ReviewsHeavy duty Solid Pilot Counterbore

Ground Anchor Kit, Set of 8 Earth Augers, Drill Ready, 15' Long, 3' Wide Helix, 3/8' Diameter Stake Shaft, Spiral Ground Stakes With Removable Ring

  • ..., travel trailers, cabins, chicken coops, garages and small buildings. Works great with trampolines, playground playsets, kid's swing sets, slides, deer stands, canopies, temporary shelters, campers, fencing and fence posts, trees, vertical hammock stands, and more!.
  • PREMIUM QUALITY: Eight large 15 inch (38 cm) long heavy duty anchors. 3/8 inch (9.5 mm) diameter solid steel shaft with 3 inch wide helixes for maximum holding power. 360 degree welds between spiral helix and shaft offer fortified, durable pilot ends to plant into the dirt. Industrial strength hardware to fasten your biggest loads..
  • USER FRIENDLY: Sharp edged tips yields easy penetration into the land. Included metal torque bar, when placed through the eyelet at the end of the auger shaft, provides ample leverage to drive down the anchors into the soil without having to over exert oneself or use a drill..
  • ACCESSORIES: Includes rubber edge guards for anchor pilot ends permits storing safely..
  • 1-year warranty – We are so confident you’ll love the products that we give a 1-year warranty on the purchase. If, for some reason you are not happy with your order, reach out to us and we will gladly assist you..
Check Stock

Countertop Gas Charcoal Broiler Charbroiler - 18

  • 30,000 BTU U-style burners every 12" of width.
  • Heavy-duty cast iron grates can be individually positioned flat or slanted.
  • Grates are reversible with thin & thick side.
  • Heavy-gauge stainless steel radiants contoured for even heat distribution.
Check Stock

Powerbuilt Pilot Bearing Puller, Remove Bearings and Bushings, Foreign and Domestic Car Repair, Storage Case - 648619

  • Made to be the most reliable tools in the market today.
  • Tool set for removal of the pilot bearing and bushings from the flywheel during clutch replacement.
  • Heavy duty puller with 1 1/2-Inch fingers for an extra deep reach.
  • Kit 8 includes 1-Piece for removal of pilot bearing and bushings from the flywheel during clutch replacement.
Check Stock

Klein Tools 31852 Heavy Duty Hole Cutter, 7/8-Inch Carbide Hole Cutter Cuts Stainless Steel, Mild Steel, Iron, Copper, Brass

  • Heavy duty, durable carbide hole cutters for long life.
  • Cuts quick, precise holes in stainless steel, mild steel, iron, copper, and brass sheet up to 3/16-Inch (0.5 cm) thick.
  • Split point pilot drill bit prevents bit walking.
  • Integrated flange prevents the operator from drilling beyond the sheet metal.
  • Conduit and pipe sizes: 1/2-Inch (1.3 cm).
Check Stock

Majestic Quartz Series Direct Vent Gas Fireplace with Intellifire Ignition (42N)

  • ✅ Direct Vent Gas Fireplace - Gas appliance directly vents outdoors to provide a fuel efficient heat supply..
  • ✅ Phazeramic Gas Burner - 15,000 BTU pan-style burner with unique design features a varied flame pattern for a realistic look..
  • ✅ PHAZER Log Set - Light weight and molded log set enhances the realistic appeal of the fireplace..
  • ✅ Cast Iron Construction - Heavy duty construction ensures long term durability and quality..
  • ✅ Clean Face/Builder Design - Shallow depth with clean face design offers a seamless installation..
  • ✅ Electronic Gas Valve - IPI (Intermittent Pilot Ignition) gas valve allows electronic control of the pilot light to save on fuel cost.
Check Stock

Klein Tools 31873 Heavy Duty Hole Cutter Kit Includes Carbide Hole Cutters and 2 Pilot Bits in Rust-Proof Molded Plastic Case 8-Piece

  • Heavy duty, durable carbide hole cutters for long life.
  • Cuts quick, precise holes in stainless steel, mild steel, iron, copper and brass sheet up to 3/16-Inch (0.5 cm) thick.
  • Set contains: 7/8-Inch, 1-1/8-Inch, 1-3/8-Inch, 1-3/4-Inch, 2-Inch, 2-1/2-Inch, two extra pilot bits.
  • Split point pilot drill bit prevents bit walking.
  • Integrated flange prevents the operator from drilling beyond the sheet metal.
Check Stock

Empire Boulevard SL Vent-Free Linear Fireplace, IP with Wall Switch, 14,000 Btu (VFSL30FP70N)

  • Heavy Duty Construction - For excellent durability and longevity.
  • Contemporary Style - Sharp lines and linear burner bring elegance to your living space.
  • Vent-Free Fireplace - Energy efficient, can be placed in homes where venting isn't possible.
  • Oxygen Depletion Sensor - Continuously monitors oxygen/CO2 levels to maintain a safe environment.
  • Includes - Non-combustible board for recessed installation, an on/off switch with a 10-foot wire, a battery backup with a 10-foot wire and a fine mesh barrier screen.
Check Stock

Sabre Tools 5/16 Inch Cobalt Drill Bits – 5pcs Drill Bits for Metal, M35 Cobalt Metal Drill Bit Set, Pilot Point Tip – Heavy-Duty Drill Bits for Steel, Hard Metal, Cast Iron (5/16" x 4-1/2")

  • What You Get: This drill bit set for metal includes 5 – 5/16 Inch x 4-1/2 Inch bits of the same size..
  • A Must in Your Tool Box: This cobalt drill bit set is designed to surpass your expectations in terms of durability and performance, ensuring fast and easy penetration through hard metals..
  • Heavy-Duty Material: Our drill bits for hardened steel feature a heavy-duty construction made with M35 cobalt, which has excellent durability and superior resistance against abrasion and high heat..
  • Pilot Point Tip: These cobalt drill bits feature a pilot point tip that prevents slipping and can help increase drilling speed while ensuring smooth and easy penetration through hard metals..
  • Wide Range of Applications: Our cobalt drill bits for hardened steel are suitable for hard metals, stainless steel, cast iron, steel, titanium alloy, hard plastics and more, and a wide range of applications such as repair, construction, or woodworking..
Check Stock

DEWALT Drill Bit, #10 Countersink, 3/16-Inch (DW2539)

  • Drill, countersink and counterbore in one step with this drill bit.
  • Four-cutter countersink and tapered drill bits for wood, metal and plastic provide superior speed and ideal finish.
  • Replacement tapered bits offered for DEWALT drill bits.
  • Drill, countersink and counterbore in one step.
  • Four-cutter countersink and tapered drill bit provide superior speed and ideal finish.
Check Stock

Accusize Industrial Tools H.S.S Solid Cap Screw Counterbore Set 3 Flute Straight Shank 7 Pc 508S-0007

  • Inch Set (7 PC) : 6#, 8#, 10#, 1/4'', 5/16'', 3/8'', 1/2''.
  • Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
  • Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
  • Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..
Check Stock

Accusize Industrial Tools 7 Pc Metric Hss Solid Capscrew Counterbore Set 3 Flute Straight Shank 508S-007m

  • Metric Set (7PC): M3, M4, M5, M6, M8, M10, M12. 3 Flute..
  • Cap screw counterbores are tools that are used to create a recess in a workpiece for the head of a cap screw. You might use a cap screw counterbore when you need to attach a component to your workpiece using cap screws, and the component has a thickness that is greater than the length of the cap screw..
  • Another reason you might use a cap screw counterbore is if you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece. A cap screw counterbore allows you to create a recess in the workpiece that is sized to fit the head of the cap screw, giving the screw a flush or countersunk appearance..
  • Overall, cap screw counterbores can be useful when you need to attach components to a workpiece using cap screws, or when you want to create a flush or countersunk appearance for the heads of the cap screws on your workpiece..
Check Stock