ReviewsHeavy Load Relay

5 Pack 40/30 AMP 12V DC Waterproof Relay and Harness - Heavy Duty 12 AWG Tinned Copper Wires, 5-PIN SPDT Automotive Relay

Never go beyond its capabilities. Try to stay 10 to 15% below what the rate is for.
12-volt 4-prong relay. Excellent water-repellent and dustproof ability, but not using it in water.
For the people whose relays are burning, please make sure you are making tight connections (especially on the load wires), read the specs on the item description, and ensure that the operating environment meets the safety requirements of the relay.
Be careful when inserting the relay into the socket. If you force it, you will bend the female connectors.
Thick 12 gauge wire for the load terminals. Easy to install just make sure you follow the wiring diagram. Works for both positive and negative activation.

Check Stock

3v Relay Board Raspberry Pi Arduino Relay Module 1 Channel Opto-Isolate High Level Trigger for IOT ESP8266 Microcontrollers Development Board

【1 Channel Relay Module】- This Relay Board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller IO..
【Main Specification】- The 3v Relay 1 Channel power switch module compatible with 10A 250VAC and 10A 30VDC load.4pcs * 2.5 mm Fixed Bolt Hole..
【Adopted Optocoupler Isolation】- 3V/3.3V power relay module supports photocoupler isolation control and dual power supply input ensure high anti-interference ability. Fast response time less than 20ms and long life time up to 100,000 times snap action with diode freewheel protection..
【Jumper Caps】You can select whether the relay and the signal use the same power supply or not by removing the jumper caps on the pins. And It is better to share the same power supply, because that is more convenient for using..
【Wide Application】- These 3v relay board works well with Arduino/ ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4/3.3V /NodeMCU/IOT/ ESP8266 module etc..

Check Stock

NTHREEAUTO 2 Pin Electronic Flasher Relay, Adjustable 12V Relays Fix for LED Turn Signal Hyper Flash, Universal

Speed Adjustable - Fix motorcycle turn signal hyper flash, allow LED light to blink at the normal rate, anticlockwise turn faster, clockwise turn slowly..
Parameter - Flashing Frequency: 50 times/min to 200 times/min. Operating Voltage: 12V (11V-15V). Switch Power: 0.02A to 12A. Working Temperature: -40°C to +80°C. Max Power: 42W, means that the power of all LED bulbs must be low than 42 W. If more than 42 W, may required install load resistors..
Waterproof - Turn signal flasher relay is waterproof design, stable and durable, easy to install..
Plug and Play - Directly replace the old relay. Eliminate the need for tapping wires to install the load resistors..
Buy with Confidence - Package included: 1PC 2 Pin motorcycle LED flasher relay.
You are backed by 6-Month warranty since order purchase date.Please feel free to contact us if you have any questions..

Check Stock

3V Relay Power Switch Board, Icstation 1 Channel Optocoupler Module Opto Isolation High Level Trigger for IOT ESP8266 Development Board (Pack of 5)

【Optocoupler Isolator】 3V/3.3V power relay module supports photocoupler isolation control..
【High Level Trigger】The relay module is triggered by high level signal, which can be input from microcontroller IO..
【Jumper Caps】You are free to select whether the relay and the signal share the same power supply or not by removing the jumper caps on the pins or not. It is recommended to share the same power supply, because that is more convenient for using..
【Rotate Screw Terminals】 The external connection adopts a rotary crimping terminal, which makes the crimping more firm, and has fixed mounting holes for easy installation..
【30VDC 250VAC Load】The power switch is compatible with 10A 250VAC and 10A 30VDC load..

Check Stock

Weewooday 15 Pieces 5V Relay Module 1- Channel Relay Control Boards with Optocoupler Isolation High and Low Level Trigger Expansion Board

Relay module: this relay board supports high and low level trigger and can be controlled by any 5V digital output of the microcontroller.
Parameter details: maximum load of normally open interface: AC 250v/ 10A, DC 30v/ 10A, trigger current is 5mA.
The 5v relay control board adopts SMD optocoupler isolation, which has strong driving ability and stable performance.
Practical design: with fault-tolerant design, the relay module will not operate even if the control line is disconnected.
All interfaces can be provided through directly connected terminal s since the humanized interface design, it is very convenient to use.
High compatibility: the relay module can be directly controlled by the 5V logic signal provided by the microcontroller, suitable for 8051, Raspberry Pi, PIC, DSP, ARM, AVR, MSP430, TTL logic, etc..
Wide application: this 5V relay board can be applied with Raspberry/ CNC machine/ ARM/ PIC/ AVR/ MCU/ PS4 and more.

Check Stock

Dayton 1UHH4 Line Voltage Control, Heat, Cool, Analog

Price For: Each Cooling Full Load @ 120V: 13.8A Voltage Range: 110 to 125VAC Enclosure Type: Steel Color: Black Switch Action: Close On Rise Includes: 6 ft. Cord Standards: ETL C/US Switch Type: SPST Number of Switches: 1 Sensor Type: Bi-Metal Height: 5-1/2" Features: HSJ Cord with Piggyback Plug, Mount with Suspension Chain or Wire.
Control Range: -10 Degrees to 100 Degrees F Differential: 6 to 8 Degrees F Full Load Amps: 13.8A Number of Relay Inputs: 1 Number of Relay Outputs: 1 Input Voltage: 120VAC Locked Rotor Amps @ 120V: 58.8A Application: Cooling Only Inductive Amps @ 120V: 13.8A Cooling Locked Rotor @ 120V: 58.8A Contact Rating Resistive @ 120V: 13.8A Mounting Type: Suspension Chain or Wire Item: Line Volt Mechanical Tstat.
Full Load Amps @ 120V: 15A Depth: 2" Width: 2-1/2" Number of Stages: 1 Country of Origin (subject to change): China.

Check Stock

Nilight Wiring Harness Kit 14AWG Heavy Duty 12V On-Off Switch Power Relay Blade Fuse for Off Road LED Work Light Bar-ONE Lead,2 Years Warranty

Universal fitment: the wiring harness is compatible with all automobiles, boats and devices equipped with a 12V DC power source.
12 feet harness: 12ft heavy-duty harness, 14-gauge stranded wire, up to 380W load capacity, the length from relay to switch is extendable.
Illuminated switch: 3 pin on/off rocker switch with Red Indicator light when truing on, easy to turn on or off, long service life.
Circuit protection: power relay for safety protection. Blade fuse acts as the first Line of defense against overcurrent and short circuit.
Package include: 1 x 12 feet wiring harness, 1 x instructions.

Check Stock

Nilight LED Light Bar Wiring Harness Kit - 1 Lead 12AWG Heavy Duty 12V On Off Switch Power Relay Blade Fuse for Off Road LED Work Light,2 Years Warranty

10 feet harness: 10ft heavy-duty harness, 12AWG stranded wire, up to 450W load capacity, the length from relay to switch is extendable.
Illuminated Switch 3 pin on/off rocker switch with red indicator light when truing on easy to turn on or off has been passed test of 5 000 times pressing.
Circuit Protection Power relay-safety protection and conversion circuit Blade fuse protects the circuit when overcurrent or short circuit occurs.
Wide application: suitable for almost all 12V battery vehicles, such as jeeps, ATVs, UTVs, cars, motorcycles, ships, yachts and trailers.
Package include: 1 x 10 feet wiring harness, 1 x instructions.

Check Stock

Upgraded TJ690380 90-380 Fan Relay by PartsBroz - Compatible White Rodgers - Replaces AP4485598 620537 90380 92380 - Compact, Totally Enclosed Design - Coil Voltage 24 VAC

90-380 Heavy Duty Switching Fan Relay - A high-quality exact equivalent for part numbers TJ690380, AP4485598, 620537, 90380, 92380, D90-380. This item operates in any position..
Compatibility with major brands - Heavy Duty Universal Relay is compatible with White Rodgers appliances. Our relays fit hundreds of models and can be installed in a few minutes..
Quick DIY repair - TJ690380 90-380 Fan Relay Replacement will help if your previous part is worn out. Element by PartsBroz is with isolated coil. Wear work gloves to protect your hands..
Attentive support - If you are uncertain about whether the relay fits your HVAC unit, we will help you. We generally put forth a valiant effort to guarantee you are totally happy with your purchase..
High-quality elements - Heavy-Duty Enclosed Fan Relay meets or exceeds all manufacturer specifications. We provide a lifetime warranty and guarantee 100% money back..

Check Stock

AITRIP 1PCS 8 Channel 5V Solid State Relay Module Board High Level Trigger Compatible with Arduino Uno Duemilanove MEGA2560 MEGA1280 ARM DSP PIC (1PCS)

Solid State Relay Module Board has been assembled, and electrical test passed.
Size: 155 x 55 x 24 mm (approximately 6.1 x 2.17 x 0.95 inch).
Has been assembled, and electrical test passed. Led indicator for each relay. Size: 155 x 55 x 24 mm (approximately 6.1 x 2.17 x 0.95 inch) Input control signal voltage: 0V - 0.5V Low stage (SSR is OFF), 0.5V - 2.5V (unknown state), 2.5V - 20V High state (SSR is ON).
Load voltage range: 75 to 264VAC (50/60Hz).
Load current: 0.1 to 2 AMP Standard interface that can be controlled directly by microcontroller (Compatible with Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).

Check Stock

[2 Pack] DC 6-30V Timer Relay Programmable Delay Relay Module Cycle Timer with LCD Display / 5V Micro USB, Smart Home Controller

【Multifunction Timer Relay】Programmable delay modes to control the relay timings, widely used at smart home, industrial control, automatic irrigation, indoor ventilation, protection equipment etc..
【Load Range】Operating voltage: DC 6V - 30V, support micro USB 5V power supply. High level trigger: 3V - 24V. NO(Normally open) maximum load < AC 250V/10A, < DC 30V/10A. Timing range: 0.1s ~ 999mins (continuously adjustable)..
【Reverse Protection】Built-in a diode to provide protection against accidental reverse polarity for the circuits..
【Sleep Mode】If no operation within 5 minutes, the digital tube of the relay board will turn off automatically. Pressing any button can wake it up..
【Parameter Setting】OP(conduction time) / CL(off time) / LOP(circuit times) can be set individually, and the parameters are mutually independent. All parameters are permanently saved once set. The functions and parameters can be reviewed or changed at a later time..

Check Stock