ReviewsHeavy duty Clamp Mount

Modkin Scope Rings, Rifle Scope Mount High Profile Scope Mounts for Picatinny Rail (1 inch, Set of 2)

Double scope ring mount for Picatinny/ Weaver Rail (21mm)..
Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
The ring is for most scopes which are in 1 inch / 25.4mm scope tube. High profile, 0.71 inch gap from base of mount to bottom of rings. ( Item height: 2 inch).
With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1 inch scope firmly, just twist off the nut and mount the base on the 21mm rail easily..

Check Stock

VIVO Dual Monitor Desk Mount, Heavy Duty Fully Adjustable Stand, Fits 2 LCD LED Screens up to 30 inches, White, STAND-V002W

Fits 13" to 30" Screens - Dual monitor mount fitting two screens 13” to 30” in size and up to 22 lbs in weight each with VESA 75x75mm or 100x100mm backside mounting holes. Cable management clips are provided along the arms and center pole..
Articulation & Height Adjustment - Adjustable arm offers +90° to -90° tilt, 180° swivel, 360° rotation, and height adjustment along the center pole. Monitors can be placed in portrait or landscape orientation..
Heavy Duty C-Clamp - Mounts to the back of your desk (up to 3.25” thick) via a heavy-duty C-clamp or optional grommet mount..
Easy Installation - Mounting your monitors is a simple process with detachable VESA bracket plates. We provide the hardware and easy-to-follow instructions for assembly..
We've Got You Covered - Sturdy steel design is backed with a 3 Year Manufacturer Warranty and friendly tech support to help with any questions or concerns..

Check Stock

Monstrum Picatinny Rail Mount for Savage Accu-Trigger Model Rifles | Savage 10/11/12/14/16/110 | Short Action | 0 MOA

Double scope ring mount for 11mm dovetail rail, specialized scope mount for Airgun/.22 Rails..
Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
Lightweight: 1.15oz per ring. High profile, 20mm/0.79in gap from base of mount to bottom of rings. ( Item height: 1.97'').
The ring is for most scopes which are in 1''/ 25.4mm scope tube..
With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. Precision and Repeatable Alignment..

Check Stock

EMART Photography Reflector Clamp Holder with 5/8' Attachment and 8.5 ft Stand Kit, Photo Video Studio Heavy Duty Metal Clamp Holder Light Stand Mount Bracket with Umbrella Reflector Holder

This product includes: [1x] Heavy Duty Metal Clamp Holder, [1x] 8.5'(260cm) Light Stand with 1/4" Screw Tip. Long service time and exceptional strength for heavy duty..
Heavy duty metal clamp holder can grip the large reflector due to its high load capacity. Super powerful metal clamp can 360°rotation and special designed for umbrella support..
Professional light stand made of aluminum alloy construction for durability, Adjustable from 2.9ft to 8.5ft, max load capacity:22lb, Standard light stand mount for use with any light head, 1/4" screw tip on the stem it supports all of photo equipment such as softbox, reflector, umbrella..
This is a product that can effectively reduce the workload for photographers who work alone and the bracket is equipped with 180 degree vertical adjustment lamp holder, which allows to adjust the angle of reflector..
Simple to use just attach the reflector to the stand via the reflector holder, perfect for positioning your reflectors or softbox, umbrella. Perfect for photo studio and on site photo and video shoots. Note: The reflector is NOT included..

Check Stock

Desk Mount Stand 2 Pack DSLR Camera Desk Mount C Clamp Light Stand 13.7 ~23.2 Photographic Light Boom Stand with 360° Ball Head for Camera Ring Light Video Light Video Conference Light

【Retractable Desk Mount Stand】 The minimum height is 13.7 inches and can be extended to 23.2 inches, with positioning screw, loosen the knob and....
【Multiple Angles】 The 1/4" ball head can ensure 360 degree horizontal rotating and from -90 degree to 90 degree tilting for panoramic photography....
【Upgraded table mounting clamp】 Compared with the old version, this tabletop mount clamp has a scratch-resistant pad and a wider mouth (up to 3.4....
【Heavy duty structure】 The clamp mount stand is made of sturdy and durable aluminum alloy and weighs 490 grams/1.08 pounds. Designed for....
【Package List & Warranty】 2*Ball Head, 2*Desk Mount Stand. 1-year warranty. (Please contact us if you encounter any, we will reply within 24....

Check Stock

BKL 1in. Dia x 3in. Long Cantilever with 1-5/8in. Clamping Length, Black (BKL-253-MB)

❖Heavy Duty:4 screw design with cut for weight reduction,weaver base mount with 2 top Slots Medium profile..
❖Fit to All 20mm Rail:Tactical mount ring Medium profile with spirit level,1‘’/24.5mm diameter fit most scope and tactical flashlight..
❖SeeThrough Design:See through design allow you to aim with the rifle's iron sight even with a scope installed..
❖Exquisite Workmanship:Precision machined from aircraft-grade aluminum alloy with anodized black matte finish..
❖Easy to Install:With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 20mm rail easily..

Check Stock

Unisky Bike Repair Stand Wall Mount Bicycle Maintenance Workstand Foldable Rack with Rotating Head

360 DEGREE ROTATING: With the quick-release handle and the turning button, the clamp head rotates in 360 degree, easy for you to reach every part of....
STEADY AND STABLE: This desk-mount repair stand is firmer and more stable than normal floor one. By stabilizing and mounting in surface, it can help....
DURABLE AND STRONG: The teeth and clamp of the bike repair stand are well made and heavy duty. The maximum weight capacity of the bike maintenance....
SUITABLE FOR ANY FLAT SURFACE: You can mount this bike repair stand to any flat surface. Then dealing with bicycle maintenance works becomes....
SIZE INFO: The total height is about 23.62”, from the bottom to the upper part of the clamp. The width is about 19.69”, from the front part of....

Check Stock

ZealSound Microphone Arm Stand h1 13 inch + h19 19 inch Black

...s adjustable gooseneck arm rotates freely on the table clamp, to ensure microphone is pointed in an ideal direction. Arm bends back and forth all-round from 0 to 360 degree at the base, movement is solid and smooth..
【Sturdy and Solid Build】0.48'' thick & 13" long stainless steel aluminum alloy gooseneck and the heavy duty metal base ensures your microphone stays firmly in place. Flexible enough to twist yet durable enough to withstand repeatedly bend. Considerate soft cushion of the table clamp can protect your furniture from scratch..
【Easy to Mount and Carry】The super flexible Microphone snake clamp stand is ideal for mounting your microphone anywhere you need it - desk, podium, pulpit, coffee tables, announcers' table, etc. Roll it up easily to save space, and carry freely when traveling and on a business trip. Perfect for recording and live stream on the go..
【Various Using Occasions】 Microphone clip holder, with Heavy Duty table clamp open maximum to 2.4.

Check Stock

ZealSound Microphone Arm Stand h1 Black + h1s Silver 13 inch

...s adjustable gooseneck arm rotates freely on the table clamp, to ensure microphone is pointed in an ideal direction. Arm bends back and forth all-round from 0 to 360 degree at the base, movement is solid and smooth..
【Sturdy and Solid Build】0.48'' thick & 13" long stainless steel aluminum alloy gooseneck and the heavy duty metal base ensures your microphone stays firmly in place. Flexible enough to twist yet durable enough to withstand repeatedly bend. Considerate soft cushion of the table clamp can protect your furniture from scratch..
【Easy to Mount and Carry】The super flexible Microphone snake clamp stand is ideal for mounting your microphone anywhere you need it - desk, podium, pulpit, coffee tables, announcers' table, etc. Roll it up easily to save space, and carry freely when traveling and on a business trip. Perfect for recording and live stream on the go..
【Various Using Occasions】 Microphone clip holder, with Heavy Duty table clamp open maximum to 2.4.

Check Stock

Modkin 11mm Dovetail Scope Mounts for 1'' Scope Tube High Profile for Airguns or Premium .22 Rifles (Set of 2)

Double scope ring mount for 11mm dovetail rail, specialized scope mount for Airgun/.22 Rails..
Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
Lightweight: 1.15oz per ring. High profile, 20mm/0.79in gap from base of mount to bottom of rings. ( Item height: 1.97'').
The ring is for most scopes which are in 1''/ 25.4mm scope tube..
With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. Precision and Repeatable Alignment..

Check Stock

[New Generation] Highway Pegs Footpegs Foot Rest Fit for Touring Street Glide Road Glide Road King Electra Glide with 1.25 inch Engine Guard 1 1/4 Highway Bar (Black)

[Material]:Made of heavy duty billet aluminum,strong and durable,and prime quality rubber not easy to came off.
[New Generation]:①New generation mount clamp ,firm grip the engine guard ②Oversized footpegs,provide more comfortable place for foot ③Short arm designed for many multi-fit applications especially for tall riders.
[Multi-Angles Adjustable]:The foot pedal and mount clamp is 360 adjustable,you can adjust comfortable angle and position.
[Fitment]:Fit for Harley Touring Road King Street Glide Road Glide Electra Glide with 1 1/4 inch highway bar.
Universally fit on 1 1/4" engine guards or tubing.
requires 1 1/4" of straight engine guard tube for clamp mounting (Please check your model and engine guard size,if your engine guard diatemeter is not 1 1/4 inch,they will not fit).
[Package]:1 pair highway pegs +Mount clamp kit(As the picture show).

Check Stock