ReviewsHeavy duty Tap And Drill

2 Ball Caster Wheels casters Set of 4 Brass Vintage Antique casters 5/16 x 1 1/2 8 x 38mm Wheels Pole with Sleeve for Furniture Chairs Cabinets （casters Set of 4 Heavy Duty）

  • ✔️ 【High carrying capacity】The material of the sphere is made of PP material, which has good heat resistance, insulation and corrosion resistance. The wheel cover is made of heavy-duty steel structure, (including 4 installation sockets), which greatly improves the bearing capacity of the wheels for furniture, up to (500LBS), the overall hardness is uniform, and the friction is good, which greatly prolongs the use of the chair casters..
  • ✔️【Wide Application】The industrial casters is suitable for a variety of applications, whether it is indoors or outdoors, it works well. Including but not limited to: cabinets, coffee tables, plant stands, shoe boxes, sewing chairs and other equipment. Please confirm size before purchase (caster 5/16" x 1 1/2" (8 x 38mm), suitable for 3/8" hole, (direct insertion mounting hole) but not suitable for 3/8" socket. Included Socket of 9.1x31mm/0.36x1.2"(D*H).
  • ✔️【Easy Installation】The caster wheels heavy duty are also very convenient to install. If there are existing mounting holes, just pull out the old one and insert the new one. If there are no mounting holes, you need to drill holes (23/64"), tap the sockets into the drilled mounting holes, and finally tap the caster into the sockets. Installation is....
Check Stock

AUTOTOOLHOME Titanium Combination Drill Tap Bit Set 13PCS SAE and Metric Tap Bits Kit for Screw Thread Drilling Tapping Deburring Countersinking

  • Titanium Combination Drill tap bits are made of high speed steel 4341, which can ensure sharp, fast execution and retain strength and efficiency. The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life..
  • 13pcs drill tap kit include SAE and metric sizes, Suitable for most commonly used screw tapping.SAE Included 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC and 1/4-20NC,Metric included M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5 , Includes storage case and quick change adapter for easy bit switching.
  • Drill, tap, deburr and countersink in one quick and easy action,and complete job on copper, brass, aluminum, sheet metal ,mild steel and plastic.work completely, greatly save processing steps and time costs, and improve work efficiency..
  • Each drill tap bit is engraved with the right size, which is convenient for you to choose the size that suits you. Strong hex shank ensures strong connection to drill.a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • Included convenient swivel storage case,Swivel feature props up tap drill bits and securely holds them in place until ready t....
Check Stock

Hanson 1765531 Pts Drill Plus Tap Combo 6-32' Number 36 for Tap Die Extraction

  • This tap and drill set contains a convenient HCS tap and HSS drill bit.
  • Self-aligning taps start and thread straight virtually every time.
  • Great for through holes and irregular surfaces.
  • Plug taps are ideal for general purpose threading.
  • Special chip-breaking technology cuts chips easier.
Check Stock

EUROBOOR Weldon Tap Holder - 7/16' Inch Mag Drill Tap Collet with 3/4' Inch Shank & Weldon Shank - TCM.7/16ANSI

  • EASY ADAPTION - This tap collet is designed for easy for mag drills with 3/4" shank.
  • NO TOOLING NEEDED - This tap fits perfectly inside your machining tool.
  • FAST TAPPING - Increase the efficiency on the job with quick exchanges and interchangeability for faster tapping.
  • HEAVY DUTY MAKE - With heavy duty machined tap holder, you can rely on a long lasting tool on the job.
  • COMPACT DESIGN - Made for easy transport and storage, this tap holder is made in a compact design.
Check Stock

5PCS Combination Drill Tap Bit Set Screw Tapping Hex Shank HSS Metric/Imperial Plug Drill Bits Hand Tools 1/4-20NC

  • ★【Combination Drill Tap Bit】6Pcs Combination Drill and Tap Bit, Inculued 6-32NC, 8-32NC, 10-32NC, 10-24NC, 12-24NC, 1/4-20NC.
  • ★【Quality Material】Made of High-speed Steel 4341, Hard, Rustproof, Solid and Durable.Bonderizing Surface protects the metal from corrosion. Improve the finish adhesion and corrosion resistance. High quality, long lasting and durable..
  • ★【Working Efficiently】These Combination Drill Tap Bit complete hole drilling, tapping, deburring and countersinking in one operation save processing steps and time costs, improve working efficiency..
  • ★【Perfect Design】1/4 inch Hex Shank,quick change for cordless drill. Back tapered beyond tap to prevent thread damage from over-drilling, And self-centering point, do not need assistant center drilling or center punching..
  • ★【Widely Application】Suitable for Low Hardness Materials Such as 10-gauge wood, plastic copper, brass, aluminum, sheet metal and other soft materials. They are not suitable for drill and tap in very hard metals..
Check Stock

YDLQWCZ Combination Drill Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6 Screw Tap Bit 1/4 Inch Hex Shank HSS Spiral Flute Tapping Tool Set Kit Deburr Countersink Bit

  • SAE and Metric Sizes - This drill tap kit includes SAE and metric sizes and is the most commonly used screw tapping. 6pc SAE includes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC and 1/4-20NC, including 6 metric: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5..
  • Drill Tap Bits Set - Each tap drill has its corresponding size in the storage box, so you can choose the exact drill bit effortlessly. The 1/4" (6.35mm) hexagonal shank has a tapered end to prevent excessive knocking.The back taper exceeds the tap to prevent over-drilling and thread damage..
  • High Speed Steel 4341 Material - The surface of the titanium alloy combined drill bit is treated with titanium alloy, which effectively improves the cutting performance of the drill bit, is more wear-resistant, and prolongs the service life. Made of high-speed steel 4341, to ensure sharpness, speed, and maintain strength and efficiency..
  • Improve Efficiency - Drilling, tapping, deburring, and countersinking can complete the processing of copper, brass, aluminum, sheet metal, low carbon steel, and plastic at one time, improving work efficiency. Deepening the chip flute helps to remove the chips and debris on the tap, reducing friction and heat, so as to achieve a faster and colder drilling process..
Check Stock

Greenfield Threading 330088 Metric High Speed Steel Jobber Drill Plug Hand Tap Set (18-Piece Set)

  • Features：003cbr003e 1：Complete hole drilling, tapping, deburring and countersinking in one operation with power impact tool.003cbr003e 2：Back tapered beyond tap to prevent thread damage from over-drilling.003cbr003e.
  • 3：Made from high-speed steel, these combination drill and tap bits are designed to tap up to 10-gauge wood, plastic copper, brass, aluminum, sheet metal and other soft materials. They are not suitable for drill and tap in very hard metals..
  • 4:A perfect countersink drill bit set, a perfect tap and die set, two in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
  • 5:High speed steel construction provides extra durability to drill bits to perform multiple drilling operations while maintaining its strength..
  • 6:Self-centering point, do not need assistant center drilling or center punching..
Check Stock

wesleydrill Titanium Combination Tap Drill Bit Set 6 Pcs M3-M10 Screw Tapping Bit Multi-Function Bit Set Fit for Light Metal Aluminum Board Iron etc

  • [Specifications and packaging]: 6 Piece multi-function drill bit set.Include size:M3X0.5,M4X0.7,M5X0.8,M6X1,M8X1.25,M10X1.5..
  • [Fitment]: Tap drill bit set is a convenient hex shank drill tap bits set that can simultaneously complete hole drilling, tapping, deburring and countersinking.Suitable for drilling tapping cutting on light metal aluminum board iron etc..
  • [Material]: Thread drill bit set is made of HSS4341 (high-speed steel) +titanium coating for capability and durability..
  • [Advantage]: Drill tap bits set's 1/4 inch hex shank fits into power tools more easily and securely.When using M3-M6, the most suitable speed of the electric drill is 1200/sec, the M7-M10 is 1000/sec..
  • [Quick Replacement, One-Click Drilling]: Metric tap drill bits fast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
Check Stock

Core Drill Adapter 5/8 Threaded Arbor Diamond Hole Saw 5/8 inch - 11 to 1/2 Shank Sanding Attachment Arbor Shaft Adaptor Heavy Duty

  • HEAVY DUTY Core Drill Adapter for 5/8-11 thread to straight 1/2 inch shank..
  • Core Bit Adapter converts 5/8" - 11 Thread to 1/2 inch Straight Shank.
  • Heavy Duty - Twist Resistant Alloy- Most Diamond Core Masonry Bits, tile drill bits, stone polishing kit, granite polishing kit, diamond polishing pads, diamond cup grinding wheel, grinding stone for drill and Back Holders are 5/8 inch - 11 threaded adapter for core bits.
  • Standard drill chuck adapter or core drill bit adapter will help you use your own standard drill with drill grinding bit and drill bit core. Connects to 5/8" 11 Female Threaded Tools, Core Bits, Hole Saws - Makes them a 1/2 inch Shank as a drill shank adapter.
  • Drill bit adapter for granite, concrete, glass, brick. Use your diamond core bits for granite or diamond hole saw for grinder with standard drill. Now you can use sanding, cutting and polisher tools with standard chuck shank with our adapter for core bits.
Check Stock

Inch Metric Tap Drill Sizes and Decimal Equivalents Chart Non Slip Mouse PAD

  • Complete full chart of drill sizes with decimal equivalents and millimeters.
  • Tap drill sizes for Inch Tap Sizes from 0-80 to 2-4 1/2 , UNC and UNF..
  • Tap drill sizes for Metric Tap Sizes from 1.6x0.35 to 39x3..
  • Made from Non-Slip Neoprene Rubber & HQ Sponge & Cloth. Perfect for Optical Mouse, Trackball Mouse, Mechanical Mouse..
Check Stock

1 3/8 Diamond Hole Saw Core Heavy Duty Diamond Drill Bit Concrete Granite Quartz Porcelain Slab Countertops Ceramic Tile Brick Brazed with 5/8″-11 Thread 1-3/8 in

  • Heavy duty. pro grade, vacuum brazed diamond hole saw for quartz, granite, concrete, cinder block, brick drilling..
  • Diameter is 1-3/8 inch with 5/8 inch – 11 threaded connection, maximum depth of cut is 1-3/8 inches..
  • Diamond vacuum brazed commercial grade, long life diamond core drill bit hole saw. For heavy duty professional applications..
  • Tile core bits used with core hole drill tools with 5/8 inch -11 threaded angle grinder or other tools..
  • Commercial grade, professional quality heavy duty diamond bits for drilling stone, diamond hole saw bits, diamond drill bit for granite bits for drill.
Check Stock