ReviewsHeavyweight Thermocouple

Fluke - FLUKE-52-2 60HZ 52-2 60HZ Dual Input Digital Thermometer

Thermocouple thermometer for use in applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications.
Measures temperatures in Celsius, Fahrenheit, or Kelvin via a Type K, Type J, Type T, or Type E thermocouple probe.
Includes a Type K bead thermocouple probe with a 40" cable that measures from -40 to +260 degrees C (-40 to +500 degrees F).
Provides the relative time of minimum, maximum, and average temperature measurements for monitoring.
Conforms to NIST standards for compliance with regulations.

Check Stock

Digital pyrometer F,C pottery ceramic glass kiln Sensor Thermometer Thermocouple

Digital Pyrometer Temperature range: -50°C to 1300°C ( -58°F to 2372°F).
Ceramic thermocouple Temperature range: -50°C to 1300°C ( -58°F to 2372°F).
Included Pyrometer and 2 type K thermocouple ( One 3" K type thermocouple(-50 to 400°C) and one Kiln K type (-50 to 1300°C)).
Decimal or round number display selectable (decimal range is -58.0F to999.9F and round number range is -58F to 2372F).
Shipping to USA is 3-6 business days. For more information please go to our website Thermomart.

Check Stock

PATIOSIR Patio Gas Heater Dump Switch, Outdoor Heater Replacement Parts Thermocoupler &Tilt Switch, Garden Heater Igniter Repair Parts

☆The head of thermocouple is fixed thread, need to be compared that it is suitable for your heater before purchasing the product..
☆Made of high-standard brass and red copper,and ABS materials, during operation, you need to hold the valve for 5-10 seconds and then thermocouple will start work..
☆Suitable for Propane gas heaters with Thermoelectric Safety, such as room gas heater, outdoor patio heater and other Thermoelectric gas products..
☆The thermocouple is easy to install. The probe is connected to the ignition device, the thermocouple is connected to the valve, and the other two ports are connected to the safety dumping switch, which does not require special tools and is prefect compatible for the original part..
☆The safety tipping switch will automatically stop the heater when the heater is tilted or dropped, which can prevent the occurrence of gas leakage when the fire is extinguished and the gas is still on, which is more secure. Suitable for weak dump switches with gas R ≤ 10mΩ..

Check Stock

Cooper-Atkins 93230-K Thermocouple Thermometer (Thermocouple K Type Thermometer) - EconoTemp Combo Pack

Thermocouple K Type Thermometer - Includes 32311 thermocouple thermometer, wall bracket, and DuraNeedle probe 50336-K. For foodservice and general purpose temperature monitoring..
Accurate Thermocouple Thermometer - Temperature range from -40 to 500 degrees Fahrenheit, precise to +/- 2 degrees Fahrenheit across entire range..
DuraNeedle 2 Second Response Time - Includes DuraNeedle 50336-K probe with ultra-fast response time. Features easy to read digital display and 10 minute auto shutoff..
Cooper-Atkins Corporation - Headquartered in Middlefield, CT, Cooper-Atkins has been a leading manufacturer of quality time, temperature, and humidity instruments serving the Foodservice, HVAC and Healthcare markets since 1885..

Check Stock

Fluke 52-2 Dual Input Digital Thermometer, 3 AA Battery, -418 to 2501 Degree F Range, 60 Hz Noise Rejection

Thermocouple thermometer for use in applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications.
Measures temperatures in Celsius, Fahrenheit, or Kelvin via a Type K, Type J, Type T, or Type E thermocouple probe.
Includes a Type K bead thermocouple probe with a 40" cable that measures from -40 to +260 degrees C (-40 to +500 degrees F).
Provides the relative time of minimum, maximum, and average temperature measurements for monitoring.
Conforms to NIST standards for compliance with regulations.

Check Stock

NEWREACH Thermocouple and Tilt Switch for Outdoor Patio Heater, Dump Switch for Propane Gas Patio Heater Pyramid Style Tower Heater Firesense Heater, Tilt Switch and Thermocouple Sensor Kit for Winter

This thermocouple and tilt switch kit is to fix the problem that the pilot light or flame does NOT stay lit, or the thermocouple is broken..
The safety dump switch will automatically stop the heater when it's tilted or dropped, prevent the occurrence of gas leakage when the fire is extinguished and the gas is still on, which is more secure..
Easy to install, just connect the probe to the ignition device, the thermocouple to the valve, and the other two ports to the safety dumping switch..
Works with propane gas patio heater, outdoor standing patio heater, pyramid-style tower heater, fire sense heater, dome-style heater, tabletop heater, Amazonbasics heater, Hampton Bay patio heater, Lowes patio heater, etc..
Thermocouple wire total 350mm with temperature resistance sleeves, with threaded M8*1 and M6. Suitable for weak dump switches with gas R ≤ 10mΩ. Please check the compatibility before purchasing this product..

Check Stock

Fluke BC-7240 Battery Charger/Eliminator, For 75X Documenting Process Calibrator

Dual infrared and thermocouple thermometer for noncontact or contact temperature measurement in HVAC/R systems and manufacturing, electrical, and industrial environments.
Measures temperature from 40 to Plus-550 degrees C ( 40 to Plus-1022 degrees F) with an accuracy of plus or 1 degree C (plus or 2 degrees F) for the infrared sensor and an accuracy of plus or 2 degrees C (plus or 4 degrees F) or 1 percent of the reading, whichever is greater, for type K thermocouple input.
12:1 infrared distance to spot ratio with laser sighting for pinpointing the measurement area.
Included type K thermocouple pipe probe wrapped in flexible hook and loop fastener with a 20 inch cable takes contact measurements from 0 to 100 degrees C (32 to 212 degrees F).
CE mark indicates compliance with applicable EU directives.

Check Stock

K Type Thermocouple Temperature Thermocouple Sensor Temperature Detector Temperature Gauge with M4 Thread for 3D Printer Temperature Sensor

Type K (chromel–alumel) is the most common general-purpose thermocouple with a sensitivity of approximately 41 µV/°C.[10] It is inexpensive, and a wide variety of probes are available in its −200 °C to +1350 °C (−330 °F to +2460 °F) range. Type K was specified at a time when metallurgy was less advanced than it is today, and consequently characteristics may vary considerably between samples. One of the constituent metals, nickel, is magnetic.
a characteristic of thermocouples made with magnetic.
They operate very well in oxidizing atmospheres. If, however, a mostly reducing atmosphere (such as hydrogen with a small amount of oxygen) comes into contact with the wires, the chromium in the chromel alloy oxidizes. This reduces the emf output, and the thermocouple reads low. This phenomenon is known as green rot, due to the color of the affected alloy. Although not always distinctively green, the chromel wire will develop a mottled silvery skin and become magnetic. An easy way to check for t.
Hydrogen in the atmosphere is the usual cause of green rot. At high temperatures, it can diffuse through solid metals or an intact metal thermowell. Even a sheath of magnesium oxide insulating the thermocouple will not keep the hydrogen out..

Check Stock

Thermocouple & Tilt Switch for Patio Heater, Thermocouple and Dump Switch Repair Kit for Propane Patio Heater Glass Tube Patio Heater Gas Heater, Thermocouple Replacement for Tower Heater, 2 Pack

Purpose - This patio heater repair kit is to solve problem of pilot light not staying lit and heater not ignited. Problem can usually be fixed by replacing thermocouple and dump switch correctly..
Wide Application - Suitable for thermoelectric gas heater, outdoor propane heater, glass tube patio heater, porch patio heater, standing patio heater, tower heater, Pyramid heater, Hampton Bay heater, etc..
Easy to Replace - Probe is connected to the ignition, thermocouple is connected to the valve, the other two ports are connected to the safety dumping switch. If you are handy, this repair kit can save you a new heater..
Dimension - The thermocouple wire has total length of 350mm with temperature resistance sleeve. It has an M8*1 fixed thread head with end thread nuts that are compatible with 8mm gas valves. 15A weak current safety dump switch for gas R≤10 mΩ. Probe is not threaded. Note: Check your lead lengths before purchasing..
Package included tilt switch X 2pcs, thermocouple X 2pcs..

Check Stock

Fluke 53-2 Single Input Digital Thermometer with USB Recording, 3 AA Battery, -418 to 3212 Degree F Range, 60 Hz Noise Rejection

Thermocouple thermometer for use in applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications.
Measures temperatures in Celsius, Fahrenheit, or Kelvin via a Type K, Type J, Type T, Type E, Type N, Type R, or Type S thermocouple probe.
Includes a Type K bead thermocouple probe with a 40" cable that measures from -40 to +260 degrees C (-40 to +500 degrees F).
Stores up to 500 points of data for analysis and monitoring.
Conforms to NIST standards for compliance with regulations.

Check Stock

Very High Temperature K-Type Thermometer with Ceramic Insulated Probe Sensor for Kiln Crucible and Forge up to 2372 °F 1300 °C Model CR-8

High Temperature K-type Thermocouple with ceramic tube insulation.
Temperature Range: -328 to 2498 °F (-200 to 1370 °C), Class 1 or Select Grade K-type Thermocouple wire.
Very thick AWG8 (3.2 mm) Thermocouple Wire, Total length 18.5 inch, insulated length 16.5 inch.
Oval insulator with a max diameter of 0.5 inch, 1 inch long insulator segments.
Large LCD display: 3 1/2 digits and Easy switch between °F and °C.

Check Stock