ReviewsHeavy Thickness Steel Pipe

FATAWKC Sail Shade Pole Kit, 8.9FT Sun Shade Sail Pole Kit, 1.8\ Diameter Outdoor Sun Shade Sail Poles for String Light, Patio, Backyard (1Pack)

  • Quality Materials-FATAWKC sun shade sail pole is made of good quality steel, strong wind resistant, and rustresistant..
  • Unique Design--Most innovative designDifferent from the threaded connection of other manufacturers, the thread reduces the thickness of the steel pole body and is prone to breakage in the case of strong winds and heavy loads.FATAWKC Sun Shade sail Poles adopt a unique connection design of large and small heads, which not only avoids reducing the thickness of the steel pipe, but also ensures the stability of the connection..
  • Product includes--FATAWKC Outdoor Sun Shade SailPoles consists of 1x top rod with 3 fixed rings +2x middle rod + 1x buttom rod with fixed base (canvas not included)And the sail ring is directly welded to the pipe.We make every effort to make your sunshade sail stronger.
  • WideApplication--Sun shade sail poles can be installed on hard ground such as cement, concrete or wooden decks,Sun shade sail poles are suitable for garden, backyard, courtyard, private swimming pool, courtyard, etc.This pole is not suggested to use on grass or soft soi.
  • Customer Service– if any issue with your order, please feel free to contact us through your order with detailed photos, We'll try our best to solve any problem for coustomers.
Check Stock

FATAWKC Sail Shade Pole Kit, 8.9FT Sun Shade Sail Pole Kit, 1.8\ Diameter Outdoor Sun Shade Sail Poles for String Light, Patio, Backyard (4Pack)

  • Quality Materials-FATAWKC sun shade sail pole is made of good quality steel, strong wind resistant, and rustresistant..
  • Unique Design--Most innovative designDifferent from the threaded connection of other manufacturers, the thread reduces the thickness of the steel pole body and is prone to breakage in the case of strong winds and heavy loads.FATAWKC Sun Shade sail Poles adopt a unique connection design of large and small heads, which not only avoids reducing the thickness of the steel pipe, but also ensures the stability of the connection..
  • Product includes--FATAWKC Outdoor Sun Shade SailPoles consists of 4x top rod with 3 fixed rings +8x middle rod + 4x buttom rod with fixed base (canvas not included)And the sail ring is directly welded to the pipe.We make every effort to make your sunshade sail stronger.
  • WideApplication--Sun shade sail poles can be installed on hard ground such as cement, concrete or wooden decks,Sun shade sail poles are suitable for garden, backyard, courtyard, private swimming pool, courtyard, etc.This pole is not suggested to use on grass or soft soi.
  • Customer Service– if any issue with your order, please feel free to contact us through your order with detailed photos, We'll try our best to solve any problem for coustomers.
Check Stock

Champion Cutting Tool Corp Circular Saw Blade 5-3/8", 50T (RZR-538-50-ST)- Cut Stainless

  • New & innovative, RZR Cermet tipped circular saw blades cut faster and 2X longer than standard carbide tipped blades. Cermet = a ceramic and metal compound that resists heat and friction.
  • Razor sharp cermet teeth, specifically engineered to cut stainless steel resist and dissipate heat for cool, smooth, bur-free cuts.
  • Feature 2X more teeth than standard cutting blades to cut through tough 304 stainless steel.
  • Special 2-step saw body design and unique laser slits reduce vibration, noise and increase stability. Ideal for cutting stainless steel plate, angle iron, pipe, all thread/rebar and more..
  • Max thickness of cut= 1/8".Please note that when cutting pipe or tubing, "max thickness of cut" refers to wall thickness, not overall diam..
Check Stock

Steel Dragon Tools® 50767 Model 258 Power Pipe Cutter, Pipe Cutting Machine for 2-1/2-Inches to 8-Inch Schedule 10/40 Steel Pipe

  • ...ade wheel and 6 Pcs high density ball bearing rollers clamps the pipe firmly during cutting, helping pipe cutter perform cutting for 5 to 50mm pipe with stability and precision, especially for metal & steel material, which frees you from the trouble of unfit pipe and uneven cutting surface because of instability.
  • 【Heavy Duty】 - Made of high density but lightweight aluminum alloy, copper pipe cutter is durable and compact. It won’t be broken after many times of cutting and it will last a long time. And aluminum alloy body makes metal pipe cutter more suitable for high density metal material cutting.
  • 【Clear Cutting】 - Tube cutter with 6pcs ball bearing rollers offers you a smooth cutting, improving cutting efficiency. Some small burrs are inevitable. So our steel pipe cutter comes with a deburring tool, which is made of sturdy plastic construction and high-speed steel blades. It can be used on both sides to perform inner diameter reaming and outer diameter grinding on the inner and outer sides of the incision to prevent scratches.
  • 【Ease Of Use】 - The bottom of the steel pipe cutter is equipped with a knob, which is comfortable to hold, can quickly adjust the tool, and provides a strong clamping force to ensure the stability of cutting. Just ....
Check Stock

AMZCNC Pipe Tube Bender 3/8″ to 1″, Manual Tube Bender with 7 Dies, Heavy Duty Tube Bender Tubing of Steel Metal Copper Ideal for Repair Shops

  • Installed on a solid workbench, the operation is simple and labor-saving. Equipped with 7 sets of 180° elbow dies The pipe bending effect is good, and the pipe is not easy to deform. Wide range of applications: various grades of U-bends, reverse bends, goosenecks and connecting bends The mold is made of ductile iron, with stable performance and durability..
  • Durable Material: The pipe bender is made of 40CR steel and 45# steel with rigorous craftsmanship. This product is in possess of great comprehensive performance, strength, and corrosion resistance . Great Capacity: The long handle bends pipe with its wall thickness stock up to 2.0mm.
  • Its Pipe Diameter Range :3/8“-1“(10mm-25)..
  • 7 Round Dies Size: 7 dies inside this bender that can be utilized for customizing brackets and supporting other parts on the working field. 3/8“,1/2”,9/16“,5/8”,3/4“,7/8”,1“. Wall Thickness of Pipe :0.03”-0.078”..
  • Ergonomic Handle: The long handle with rubber covered allows better leverage and operation, the extendable lever will increase the pressure you apply to the metal..
  • Compact & Portable: Compact design allows versatility, can make a variety of bends on square or solid round stock, light weight enough..
Check Stock

VEVOR Commercial Grease Interceptor 8 LB, Carbon Steel Grease Trap 4 GPM, Grease Interceptor Trap with Side Water Inlet, Under Sink Grease Trap for Restaurant Canteen Factory Home Kitchen

  • ...nt filter areas. The solid waste and grease will be stopped by the filter baffle firstly, and then the oil and filtered water will be discharged from the outlet valve and drainage outlet successively..
  • Coated Carbon Steel: Our 8 LB commercial grease trap is made of heavy-duty carbon steel, around 0.07 in (1.8 mm) in thickness, featuring durability and sturdiness. There is a rust & corrosion-proof coating on its exterior surface, which is easy to clean and hard to deform..
  • Reliable Sealing Effect: As a piece of rugged equipment for collecting and filtering the waste in the kitchen, this commercial grease interceptor spotlights the excellent sealing effect. The lid can be tightly fixed with a screw. The cushion layer is equipped for increasing friction and enhancing airtightness. Besides, a sealing ring and PTFE tape are also included in the package..
  • Ease Of Connecting: You can connect our commercial grease trap to your kitchen sink conveniently. Just link the grease inlet pipe to the higher inlet hole and the water outlet pipe to the lower outlet hole, then it will work properly. A piece of connecting pipe is provided, with which you can place it right below the drainage outlet of the sink. P.S. You need to prepare the grease inlet pipe and water draina....
Check Stock

Copper pipe cutter, aluminum pipe cutter, galvanized pipe cutter, stainless steel pipe cutter, cutting pipe diameter 4-28mm

  • The blade is made of 65Mn special steel, which can cut the pipe accurately and sharply..
  • It can cut copper pipe, titanium pipe, stainless steel and aluminum pipe..
  • The blade can keep rolling in the same circle when cutting..
  • [Cutting tube thickness] less than 1.5mm, blades can be replaced, high-quality blades have a longer service life.
Check Stock

DURATECH Inside Pipe Cutter with 2 Replaced Blades, for PVC and Plastic Pipe

  • Comes with 2 extra replaced blades. Heat-treated steel, 1.2mm blade thickness, black coating ensures durability. Sharp saw-tooth design for faster cutting..
  • Nickel-plated shaft can effectively prevent the product from corrosion. With high hardness, the tool ensures daily operation needs, and can cut up to 6mm thickness PVC pipe, plastic pipe..
  • Need to connect with power drill to use, and is easy to installation. Could be a great helper in cutting out drain stubs or repairing broken pipes..
  • TIPS: Before cutting in a pipe, please make sure the blade is locked tightly into the shaft. Otherwise, the inner pipe cutter may not exert its function well..
  • Caution: When the cutter is connected with a drill, it could be dangerous. Be aware of the sharp edge, and always wear protection to avoid hurting..
Check Stock

TOLESA Pipe Cutter Tool 3/16-2 Inch 5-50mm Heavy Duty Metal Pipe Cutter With Deburring Tool Pipe Reamer Sharp Copper Tube Cutter Speed Cutting Tubing Cutter For Stainless Steel Aluminum Brass Pipe

  • ...tal pipe cutter tool is equipped with sharp SKD cutter wheels and 6 high-density ball bearing rollers to ensure a firm grip on pipe during tube cutting process, especially for various metal, stainless steel, copper pipes and tubes. It saves you from the trouble of uneven cutting surface due to unstable clamping..
  • 【Heavy Duty】 - The copper pipe cutter is made of high-density but lightweight aluminum alloy, which is durable and compact. Copper tubing cutter can ensure your cutting work is smooth and will not break after many cuts, and has a longer service life. And the aluminum alloy body makes the conduit cutter more suitable for cutting high-density metal materials..
  • 【Clean Cutting】 - The stainless steel pipe cutter with 6 ball bearings provides you with smooth cutting and improved cutting efficiency. However, some small burrs on the edges are inevitable in the process of cutting tube. That's why our aluminum pipe cutter is equipped with a deburring tool pipe reamer, which consists of a sturdy plastic construction and a high-speed steel blade. It can ream the inside and outside of the cut to prevent scratching..
  • 【Ease Of Use】 - The bottom of the brass pipe cutter is equipped with a knob, which is comfortable to hold, can quickly adjust the c....
Check Stock

Custom Threaded Exhaust Adaptor Flange Kit Diy Generator Fits HONDA GX390

  • Heavy duty threaded exhaust flange kit for use on Honda GX390 engines. This is an un welded DIY kit so you can choose the length of the threaded pipe to work best for your application. Great for custom exhaust setups on generators, go karts, mini bikes, or garden equipment. Flange is CNC cut from heavy 1/4" steel plate to prevent warping, outlet pipe is 1" NPT pipe thread that matches exhaust port perfectly for maximum flow. Length of outlet pipe piece is 2.5"..
  • Comes complete with stainless steel mounting hardware for a quality installation..
Check Stock

Universal 3' 3Inch 76mm Aluminum Turbo Intercooler Piping U-Pipe Kit Silicone Hose Kit with Coupler and T-Clamps DIY Kit

  • ▲ Pipe OD: 3", aluminum pipe length: 23.62" / 60cm, thickness: 1.8mm.
  • ▲ Silver aluminum pipe: total lenth=24" or 600mm.
  • ▲ Silicone hose: Made of high quality Silicone, 3-Ply reinforcement.
  • ▲ T bolt clamp: Made of high quality 301 Stainless steel material.
  • ▲ Universal fitment, depending on the size of your Intercooler.
Check Stock