ReviewsHeavy duty Puller Tool

Tiger Tool Yoke Puller for Commercial Trucks, Heavy Duty Yoke Removal Tool Kit, Semi Truck Yoke Remover Tool, Works on Class 6-8 Trucks and Equipment, 10803

  • The Tiger Tool Commercial Yoke Puller simplifies and expedites the removal of commercial heavy duty yokes on driveshafts, transmissions and rear-end differentials without damage to yokes or other components..
  • Application: Commonly found on class 6-8 transportation trucks and equipment. (for use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.). Yokes with a bearing diameter between 1 7/8” and 2 3/16”. Spicer and Meritor 1610, 1710, 1760, 1810 Series. Spicer SPL 140, 170, 250 Series. Meritor/Rockwell RPL 20, 25 Series..
  • The Tiger Tool 10803 is manufactured from high-grade steel for strength and durability. This yoke removal tool is engineered for use with a 1 inch impact tool and is capable of generating over 25,000 pounds of pulling power..
  • When it comes to quality, no detail is too small. To prolong the life of the forcing screw, the pull bar is precisely milled with a chamfer. The caps are designed with flexibility in mind to service an extensive range of class 6-8 trucks. Tackle more jobs with fewer parts using the 10803..
  • The Tiger Tool Heavy Duty Commercial Yoke Puller Tool Set is proudly made in North America to ensure you have what it takes to get the job done right..
Check Stock

Yoursme Injection Pump Gear Puller Removal Installer Tool & Engine Barring/Rotating Tool for Cummins and Dodge Engines

  • APPLICATION: Injection Pump Gear Puller works on Cummins Engines Dodge Ram Bosch VE P7100 VP44 4BT 6BT. Engine Barring/Rotating Tool works on Cummins B/C Series and Dodge Pickups 3.9L, 5.9L, 6.7L & 8.3L Diesels Engines..
  • SUPER MATERIOR: Made from high standard 42CrMo steel with Black Finish, resisting rust and impact, Great Strength and Durability, ensures reliable long-term service..
  • USE INSTRUCTION： Injection Pump Gear Puller--Used to remove the injection pump gear with ease and fast. Engine Barring/Rotating Tool--Just insert the tool into the flywheel housing until it engages the ring gear, then attach a 1/2" square drive ratchet or breaker bar and turn..
  • PACKAGE INCLUDE: 1PC Injection Pump Gear Puller with two heavy duty flange bolts.
  • Satisfaction Guarantee: Yoursme aims to provide the best service for our customer, if you're not 100% satisfied with our item, simply return it for a full refund in 30 days. We support 12 months’ Warranty. If you have any problems about our products, please feel free to contact us..
Check Stock

BISupply T Post Puller Fence Post Puller - Wood Fence Post Puller 36in T Post Remover and Tree Stump Remover for Yards

  • [Yard Work Made Easy]: BISupply Steel T Fence Posts Remover is the perfect tool to help remove T-posts, wooden fence posts, cement plugs, or small tree stumps.
  • Set up a new fence or clear up old trees from your yard with ease.
  • [Save Your Energy]: 36-inch (91.4cm) stump puller applies maximum leverage for the user to conserve strength and make the workload minimal.
  • Maximum weight capacity of up to 1,764 pounds (800kg).
  • [Easy to Use]: Stand T post fence tool upright with handle near waist height.
  • Put tree stump remover lock around stud and push the handle down to pull post upward.
  • Repeat this process by raising tree puller handle back up and fitting around lower stud.
  • [Built to Last]: T-post frame puller is made of heavy-duty steel with a 5-inch (12.7cm) base to provide sturdiness and convenient storage.
  • Powder-coating on stake puller helps prevent wear.
  • [Works in Various Situations]: Use 4x4 post puller for more than just fence posts and tree stumps.
  • 4x4 wood post remover can be used in farming, mining, boating, and construction.
Check Stock

EWK Camshaft Sprocket Pulley Puller Removal Tool Kit for VW Audi V6 V8 T40001

  • 【 Specialty Tool 】This puller is designed to pull off the camshaft sprocket. Can be lock on gear with 5 or 6 spokes. The length of puller arm are 17mm and 23mm Hex head 17mm pressure screw with rounded end for reducing damage to sprocket..
  • 【 Must Have 】Cam sprocket puller is the essential tool when replacing the timing belt on the Audi V-6 and V-8 engines. Dismantle camshaft sprockets safely with uniform pressure Replaces OEM part number T40001..
  • 【 Heavy Duty 】This puller kit bears high pressure and can deal with stubborn cams. Easily takes off tough cam sprockets that hard to loose without deforming, bending or spreading. Placed in a sturdy blow molded case makes storage and transportation more convenient and organized..
  • 【 Wide Applications 】 Widely suitable for Audi: 80, 100, A4, A6, S6, A8, S8, RS4, RS6.
  • Volkswagen: V6 2.4, 2.6, 2.7, 2.8 Petrol, V8 3.7, 4.2 Petrol.
  • Skoda: Superb. Please refer to the owner’s manual before using..
  • 【 EWK Assurance】Excellent WorKing experience guaranteed! EWK provides you premium quality tools and the best service with 12 month....
Check Stock

8MILELAKE Rear Axle Bearing Puller Extractor Installer Set Axle Bearing Removal Remover Tool Kit

  • [APPLICATION]: This rear axle bearing puller can help to pull out semi-floating rear axle bearings quickly and effectively..
  • [EASY TO USE]: The washer of the axle bearing puller can captures the bearing firmly to distribute the force to the whole bearing, can avoid damage of the bearings and case..
  • [DURABLE MATERIAL]: The rear axle bearing removal tool is constructed from heavy duty cast steel, which has good strength and durability, can provide long service life..
  • [SIZE]: The bearing puller remover set includes fittings for main bearing tube: Small: 1" to 1-7/8.
Check Stock

TBVECHI 5 Ton Heavy Duty Power Puller with 3 Hooks 2 Gears Automotive Hoist Cable Puller

  • 【5 Ton Heavy Duty Power Puller】5 Ton Heavy Duty Power Puller with 3 Hooks 2 Gears Automotive Hoist Cable Puller..
  • 【Description】New And Ioproved Larger Handle For Extra Leverage. Thick Body Frame, heavy Duty Cable With Strong Alloy Hooks..
  • 【Features】3-Hook Design, come Along With Heavy Duty Solid Metal Gear.Strong Drop Forged Steel Slip Hooks..
  • 【Useful】For Use In Versatile Applications, Construction, Automotive Farm Ranch, Work Shop, Home..
  • 【Guaranteed】This item will ship from USA, delivery time need about 5-8 days. If there is any questions please feel free to contact with us, our....
Check Stock

VCT Rear Axle Bearing Remover Puller Slide Hammer Set Remove Semi-Floating

  • EASY TO USE: Slide flat end of puller through center of bearing and flat against backside of bearing, then slide washer down the center of the shaft against front side of bearing and tighten the nut on smaller end of puller, then thread a slide hammer (not included) to the puller and slide hammer back and forth until the bearing comes out.
  • The washer captures the bearing firmly to distribute the applied force over the entire bearing and prevent damage.
  • Use the VCT Pneumatic SAE Standard Rear Axle Bearing Puller 3-Piece Service Set – Domestic Car Vehicle Bearings Removal Tool Kit to service semi-floating rear axle bearings on your vehicle.
  • These tools make the job simple and prevent damage to your bearings when pulling.
  • Much easier than claw-type axle bearing pullers that slip off and chew up the old bearings.
  • For removal only, not intended for installation.
  • FITS YOUR CAR: Standard SAE sizes work for most American domestic makes and models.
  • Set includes the following sizes to fit main bearing tube – 1 inch to 1-7/8 inches, 1-5/16 inches to 2-3/8 inches, and 1-3/8 inches to 2-7/8 inches.
  • Sizes permanently laser-etched on tool for easy identification.
  • Each tool fits a basic slide hammer with a 5/8-inch x 18 thread pitch.
Check Stock

VEVOR Hydraulic Gear Puller 15 Ton Max Capacity Hydraulic Puller 2 or 3 Jaws Bearing Hub Separator 3.9 - 11.8 Hydraulic Puller Separator Tool for Pulling Hubs Flanges Gears Bearings

  • Durable Material: The hydraulic gear puller is made of heavy-duty forged steel, featuring superior strength and no oil leakage. It's very sturdy and possesses 15T (33069 lbs) maximum capacity and a long service time..
  • Adjustable Jaws: You can install two or three jaws and adjust the height as needed. Besides, the pump head of the hydraulic bearing puller can rotate 360 degrees, which is easy for you to operate and use the tool..
  • Bidirectional Operation: The 15-ton hydraulic gear puller can be operated horizontally or vertically without site restriction. It has 2" (50 mm) axis travel with 7" (180 mm) max reach and 12" (300 mm) max spread..
  • Humanized Design: Equipped with a security relief valve, the piston rod, the detachable ejector pin, and the movable handle, the hydraulic steering wheel puller has the advantage of compact structure and working agility..
  • Diverse Scenario: A hydraulic puller set is an ideal tool for pulling hubs, flanges, gears, pulleys, flywheels, bearings chucks from shafts. It is widely suitable for car maintenance factories, mechanical factories, and repair workshops, etc..
Check Stock

OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

ABN Automotive Car Steering Wheel Puller Compressor Remover Set – Vehicle Steering Wheel Lock Plate Removal Tool Kit

  • EFFORTLESSLY REMOVE STEERING WHEELS: Use the ABN | Steering Wheel Removal Tool Set to apply equal pressure so you can safely remove steering wheels.
  • This universal steering wheel puller tool kit includes a steering lock plate remover in order to remove and replace the bearing in the steering column.
  • VARIOUS APPLICATIONS: For most American domestic and import cars and light trucks.
  • Remove steering wheels with or without a telescoping tilt or tilt steering columns (first remove the horn cover plate and the steering wheel nut when applicable).
  • Compresses locking plate spring to allow removal of retaining clip.
  • Allows access to turn signal switch and SIR modules on current GM vehicles.
  • Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs.
  • BUILT TO LAST: When used properly, this steering wheel puller kit will not cause any bending or spreading.
  • Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion.
  • We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate.
  • EASY STORAGE: Heavy-duty 12.6” x 2.25”....
Check Stock