.
  • 750 LBS CAPACITY - This ramp can hold up to 750 lbs. so it works well for scooters, dirt bikes, bicycles, or motorcycles or whatever else you need to load into your truck bed.
  • Double it to work for pickups, tractors, snow blowers, ATVs, golf carts, etc.
  • FOLDABLE DESIGN - Designed to be folded in half, compact enough to store in your garage or in your truck bed when you need to transport something.
  • Hollow design makes it lightweight and portable, as it weighs only 15 lbs.
  • SAFE DESIGN - 3 rubber tipped claws on each ramp keep vehicles from slipping and ensure safe transfer to your truck without collapsing or buckling.
  • An adjustable heavy-duty safety strap is included to keep the ramp firmly attached to the tailgate.
  • PRACTICAL TOOLS - Ramp measures 90" x 12" x 2" (L x W x H) before being folded, while the folded size is: 46" x 12" x 5.5" (L x W x H).
  • This loading ramp is a must-have if you need to take your vehicles with you.
Check Stock

Caliber TraxMat Snowmobile Traction 13210 54-inch

  • Protect your trailer deck or ramp from damage caused by studded snowmobile tracks.
  • Provides excellent traction and braking control when loading and unloading your snowmobile.
  • 16-inch wide x 54-inch long TraxMat includes all stainless-steel hardware for installation.
  • Versatile design works on solid surface ramps and tilt, V-front and enclosed trailer decks.
  • Made in the USA, limited lifetime warranty.
Check Stock

KEEPER 05674 Ramp Kit with Hardware,Black

  • Loading Safety: Keeper Do-it-Yourself Ramp Kit is a simple and convenient solution for loading lightweight vehicles with outstanding ease and reliability..
  • Durable Construction: Engineered to exceed loading requirements while optimizing space, the kit is comprised of two heavy duty, powder-coated steel ramp ends that sit securely on the tailgate and can withstand up to 700 lbs. capacity per ramp..
  • Ease of Installation: Includes all necessary installation hardware for easy attachment to 2 in. x 8 in. or 2 in. x 12 in. wooden planks..
  • Operation: Quickly and safely load motorcycles, tractors, ATVs, and other wheeled transports on and off your vehicle..
  • Compatibility: Compatible with most pick-up or heavy-duty vehicle truck beds..
Check Stock

BEJONI 67 x 8.7 Steel Loading Ramps for Truck & Trailer 950 lb Capacity Motorcycke Ramp Separated Ramp Kit for DIY Install 1 Pair

  • .... After retracting the ramp, The hole on the tension strap can be used as a handle through the raised lock on the other side, which is convenient to carry the ramp..
  • Packaging components: 2 loading ramps, 2 top support ramp kits, 8 mounting screws, 8 mounting nuts, 8 flat washers and 8 lock washers.After getting the heavy duty steel loading ramp, taking out all the accessories and install the top support ramp kit on the loading ramp. The sequence of washers is: install flat washer first and then lock washer.Confirm that the installation is firm before using the ramp..
  • The anti-skid design on the surface of the loading ramp can form strong traction and friction on the ramp surface. The back of the topboard is provided with EVA anti-skid pads, which can not only prevent the car from being scratched, but also form a certain friction force with the car to prevent slipping and falling..
  • The heavy duty steel loading ramp weighs about 15.4 lbs(7kg)/PC and the load-bearing capacity can reach 475 lbs(215kg)/PC. The load-bearing capacity of two pieces using together can reach 950 lbs(430kg).That can load motorcycles, lawn mowers, ATVs, trucks, snowmobiles, trailers and etc.Warranty period of our wheelchair ramp is 1-year, artificial damage is not within the warra....
Check Stock

VENDAV ATV Ramps for Pickup Trucks 7.5 FT Aluminum Portable Ramps 1500 Lbs Capacity,2PC.

  • ...easy to use,just open it and ready to use. No installation required.(Unfolded Size: 89*12”.
  • Folded Size: 46*12”).The motorcycle ramp are 46 inches when folded, will fit in most back seats for easy carry and easy storage..
  • ✪【PICKUP TRUCK RAMPS -- RUBBER TIPPED FINGERS&LOAD STRAPS】：These truck ramp include heavy duty load straps to keep the aluminum ramp firmly attached to the tailgate. This ensures safe transfer onto a truck without collapsing or buckling. Rubber tipped fingersprovide extra safety for your vehicle while also preventing damage to the tailgate..
  • ✪【PROFESSIONAL WELDING & MATURE PRODUCTION TECHNOLOGY】：Crossbars ，heavy-duty hinges, joints are professionally welded, so the powersports loading ramps can be folded and unfolded countless times without failure.The edge of portable ramp are nicely welded and cut with no sharp edges..
  • ✪【PERFECT LOADING AND UNLOADING】: These truck loading ramps are ideal for transferring any four-wheeled vehicle or two-wheeled vehicle to a truck trailer.A pair of ramps can be used as :ATV ramp ,dirt bike ramp,mower ramps,motorcycle ramps,lawn mower ramps,4wheeler ramps.One ramp is suitable for motorcycles, bicycles, etc..
Check Stock

Luyao Folding Wheelchair Scooter Carrier Rack Disability Medical Rack Ramp Hitch Mount New

  • Heavy-duty steel construction and internal spring loaded pull locks ,Durable black powder coated finish..
  • Fitment：Fits all 2" Receiver, hitch class III or IV..
  • Can also be locked flat when not in use Awelded handle featured on the ramp for easy folding and unfolding Tie down straps can be hooked onto any of the tie down holes featured on the ramp sides..
  • Loading Capacity: Up to 400 Lbs , Platform dimension 47"x 27" ，Ramp dimension 40" x 26".
  • Heavy duty internal spring loaded pull locks,Hitch tightener is not included,Has a 3" safety rail 3-position carrier (closed flat, open L-shape & open flat) ；.
Check Stock

Factor 55 00098 Synthetic Rope Spool, 0.438 Pin Diameter - Prolink XTV, Ultrahook XTV, Flatlink XTV

  • Universal design fits most open trailers.
  • LowPro GripGlides are installed on the ramp to make unloading your snowmobile and ATV simple.
  • Molded grips down the center to give your snowmobile track traction.
  • Lightweight HDPE not to crack, chip, break or wear out.
Check Stock

Burning Bridges (Re-Recorded In Stereo)

  • OVERCOME ANY CURB: The BISupply | 4-Inch Heavy Duty Ramps 2-Pack measures 23.6" x 11.1” x 3.75" inch (59.9cm x 28.2cm x 9.5cm) per shed ramp to provide access between a sidewalk and street curb.
  • VARIOUS APPLICATIONS: Use with your vehicle, mower, wagon, dolly cart, hand trolley, golf cart, motorcycle, boat or anything else with wheels to access a playground area, hospital, public and private parking lot, warehouse, and high traffic areas where curb access is required on a regular basis.
  • Designed for straight curbs, not intended for use on curved curbs.
  • Not recommended for wheelchairs due to steeper incline.
  • EASY TO USE: Pre-drilled mounting holes on either side of the shed ramps allow you to bolt the units together to make a double-wide step ramp (hardware included).
  • Use door ramp singularly or connected to create a 47.2-inch (119.9cm) extended driveway ramp.
  • Predrilled 5/16-inch anchor inset holes on front side (skinny edge) of automotive ramps allow for optional permanent mounting.
  • If mounting permanently on a public road, check for any required local city permits.
  • BUILT TO LAST: 4,000-pound (1,814kg) weight capacity per curb bridge ramp.
  • Made from heavy-duty plastic that does not emit a strong odor like rubber ramps.
Check Stock