ReviewsHeavy Equipment Jack

9TRADING 50 Ton Air/Hydraulic Bottle Jack Super Duty Auto Truck RV Repair Lift with Handle

50 Ton Air / Hydraulic Bottle Jack Super Duty Auto Truck RV Repair Lift w/Handle.
This All Purpose Hydraulic Jack Easily Handle Lift Jobs Up To 50 Ton. Can Be Used With Air or Manual. Ideal For Automotive, Heavy Duty Truck Repair, Moving Machinery And Heavy Equipment And A Variety Of. Maintenance Applications.
Durable Rugged Steel Construction. Minimum Height: 10-1/2" , Maximum Height: 17".
Lifting Height: 6-5/8" , Air Rubber Hose Length: 48" , Air Valve And Inlet: 1/4" X 18NPT.
Working Pressure: 120-200PSI , Max Pressure: 220PSI , Comes with 2 Wheels & Handle.

Check Stock

Lippert Power Tongue Jack Electric Trailer A-Frame 3,500 lbs 18-Inch Stroke 5.4-Inch Foot Pad Durable Textured Casing Emergency Manual Crank Override 10.75 Retracted 28.75 Extended - 285318

EASY INSTALLATION — Complete with all necessary hardware and pins, installation for the Power Tongue Jack is fast and simple, so you can get to lowering and raising your equipment in no time.
TIME-SAVING — Say goodbye to cranking your manual jack. With the push of a button, you can raise or lower your a-frame trailer in a fraction of the time, without breaking a sweat.
INTEGRATED LIGHTING — Four integrated LED lights illuminate the ball and coupler, so you can operate your jack at night, worry-free.
POWERFULLY ENGINEERED — Built to do heavy lifting, the Power Tongue Jack has a 3,500 lb. lift capacity, helical-cut gears, 30 AMPs of power, and a 12V motor — all designed to get the job done, quietly and efficiently, so you don't have to.
BUILT TOUGH — Made from heavy-gauge, steel construction, a durable, textured housing that prevents chips and cracks, and a black powder-coat finish — this jack was designed to operate, day after day.

Check Stock

BUNKER INDUST Offroad High Lift Jack with Pair Traction Board Mate,48" FarmJack with Sand Mud Snow Track Mat Board,4x4 4WD Offroad Tire Recovery Kit for Car Truck Jeep ATV SUV UTV

...from being used on loads greater than 7000 pounds.The traction mat is 10 tons capacity on flat ground.
【Lift your 4WD out of any Situation】High Lift Farm Jack 48" with Recovery Tracks is more professional and better for off-road travelling 4x4. Lift, push, or pull equipment, small buildings and trucks.Also, it is great for farm use,use for fence work, winching, removing stumps, and dozens of.
【2 Pcs Traction Mat with Jack Lift Base】 Superior ramp design and unique shovel feature of this traction mat to get you out of the mud, snow, sand or any type of loose terrain.Large size (47.64incn*12.95in) of the traction mat is perfect for all vehicles, contains 2 mats per set Ideal for off-road use.This traction mat can be easily carried by almost anything with four-wheels and ensure an easy way out if your vehicle becomes stuck.

Check Stock

AKRON PRODUCTS C-79 Floor Jack, 4'5\-7'9\ (Pack of 2)

...ion manual handle, whose length can be changed freely, which is convenient to use, and the thickened steel pipe is not easy to deform. Portable handle increases flexibility and convenience..
APPLICATION-Toe in jacks are widely used in the installation and maintenance of railway track, bridge construction, mechanical equipment and other engineering projects. It is also uesd for loading and unloading of large goods in transportation, automobile and tractor maintenance..

Check Stock

HPDMC 5 Ton (10,000 lb) Capacity Dual Position Hydraulic Forklift Service/Floor Jack

...jack lift is made of heavy-duty steel material, and the high-quality steel is heat-treated for durability. Thicken base, large oil filler hole, portable handle, and wearable spindle provide you an excellent toe jack..
Various Application Area: Toe jack is widely used in the installation and maintenance of mechanical equipment, bridge construction, railway track, and other aspects, the loading and unloading of large goods in transportation, the repair of automobiles and tractors, etc..

Check Stock

VCT 10 TON Hydraulic Pull Back RAM for Porta Power Tool

The hydraulic ram that hooks right up to a 10 ton hydraulic pump, like in a 10 ton portable power. This is perfect for body work on trucks, tractors, and heavy equipment..
This unit is made for bending, straightening, and pulling. Use for auto/truck body work, farm, construction equipment, old home and barn restorations and a lot more..
10 Ton Maximum ram capacity, Rugged forged steel swivel hooks, 5" pulling distance..
Pulling ram, (pull back jack) used for pulling two pieces towards each other.
Overall Length: 26" with a 5" pulling distance.

Check Stock

XtremepowerUS 4-Ton Hydraulic Bottle Jack Portable Hydraulic Jack Lift Farm RV Truck Lifting Equipment Shop

Durable Material - This hydraulic jack is all-steel construction, very sturdy and safe when use. With the hydraulic steel cylinder unit, it results in lower oil pressure needed to raise the load, which helps to reduce wear and extend service life.
Multi-functional Use - It features a high quality glide action pressure pump, it is easy to lift farm vehicles, heavy-duty machinery, industrial construction equipment and other hard-hitting commercial uses.
Adjustable Height - With heat treated extension screws, this bottle jack allows to adjust the lifting height. The maximum lifting height is 14.

Check Stock

BIG RED 10 Ton (20,000 lb) Capacity Heavy Duty Steel Jack Stands, 2 Pack, High Profile, T90106

Heavy-duty jack stands are used to support your vehicle after lifting with a jack.
Constructed of high-grade forged steel with a welded frame design for durability.
Handles a wide range of vehicles and equipment, including agricultural and industrial applications.
Adjustable height ranges from 28.1" to 46.5" with a 10 ton (20,000 lb) load capacity.
Wide foot base measures 15.7" L x 15.7" W, providing added strength and stable support.
Features a large saddle surface area for better contact with the load being supported.
Includes a limited 1 year manufacturer warranty.

Check Stock

Torin 10 Ton (20,000 lb) Capacity Heavy Duty Steel Jack Stands, High Profile, 2 Pack, T80106 , Black

Heavy-duty jack stands are used to support your vehicle after lifting with a jack.
Constructed of high-grade forged steel with a welded frame design for durability.
Handles a wide range of vehicles and equipment, including agricultural and industrial applications.
Adjustable height ranges from 28.1" to 46.5" with a 10 ton (20,000 lb) load capacity.
Wide foot base measures 15.7" L x 15.7" W, providing added strength and stable support.
Features a large saddle surface area for better contact with the load being supported.
Includes a limited 1 year manufacturer warranty.

Check Stock

TCE 10 Ton (20,000 lb) Capacity Heavy Duty Steel Jack Stands, High Profile, 2 Pack, T70106 , Blue

Heavy-duty jack stands are used to support your vehicle after lifting with a jack.
Constructed of high-grade forged steel with a welded frame design for durability.
Handles a wide range of vehicles and equipment, including agricultural and industrial applications.
Adjustable height ranges from 28.1" to 46.5" with a 10 ton (20,000 lb) load capacity.
Wide foot base measures 15.7" L x 15.7" W, providing added strength and stable support.
Features a large saddle surface area for better contact with the load being supported.
Includes a limited 1 year manufacturer warranty.

Check Stock

JEGS Air Over Hydraulic Air Jack - 22 Ton Air Hydraulic Floor Jack (44,000lbs) Capacity - 120 to 200 PSI Operating Range - Yellow Steel Heavy Duty Air Hydraulic Jack

Ideal for lifting cars, trucks, farm vehicles, heavy-duty machinery, industrial equipment, and more up to 22 tons..
Lift Range: 9 to 17 inches. Raise your load to your desired height, while the extension screw helps you fine-tune height from there..
Compact, but mighty design easily slips into small spaces while not sacrificing the lift capacity of the 22 ton air jack..
Includes: (1) 50 in. 3-Position Handle, (1) 4 ft. x 3/8 in. Air Hose, (2) 8 in. Wheels..
Ideal for lifting axles, farm vehicles, heavy-duty machinery, industrial equipment, and more..

Check Stock