ReviewsHeavy Duty Welding Alternator

WeldingCity 100-ft 2-AWG USA-made Heavy Duty Welding Cable Highly Flexible Durable EPDM Rubber Jacket 600V -50C-105C Black

  • USA-made 2 AWG heavy duty welding cable (EPDM rubber jacketed black cover) for use where maximum flexibility and resistance to cuts, tears, abrasion is required. Max volt 600V, -50C to 105C. Resistant to chemicals, oils, and acids and is also weather, ozone and sunlight resistant. Available welding cable sets: welding cable only.
  • cable set with terminal lugs and cable set with Dinse connectors..
  • Welding Cable Set With Terminal Lug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp and three zinc-plated copper terminal lugs (1/2" stud hole)..
  • Welding Cable Set With Dinse Plug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp, one zinc-plated copper terminal lug (1/2" stud hole) and two Dinse-type 35-50mm male connectors..
  • Heavy duty 300-amp stick electrode holder with strong jaw spring.
  • both upper and lower jaws made of copper (brass) with increased operator comfort. Zinc-plated steel 300-amp work clamp with strong spring, copper plated jaw, copper braid, copper plated hex screw for secured cable connection. Dinse-type twist-lock cable connector (male) with heat and oil resis....
Check Stock

NewMar 150-a 150 Amp Noise Filter

  • Integral mounting flanges for secure installation.
  • Brass stud connectors on alternator filters accommodate high cables and terminals.
  • Color coded wire leads on all other models make in-line installation easy.
Check Stock

Clore Automotive Solar 1874 500 Amp Carbon Pile Battery Load Tester

  • Enables starter and alternator assessment.
  • Heavy-duty clamps penetrate corrosion on battery terminals.
Check Stock

Clore Automotive Solar 1876 1000 Amp Carbon Pile Battery Load Tester

  • Enables Starter and Alternator assessment.
  • Large, easy-to-read gauges,Operating Voltage : 6/12/24 Volt,Cable Reach : 56"Inch.
  • Heavy-duty clamps penetrate corrosion on battery terminals.
Check Stock

Welder Extension Cord 50 ft 10,000 Watts Nema 6-50 250-Volt Welder Extension Cord 8 Gauge Lighted end 8/3 Welder Extension Cord 50 amp Plug ETL Approved Welding Extension Cord 6/50 8 AWG

  • welder extension cord 8 gauge the plug is 6-50, 50amp welding extension cord 220v.
  • 40 Amps extension cord welder extension cord 50 amp plug , 8 awg extension cord 50 ft 8/3 stw 50 ft. 6-50 anti cold weather welder extension cord 50 ft.
  • welder extension cord 8 AWG UL Listed Heavy duty 8 AWG copper wire 6-50 NEMA plug and connector designed for use on all portable welders 8/3 extension cord 50 ft.
  • 8 gauge extension cord 50 ft welding machine cord with 50Amp nema 6-50 plug extension cord for heavy-duty welding tasks.
  • 8 Gauge 50 Ft Welding Cord power extension cord rated at 50A, 600V, 50 feet. Features in excellent abrasion, oil and moisture resistance and flexibility fits to extend the welding machine. It can be directly connected to your homes electrical system, extension cord 50 amp.
Check Stock

Forney 72749 Wire Wheel Brush, Twist Knot Crimped with 1/2-Inch and 5/8-Inch Arbor, 6-Inch-by-.020-Inch

  • 6, twist knot wheel wire brush, arbor 1/2-5/8, wire size.
  • Twist knot wire wheel brushes provide high impact.
  • These wheels are used in surface preparation prior to welding.
  • Also great for removing weld scale, spatter and heavy corrosion.
  • Used for heavy duty cleaning applications.
Check Stock

Welding Blanket heavy duty 4x6 ft 850GSM Thick 24 Sq Ft High Temp Welding Blanket Fireproof Soldering Blanket Welding Floor Blanket Welder blanket Welding Blankets Fire Blankets for Welding Fiberglass

  • [HEAVY DUTY WELDING ACCESSORIES] Welding blanket for smoker comes with size 6' x 4' (122x183 cm), thickness: 0.04” (1 mm). Welding blanket fireproof is made of 850 GSM (24.7 oz/yd²) reinforced, strong, durable & tear resistant fiberglass material. Welding blankets serve as an excellent shield against heat and fire. Kevlar stitched fine edge, highly pliable. Soldering blanket has tight weaving pattern, 30 x 30 per inch² to keep it bound together and reduce wear and tear for ultimate durability..
  • [EASY TO USE] 1 grommet (0.43" diameter) on each edge. Easy to hang small welding blanket heavy duty as curtain if needed. OR drape over equipment or floor as a protective curtain to shield from ember, sparks, fire, or heat from welding equipment. Use LEBERNA high temp welding blanket for insulation in industrial or home projects. Welder blanket welding tarp shields against grill or smoker heat, fireplace & grinding debris. It is light weight foldable and shields barbeque bbq equipment..
  • [SAFE THERMAL PROTECTION] Fire retardant blankets have high thermal protection capability and withstands working temperatures up to 1,022℉ (550℃). Fire retardant blanket is ideal for MIG, TIG, and other welding application. Fire retardant mat is highly effective in prote....
Check Stock

Reliancer 3-Tier Rolling Welding Cart MIG TIG ARC Plasma Cutter Machine Heavy Duty Welding Welder Cart 180 Lbs Weight Capacity with Tank Storage & 2 Cable Hooks & Safety Chain Plasma Cutting Equipment

  • 【Rugged Iron Construction】The sturdy and durable welding cart is all-iron construction with satin black powder coated finish that is rust proof and wear proof for years of use!Heavy duty with a total load capacity of up to 180lb which is enough to hold your welders plus plasma cutter on the same welding cart,also accommodate gas bottle,tidy up your work space,help you find your welding accessories and tools right away!Suitable for a quick welding job or a big project at home garage & workshop.
  • 【3 Shelves for Easy Access and Storage】The welder cart featured with 3-level shelves that provides ample storage space to organize your welding tools and equipments,help you built a neat and ordered garage or workshop!Spacing between each shelf is convenient and easy to access whatever tools you need!The top shelf accommodates most welders and plasma cutters.The middle and bottom shelves allow storage of necessary welding accessories,such as welding helmet,welectric drill,welder wire,etc..
  • 【Cylinder Rack w/Safety Chain】The 3 tiers welder cart is equipped with a spacious rear shelf for storing shielding gas bottle up to 9.6in diameter,comes with an extended chain to keep tank securely in place,add more stability and safety!Cut out in rear to allow plas....
Check Stock

2 Pairs Deerskin Leather Work Gloves for Men & Women, Heat Fire Resistant Forge Welding Gloves, Rigger Gloves for Driver, Construction, Yardwork, Gardening, BBQ (M, Brown)

  • Deerskin Leather Work Gloves - 100% Genuine deerskin leather, nature tanning, comfortable and durable. High quality thick deerskin material, superior abrasion and puncture resistance, protect your hands from cuts and scratches..
  • Forge Welding Gloves - Fire Resistance heavy duty deerskin and fireproof aramid fiber thread, meet NFPA2112, EN11612, EN11611. Perfect protection for your hands when welding or forging or other high temperature work..
  • Heavy Duty Work Gloves - Details: Soft fitting and thick deerskin material, excellent stitching process, ergonomic curved design, make heavy duty work gloves more comfortable. Foldable and not deform. Adjustable wrist design, easy for on and off, and dust stop during workplace..
  • Multi-Purpose Use Work Gloves - Perfect Fit for men & women, these deerskin leather work gloves ideal for Construction, Yardwork, Driver, Gardening, Farming, Landscaping, DIY projects, wood cutting, welding, BBQ, camping, animal handling, etc...
  • SATISFACTION GUARANTEED - If any leather work gloves not perform to your satisfaction due to a material defect or craftsmanship defect within 90 days, we will replace it for you or provide a full refund. If you have any questions, please feel free to contact us..
Check Stock

Leather Welding Work Jacket by QeeLink - Flame-Resistant Heavy Duty Split Cowhide Leather (Large)

  • SUPERIOR PROTECTION: Heat & Flame-Resistant heavy duty split cowhide leather welding Jacket. Full coverage Leather Jacket protect you from spark, spatter and heat when you are working..
  • MORE DURABLE: Sewn with heat resistance US Kevlar thread for strength and durability. Heavy duty corrosion resistant rivets are placed in high-stress areas to ensure longer product life..
  • 4 TOOL POCKETS: Large Inside pocket, Large Outside pocket and 2 soapstone pocket on each sleeve for storage..
  • ADJUSTABLE NECK, CUFFS and WAIST: The neck, cuffs and waist can be adjusted. They can ensure a comfortable and secure fit. Prevent debris from entering through common jacket gap..
  • MULTI - FUNCTION. They are not only for welding but also useful for many other work and home tasks. Idea forIdeal for blacksmithing, steel mills, shipyards, manufacturing, automotive, gas welding, torch work, woodworking..
Check Stock

RX WELD Oxygen & Acetylene Gas Cutting Torch and Welding Kit Portable Oxy Brazing Welder Tool Set with Two Hose,Goggles,Regulator Gauges,Storage Case-Portable Cutting Torch Set Welder Tools

  • 【OXY ACETYLENE TORCH KIT】Our Oxygen Acetylene Torch Kit for Welding and Cutting is a 15 piece kit that comes in a heavy-duty plastic blow-molded case for easy storage and transportation.
  • Whether you are an amateur metalworker or a seasoned professional, this gas welding torch kit is easy to use and allows you to cut, weld, braze, and solder with precision and efficiency.
  • 【Outstanding Performance】The oxygen & acetylene welding kit enables you to cut up to 6” and weld or braze up to 1/2” with appropriate tips. Full 2 1/2” diam high capacity oxygen and acetylene regulators provide optimal performance. Acetylene Tank Connector: CGA-510 Fits all Acetylene Cylinders EXCEPT Sizes MC and B.
  • Oxygen Tank Connector: CGA-540 Fits all American Oxygen Cylinders..
  • 【EASY TO USE】 To use this torch, attach the appropriate tip for your project, connect the oxygen and gas tank to the torch handle, and set the PSI to the necessary positions.
  • Once you have ignited and adjusted to a neutral flame, move the flame to the metal and push the valve handle slowly.
  • Move the torch tip slowly along the line of your cut until the metal has fully parted.
  • 【Complete Accessories】The portable oxy brazing welder features with hoses,welding and cutting torches,goggles,tip....
Check Stock