ReviewsHeavy duty Structural Bolt Kit

TooTaci 1000lb Capacity Hammock Hanging kit,Hammock Hooks Heavy Duty with Screw Bolts,Stainless Steel Hammock Wall Hooks for Wall/Ceiling Mount,for Indoor Outdoor Hammock Chair Hanging/Swing Hanging

  • ...ock Wall Hanging Kit comes with 2pcs hammock hooks,M8 pad eye plate (L×W:80× 50mm/diameter:8mm), 8pcs stainless steel screws and 8pcs wall anchor bolt,The drill bit you will need 8mm..
  • Hammock Wall Mount Kit can fixing to concrete wall mount ,wooden buildings, brick wall,timber,etc.
  • indoor outdoor hammock hooks heavy duty and supplied fixings,attached the plates to brick wall ,no matter vertical or horizontal ceiling for swing.
  • Swing Hanging Kit made of the 304 stainless steel. And we also have upgrade the screws to 304 stainless steel now ,stronger than before,suitable for mounting to solid walls, eeilings, floors, decks, trees etc,heavy duty hammock hooks can provide stronger support for hanging tasks..
  • Hammock Hooks heavy duty for wall,supports 1000lbs when properly attached (500lbs per one pad eye).
  • Indoor hammock hanging kit perfect for kid's swing chairs for your baby, strong and easy to installation..
  • Hammock Wall Hooks is a is a perfect DIY hanging accessory for heavy duty tasks, it's easy to install by yourself anywhere.
  • perfect for yoga trapeze ceiling hooks,indoor hammock hanging,swing hanging hardware, enjoy a relax time in your home anywhere.
  • hammock hooks also can use for on garage walls and provide good supports to hanging ta....
Check Stock

1/2 x 6” 25-Piece Black Lag Bolts Rustproof 4-Layer Ceramic BLAKOTE 2X Protection of Galvanized Lag Screws for Decks Pergolas by Makers Bolt

  • Secure Exterior Structural Wood - Ideal for deck wood, exterior plywood, and other marine grade plywoods, our heavy-duty lag screws make wood-to-wood fastening a breeze. Each pack comes with 25pcs of ½” diameter hex screws..
  • 2x Corrosion Protection - These lag bolts for wood are made of an exterior grade 4-layer black ceramic coating called Blakote. With twice the protection of standard galvanized wood screws, they won’t tarnish after exposure to highly corrosive environments..
  • Better for Outdoor Applications - Our structural screws have a black matte finish. They’re tougher for outdoor wood projects than our black oxide finish..
  • Comes in Different Lengths - Use these construction wood screws on decks, gazebos, trusses, and other wood connections. Our lag bolts are available in 1/2" diameter and in lengths up to 8”..
  • Uniform Heads and Precise Threading - Makers Bolt screw sets are specially manufactured under tight tolerance, ensuring precision and uniformity in production..
Check Stock

HYXXYY Stainless Steel Eye Bolt, 4pack M8 Shoulder Eye Bolts 5/16\ X 4\with Nuts and Washer Thread Lifting Ring Eyebolt, Long

  • Ring Bolt Features: The heavy duty eye bolts 4” with strong support, the lock nuts providing better security and firm hold, the washers included can prevent loosening.
  • Dimension: This M8 Eye Bolt rod total length 135mm/5.3inches, thread outer diameter is 8mm/0.31inch, thread length 100mm/4inches, ring inner diameter 20mm/0.78inch.
  • High Quality Material: The stainless shoulder eye bolt is made of high grade 304 stainless steel, The surface of the thread is smooth, the force is even, it is not easy to damage, and it is durable, This stainless eye bolt is made of super large machine, which offers good corrosion resistance in any environment, have superior rust resistance and the excellent of oxidation resistance.
  • Perfect Kit: These M8 shoulder eye bolts are formed and welded for a heavy duty anchor point, Often used to attach wire rope or other rigging hardware to a surface or object, suitable for homes, offices, hotels and other places, play the role of attachments and suspension.
  • Package includes: 4 x shoulder eye bolts, 4 x nuts, 4 x washers, if you are not satisfied with the product, you can always send us an email to us, provide you with satisfactory service in the first time.
Check Stock

Shoulder Eye Bolts, Heavy Duty Eyebolts 304 Stainless Steel Wall Concrete Anchors Screw Expansion Bolts with Nuts Eye Hooks Fastener for Ceiling Concrete Masonry

  • Dimension: This M10 Eye Bolt rod total length 85mm/3.35inches, thread outer diameter is 10mm/0.39inch, thread length 50mm/2inches, ring inner diameter 25mm/0.98inch.
  • Ring Bolt Features: The heavy duty eye bolts 4¡± with strong support, the lock nuts providing better security and firm hold, the washers included can prevent loosening.
  • Perfect Kit: These M8 shoulder eye bolts are formed and welded for a heavy duty anchor point, Often used to attach wire rope or other rigging hardware to a surface or object, suitable for homes, offices, hotels and other places, play the role of attachments and suspension.
  • High Quality Material: The stainless shoulder eye bolt is made of high grade 304 stainless steel, The surface of the thread is smooth, the force is even, it is not easy to damage, and it is durable, This stainless eye bolt is made of super large machine, which offers good corrosion resistance in any environment, have superior rust resistance and the excellent of oxidation resistance.
  • Package includes: 2 x shoulder eye bolts, 2 x nuts, 2 x washers, if you are not satisfied with the product, you can always send us an email to us, provide you with satisfactory service in the first time.
Check Stock

Raceline Wheels 991B ASSAULT Wheel Black 17X9 6X135 Bolt Pattern +25mm Offset/ 6 B/S 8 Spoke Aluminum Passenger Car Wheels Full Size Replacement Black Car Rims

  • RACELINE ASSAULT WHEELS: Contemporary 8 spoke design with smooth deep lip feature constructed out of heavy duty A356 aluminum..
  • MILLED LIP: Milled lip adds to wheel design contrast. Raceline automotive wheels pass or exceed all DOT standard load ratings..
  • AVAILABLE IN 2 COLORS: Available in both Satin Black and Chrome finish and also available in 16” to 20” diameters. Hub centric fitments available....
  • BOLT ON CAP: Bolt on cap with contrasting embossed Raceline logo. Includes a Lifetime Structural Warranty (limitations may apply), The Official Wheel....
  • RACELINE: Raceline is a market leader in the design and manufacturing of wheels for off-road, street and track use. Founded more than 20 years ago as....
Check Stock

ABN Brake Tool Sets w/ 18 Pc Disc Brake Caliper Tool Kit & 8 Pc Drum Brake Tool Kit – Removal and Installation Tools

  • ...n and broken brake parts such as bearings, seals, axles, shoes, pistons, springs, pads, calipers, and rotors.
  • Rear brake caliper tools are designed to be used on most foreign and domestic cars and trucks.
  • BRAKE CALIPER WIND BACK TOOL SET: Each piece of the 18-piece brake caliper compressor tool set is constructed of heavy-duty metal for durability and longevity.
  • This set includes a left-handed and right-handed thrust bolt and 15 disc adaptors that are compatible with a wide range of vehicles.
  • All parts in this brake piston compressor tool set are designed to prevent damaging pistons and seals.
  • DRUM BRAKE TOOLS: This 8-piece professional grade brake set includes 3 varying sizes of brake spoons to easily adjust most brake drums and 5 varying brake spring tools to service these drum brakes.
  • Constructed of heavy-duty metal and ergonomic plastic handles, the brake piston compression tool set provides you with the perfect grip and durability for your project.
  • EASY STORAGE: Heavy-duty 14 x 3 x 12.3-inch (35.5 x 7.6 x 31.2 cm) plastic blow-molded carrying case with latches and handle protects these brake kits for easy transportation, safe storage, and quick organization.
  • CONTENTS: Brake caliper kit includes a holding plate, right and left-hand thrust bolt, a 3/8....
Check Stock

Xth-Nth Wall Anchor Setting Tool for Molly Bolts, Wall Anchor Fixing Gun Metal Setting Tool for Hollow Wall Cavity Anchor Plasterboard Fixing with 32 Pieces Molly Bolt

  • ✅【MATERIAL】The anchor gun is made of heavy duty solid metal with non-slip rubber grips. Molly bolts are made of high quality zinc plated carbon steel with high hardness, wear resistance and rust resistance..
  • ✅【WHAT YOU GET】This assortment kit includes 1pc anchor setting tool and 5 sizes molly bolt for you to deal with multiple different drywall. It includes M4x32mm(4pcs), M4x60mm(4pcs), M5x52mm(4pcs), M5x65mm(4pcs), 6x52mm(2pcs), total 18pcs with 1pc anchor gun..
  • ✅【EASY TO USE】The heavy duty gun is used to accurately and quickly set the hollow wall fixing parts into the hollow wall. The molly bolt will expand during installation, which provides strong load-bearing capacity and safety..
  • ✅【NEATLY PACKING FOR EASY SELECTION】The assortment kit comes with a convenient case. Clear plastic case makes it easy to find correct anchors quickly, saves your time of running around looking for a particular size anchor..
  • ✅【WIDE APPLICATION】Works well on concrete walls, drywall surfaces, brick walls, sheetrock, plaster and wood. Great for hanging small pictures , heavy paintings, mirrors, clock, picture frames, towel rack and lightings..
Check Stock

ECOTRIC 1/2\ 3/8\ Thick Steel Quick Tach Attachment Mount Plate Skid Steer Adapter Bobcat. with One Year Warranty (3/8\)

  • 【Description】 ECOTRIC thick mount plate can easily weld or bolt onto plows, forks, or any attachment that you want to convert to quick tach hookup. Fits skid steers with the universal quick tach mounting system and tractors with the skid steer style quick tach..
  • 【Features】 *One Year Warranty! *Ease to weld Made from Grade 50 structural steel *Condition: 100% Brand New *Material: Heavy Duty Steel.
  • 【3/8" Specifications】 Weight: 53 lbs ,Outside width: 46" Inside width: 45" ,Height: 18.5" ,Top bar: 3/8" thick, Plate: 3/8" thick.
  • 【1/2" Specifications】 Weight: 68 lbs,Outside width: 46.
Check Stock

CURT 48600 Raw Steel Pintle Hitch Lunette Ring 3-Inch ID, 12,000 lbs, Channel Mount Required

  • HEAVY-DUTY TOWING. This lunette ring provides a heavy-duty towing connection between your truck and trailer. It securely couples to a pintle hitch or clevis bar and is commonly used for construction, agriculture and military applications.
  • RELIABLE STRENGTH. For maximum confidence on the job, this lunette ring is rated to tow 12,000 lbs. gross trailer weight (limited to lowest-rated towing component).
  • VERSATILE FIT. This lunette ring hitch features an inside diameter of 3 inches to fit a wide variety of pintle hitch options. It can be coupled to most pintle hooks and ball and pintle hitch combinations (sold separately).
  • SECURE INSTALL. This pintle hitch lunette ring is designed to mount onto a CURT lunette ring channel with the bolt kit #48620 (2-inch bolt pattern, sold separately). A channel mount also allows for flexible height adjustment.
  • TOUGH BUILD. This lunette ring is constructed from solid forged steel for superior strength. It comes with a raw steel finish for ready painting as needed.
Check Stock

CURT 48660 Raw Steel Pintle Hitch Lunette Ring 3-Inch ID, 24,000 lbs, Channel Mount Required

  • HEAVY-DUTY TOWING. This lunette ring provides a heavy-duty towing connection between your truck and trailer. It securely couples to a pintle hitch or clevis bar and is commonly used for construction, agriculture and military applications.
  • RELIABLE STRENGTH. For maximum confidence on the job, this lunette ring is rated to tow 24,000 lbs. gross trailer weight (limited to lowest-rated towing component).
  • VERSATILE FIT. This lunette ring hitch features an inside diameter of 3 inches to fit a wide variety of pintle hitch options. It can be coupled to most pintle hooks and ball and pintle hitch combinations (sold separately).
  • SECURE INSTALL. For a solid installation, this pintle hitch lunette ring is designed to mount onto a CURT lunette ring channel with the bolt kit #48620 (2-inch bolt pattern, sold separately). A channel mount also allows for flexible height adjustment.
  • TOUGH BUILD. This lunette ring is constructed from solid forged steel for superior strength. It comes with a raw steel finish for ready painting as needed.
Check Stock

UNIGT 38642 Tailgate Hinge Insert Kit and 38427 Tailgate Striker Bolt Compatible with 1999-2006 Chevy Silverado/GMC Sierra - Combo Package Set

  • Tailgate Hinge Insert Kit is made with heavy-duty steel, designed to restore proper tailgate alignment and function for 99-06 Silverado and Sierra.
  • Tailgate hinge insert Kit direct replace part number - 15074252, 15074253, 15078745, 15078746.
  • Tailgate Striker Bolt is designed to replace old or worn-out strikers, fix a tailgate to prevent that always making a wobbly/squeaky noise or keep falling down.
  • Tailgate Striker Bolt direct replace part number - 11570162.
  • Package Includes: 4 tailgate hinges - 2 body mount (left/right) and 2 tailgate mount (left/right), 2 striker bolts with nuts and plastic bushing.
Check Stock