ReviewsHeavy Duty Torsion Springs

Halo SLDACCKIT SLD Series Replacement kit, Grey

  • Use for installation of SLDSL4 or SLDSL6 into recessed housings.
  • Includes E26 adapter, torsion springs, & friction blades.
  • Mount torsion springs to SLDSL6 bracket for 5" or 6" housings.
  • Mount friction blades to SLDSL4 bracket for use in 4" housings.
Check Stock

Rockler Lid-Stay Torsion Soft Close Hinges (Pair of 2, Rustic Bronze) – 60” Pound Lid Support Hinge Soft Close Cabinet Hardware – Bronze Lid Hinge Support - Heavy Duty Hinge Hardware

  • Lid Support Hinge Heavy Duty: This torsion hinge lid support allows virtually any size lid to open smoothly, hold its position (when opened to 90 degrees, beyond that the lid will swing open), and then easily close. Use the torsion calculator to help determine your ideal lid support hinge combination..
  • Lid Stay Slow Closing: These rustic bronze lid stay torsion hinges support any size lid by simply adding more hinges & can be installed for both overlay and flush fitting lids. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers..
  • High Raising: These rustic bronze cabinet door supports are specially designed for safety and the design of heavy duty hinges ensure that the seat top raised position is at an over center 90-degree angle to prevent the lid from falling unexpectedly..
  • Easy Installation: Our box hinges are designed to fit 3/4" thick stock & are easy to install (instructions included). For ultra-fast and easy installation on these heavy duty industrial hinges, use our Torsion Hinge JIG IT (sold separately)..
  • Perfect Design: These soft close door hinges are the best solution for lids or flaps on furniture, cabinets, cupboards, or wooden storage boxes when a soft closing is required. hinges are available ....
Check Stock

Rockler Lid-Stay Torsion Soft Close Hinges (Pair of 2, Rustic Bronze) – 40” Pound Lid Support Hinge Soft Close Hardware for Cabinets – Bronze Lid Hinge Support - Cast-Zinc Heavy Duty Hinge Hardware

  • Lid Support Hinge Heavy Duty: This torsion hinge lid support allows virtually any size lid to open smoothly, hold its position (when opened to 90 degrees, beyond that the lid will swing open), and then easily close. Use the torsion calculator to help determine your ideal lid support hinge combination..
  • Lid Stay Slow Closing: These rustic bronze lid stay torsion hinges support any size lid by simply adding additional hinges & can be installed for both overlay and flush fitting lids. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers..
  • High Raising: These rustic bronze cabinet door supports are specially designed for safety and the design of these heavy duty hinges ensures that the seat top raised position is at an over-center 90-degree angle to prevent the lid from falling unexpectedly..
  • Easy Installation: Our box hinges are designed to fit 3/4" thick stock, & are super easy to install (instructions included). For ultra-fast and easy installation on these heavy duty industrial hinges, use our Torsion Hinge JIG IT (sold separately)..
  • Perfect Design: These soft close door hinges are the best solution for lids or flaps of furniture, cabinet, cupboard, or wooden storage boxes when a soft closing is required. Hin....
Check Stock

New! Garage Door Extension Springs - Stretch Springs - PAIR - for 7' high door (Green)

  • DESCRIPTION: Garage Door Torsion Spring For 7-8 Feet High Door (0.262x2x35) (Black/Right - Red/Left).
  • MATERIAL: Fabricated with high carbon ASTM 229 Class II Oil-Tempered Wire..
  • EXECUTION FACTORS: Spring Rate - Maximum deflection - Maximum load - Wind specifications..
  • CONE TYPE: Diamond cones, stationary cones..
  • CATEGORY: Garage Door Torsion Springs - Garage Door Hardware. Replacement spring(s) must match broken spring(s) measurements. Simple installation, just install new or replace old, rusty springs quickly (professional installation recommended).
Check Stock

DURA-LIFT .207 x 2\ x 23\ Torsion Garage Springs (Yellow, Left & Right Wound)

  • DESCRIPTION: Garage Door Torsion Spring For 7-8 Feet High Doors (0.295x2x41). (Black/Right).
  • MATERIAL: Fabricated with high carbon ASTM 229 Class II Oil-Tempered Wire..
  • EXECUTION FACTORS: Spring Rate - Maximum deflection - Maximum load - Wind specifications.
  • CONE TYPE: Diamond cones, stationary cones..
  • CATEGORY: Garage Door Torsion Springs - Garage Door Hardware. Replacement spring(s) must match broken spring(s) measurements. Simple installation, just install new or replace old, rusty springs quickly (professional installation recommended).
Check Stock

Porch Swing Springs Heavy Duty Kit (2Pcs -700 Lbs Rust Resistant Hanging Spring Kit for Hammock Chairs Yoga Punching Bag Ceiling Mount Porch Swing or Indoor Outdoor

  • ...ch as hammock chairs or ceiling mount porch swings, yoga, porch swing, hammock, sandbag, hanging chair, desk lamp, awning, sling trainer and so on, an ideal choice for your backyard, house, terrace, balcony and garden.003c/p003e.
  • 003cp003e003cb003e Safety and Stability, Shock Absorption: 003c/b003eHeavy-duty hanging springs are tightly coiled for shock absorption, reduce vibration and gravity. Not only is used for hanging chairs to provide comfortable feelings. Can also be used in industrial applications that need to reduce vibration and avoid shock 003c/p003e.
  • 003cp003e003cb003eHammock Chairs Swing Spring Sets, Feature: 003c/b003ePorch swing springs heavy duty 2 pack, Each end of the swing spring has a rubber tip preventing you from scratching your fingers or hands When you install the spring. In addition, it also prevents hooks from falling off during the installation process003c/p003e.
  • 003cp003e003cb003eEasy to Use:003c/b003e Attach the springs to your hooks or mounting brackets, then attach the porch chain, and the remaining porch chain goes on top of the top hook of the spring as a safety measure. Porch swing springs AKA porch swing springs heavy duty , porch swing springs heavy duty kit, porch swing springs stainless, porch swing springs heavy dut....
Check Stock

DEWALT Chop Saw, Quick-Change, 14-Inch, Old Model (D28715)

  • ...low easy bolt down to any work bench. The solid steel base also allows user to weld jigs or stops directly to the base..
  • Heavy-duty, lock-down pin allows head of the saw to be locked in the carrying position without the use of a chain.
  • Heavy-duty compression spring provides smooth movement and greater durability than torsion springs.
  • Spindle lock allows user to make wheel changes quickly and easily, saving time and money.
  • Large cutting capacity (5-inch round / 4-1/2-inch x 6-1/2-inch rectangle) provides the ability to cut a wide variety of materials.
  • Powerful 15.0 Amp/5.5 hp (maximum motor hp) motor provides more overload capacity.
  • Quick-Change blade change system lets users change wheels without a wrench.
  • Patented Quick-Fence tool-free, 45 degree adjustable fence allows for fast and accurate angle cuts.
  • Quick-Lock vise allows for fast clamping on different size materials.
  • Soft start extends gear and motor life, ergonomically designed handle.
Check Stock

AP Products 010-168 20\ Gas Spring

  • PROFESSIONAL GRADE LOCKING GAS SPRINGS: Made from heavy duty steel, our gas springs feature controlled pushing, lifting, and adjusting with the ability to rigidly lock in both directions to ensure zero movement.
  • HIGHLY SHOCK ABSORBANT: Our locking gas springs offer protection against vibration and light side forces with minimal friction for smooth movement and feature an integrated grease chamber.
  • ULTRA STRONG STEEL CONSTRUCTION: Precision crafted from heavy duty steel, our premium grade locking springs feature powder coated cylinders and CeramPro treated piston rod surfaces and are resistant to corrosion.
  • ENDLESS VARIATIONS AND APPLICATIONS: We offer a wide range of styles, and our gas springs are available with fast, normal, and slow extension speeds that are great for automotive and furniture use.
  • THE BEST IN THE BUSINESS: With over 100 years of experience in production we have evolved into a worldwide premium supplier of gas springs, electric linear actuators, special pneumatics, hydraulic pumps and accessories, and dampers.
Check Stock

scottchen PRO Garage Door Safety Cable for Extension Springs Galvanized Carbon Steel 8'8\ x 1/8\ 7x7 Strands - 1Pair

  • DESCRIPTION: Garage Door Torsion Spring For 7-8 Feet High Door (0.262x2x35) (Black/Right - Red/Left).
  • MATERIAL: Fabricated with high carbon ASTM 229 Class II Oil-Tempered Wire..
  • EXECUTION FACTORS: Spring Rate - Maximum deflection - Maximum load - Wind specifications..
  • CONE TYPE: Diamond cones, stationary cones..
  • CATEGORY: Garage Door Torsion Springs - Garage Door Hardware. Replacement spring(s) must match broken spring(s) measurements. Simple installation, just install new or replace old, rusty springs quickly (professional installation recommended).
Check Stock

Garage Door Torsion Spring Wire Measuring Tool for Springs

  • Torsion springs are black coated, corrosion resistant, oil tempered and made in the U.S.A..
  • Includes pair of springs(left and right), nylon bushing and winding bars.
  • Springs come with a 3 year limited warranty.
Check Stock

Pair of 218 X 2\ X 21\ - 33\ Garage Door Torsion Springs with Winding Bars (24)

  • Torsion springs are black coated, corrosion resistant, oil tempered and made in the U.S.A..
  • Includes pair of springs(left and right), nylon bushing and winding bars.
  • Springs come with a 3 year limited warranty.
Check Stock