ReviewsHeight Gauge

BLUEROCK Tools Model SL-1.0 Portable Seam Locker for .5-1mm Pittsburgh Ducts Longitudinal Seams 27-20 Gauge

  • BLUEROCK Tools Model SL-1.0 Seam Locker Closer.
  • Closes .5-1mm thick Pittsburgh lock joints on rectangular and square horizontal ducts.
  • Lock Capacity: 28-20 gauge Galvanized, 26-20 gauge Standard steel), 0.5mm-1.0mm (See other model SL-1.25 and SL-1.5 for thicker gauge steel).
  • Height of Flange (the metal edge to be folded over): 6-11mm ONLY (See other model SL-1.25 for 11-13mm flange height).
  • Motor Data: 120v, 60Hz, 11.6 Amps, 1400W, Standard US Grounded Plug.
Check Stock

XtremepowerUS 20 Gallon Portable Waste Oil Drain Tank Air Operated Drainage Adjustable Funnel Height with Wheel Red

  • Oil lift drain special valve can easily transfer the used oil from the 20-Gallon tank to the recycling container at any height.
  • Ideal for extracting waste oil and other fluids from vehicles using venturi-vacuum extracting system or draining by gravity.
  • Height Adjusts From 45" To 72-1/2" For Draining Fluids From Vehicles On Lifts.
  • Includes swivel casters and polyurethane wheels for smooth and quiet maneuvering.
  • Working Pressure: 10PSI - Gauge: Gauge: 0-23PSI In 0.5 PSI Increments.
  • Regulator & Gauge With 1/4 Inch NPT Air Coupler.
Check Stock

MusicNomad Truss Rod Gauge & String Action Gauge Combo Bundle (MN614)

  • Two Most Popular Gauges Used in the Setup Process for Electric, Acoustic, Classical and Bass Guitars in One Combo Pack.
  • Precision String Action Gauge with accurate measurements that are easy to read with the black finish contrasted with deep etched white markings. We include measurements in inches, metric & 64ths to customize to your preference. Our convenient chart on proper height by instrument type takes out the guesswork..
  • String Action Gauge includes Pickup Height Ruler to Dial in your pickup sound & designed with 4 different side lengths you can find the side that lays across 3 frets and use as a Fret Rocker to check if you have any uneven fret heights..
  • Precision Stainless Steel Truss Rod Gauge Includes the 3 Most Common Truss Rod Neck Relief Measurements (.006.
Check Stock

1 pc Precision Stainless Steel V-WAC Type Undercut Gauge Single Fillet Weld Depth Gauge Welding Measure Inspection Tools (Inch)

  • Good Performance --- The V-WAC gauge can easily and quickly check the four essential measurements required for compliance with NRC visual weld acceptance criteria. That is, checking undercut depth, porosity comparison, amount of porosity per linear inch and crown height.
  • Good Quality --- This gauge is made of high quality stainless steel, durable and rust-resistant. Thick and sturdy gauge is not easy to deform, with high precision.
  • Convenient to Use and Easy for Reading --- Laser etched markings, precise and clear, it won't rub off easily and convenient for using.
  • Portable --- Small size and easy to carry, you can simply keep it in your pocket.
  • this undercut gauge will be delivered in a black soft pouch bag (as shown in the picture).
  • Widely Used --- It is convenient to use and great for welding inspection, used to checks undercut, crown height, porosity.
Check Stock

Uiegurit Guitar Neck Notched Straight Edge Luthiers Tool with String Action Ruler Guitar Radius Gauge for Guitars Neck Leveling

  • GUITAR LUTHIER TOOL: Include guitar straight edge, string action ruler and radius gauge, great for guitar technicians and guitarists to maintain and repair their instrument themselves in a short time, reducing buzzing.
  • NECK CHECK GUITAR TOOLS: Dual scale design, designed to check guitar neck straightness of the fretboard and frets, the fret rocker can span over 3 frets and can check if frets are on the same level, works well with most guitar.
  • GUITAR RADIUS GAUGE: Stainless steel material, set of 9 including: 7.25", 9.5", 10", 12", 14", 15", 16", 17" and 20" radius, luthier tools for Guitar and Bass Setup.
  • GUITAR ACTION GAUGE: Etch printing on double sides, metric & imperial, accurate and clear to measure string height, bridge height, nut slot depth, bridge slot depth and pickup height.
  • THE INSTRUCTIONS OF NOTCHED STRAIGHTEDGE: By sliding the notched grooves of the straight edge until they all set flat against guitar frets, you can see if your guitar neck is straight or needs adjustment.
Check Stock

K Tool International Heavy Duty Tear Down Tray and Work Table with Drawer, Portable and Adjustable, 220 Pound Capacity, Rubber Corners, Black; KTI75107

  • ADJUSTABLE HEIGHT - 30" adjustable height work table from 34" - 47.75" with total weight capacity of 220 lb.
  • PROTECTION - Rubber bumper corners for protection and top work surface with liner included.
  • WORK TABLE DIMENSIONS - 29.3" x 20.2" x 34.5".
  • EASY TO MOVE - Four 2" x 1.25" swivel casters for easy moving.
  • DURABLE STEEL - 16 gauge steel tray, 22 gauge steel drawer and 13 gauge steel adjustable tube.
Check Stock

Richene Rain Gauge Upgrade, 7" Capacity Glass Rain Gauge Outdoor-Detachable Rain Guage with Lengthen Stake Best Rated for Yard, Lawn & Garden

  • 【Upgrade Stylish Design】This rain gauge outdoors best ratedconsists of three sections, and the overall height reaches 29 inches, The height of 29inch is higher than other glass rain gauges on the market, so it is not easy to be covered by flowers and grass .Upgraded lengthen stake allow you to see the Scale value without squatting down, You can also remove the middle section and adjust it to a height of 19.7inches to meet your different needs..
  • 【Clear and easy to read】The glass tube of the rain gauge is made of high-quality glass, which is transparent and textured, Being glass will make it easy to clean and will not discolor like plastic ones.and the Bold scale on the glass of 7 inches are easier to read ,In addition, our rain gauge tube Added blue paint at the rear of the glass tube to make the rainfall clearer and easier to read, effectively avoiding the problem of unclear scale caused by reflection or transparency..
  • 【Easy installation and use】This rain gauge can be fixed on the ground or hung on the fence, A circle in the top is designed for hanging the glass rain gauge, which is very convenient. The glass tube inside is easy to take out, which is con....
Check Stock

Vankcp Guitar Luthier Tools, 32 Blades Feeler Gauge, 9 Understring Radius Gauge, 4Pcs Notched Radius Gauge, 1Pcs String Action Gauge Ruler, 2 Fingerboard Guards for Guitar and Bass Setup

  • 32 Blades Feeler Gauge: Made of stainless steel, measuring range: 0.0015 inch/ 0.04 mm to 0.035 inch/ 0.88 mm, It can measure the height of the pickup and strings, the unevenness of the fingerboard etc...
  • 9 Understring Radius Gauge: Set of 9 including: 7.25", 9.5", 10", 12", 14", 15", 16", 17" and 20" radius, It can be applied to accurately measure fret board radius, good for Guitar and Bass Setup maintain and adjustment..
  • 4Pcs Notched Radius Gauge: Include 2 narrow radius gauges and 2 wide radius gauges in 7.25”, 9.5”, 10”, 12”, 14”, 15”, 16”, 20 ” radius, stays parallel to the fingerboard, quickly and accurately find the curvature of a fingerboard or bridge with these radius gauges without taking the strings off..
  • 2Pcs Fingerboard Guard: Two different sizes: Large: 3.2 '' * 0.9 '' Small: 3.2 '' * 0.5 '', Prevents scratching or damaging to guitar or bass fretboard when filing and polishing frets..
  • 1Pcs String Action Ruler: Size 3.5'' X 2'' (L * W), marked with metric and imperial scale respectively on 2 sides, etch printing on double sides, accurate and clear to measure string height, bridge height, nut slot depth, bridge slot depth and pickup height..
Check Stock

3350 Injector Height Gauge Kit for Detroit Diesel Engines Series 50&60 J-1853/J-42749/J-45002/J-42665/J-1242/J-35637-A/J-39697

  • 3350 injector height gauge kit for Detroit Series 50 and 60 engines. Similar to J-42749, J-45002, J-39697, J-42665, J-35637-A..
  • Used to properly set injector body height to the injector follower for proper fuel injector timing..
  • Apply to 78.2mm (Series 60, Engine: 1986-1993 DDEC I).
  • 78.2mm (Series 60 and 50, Engine: 1986-1993 DDEC II).
  • 78.8mm (Series 60 and 50, Engine: 1994-1997 DDEC III).
  • 80.3mm (Series 60, Engine: Late 1997 DDEC III).
  • 80.3mm (Series 60 and 50, Engine: 1997-1998 DDEC IV).
  • 81.0mm (Series 60 and 50, Engine: 1998-1999 DDEC IV).
  • 81.0mm (Series 60, Engine: 2000-2003 Marine).
  • Injector height gauge kit is made from high quality steel, providing enough strength and durability, corrosion-resistant, anti-wear property, no deformation..
  • Package: 1*Knurled handle, 5*Gauge Blocks(78.2mm, 78.8mm, 80.3mm, 81.0mm and 82.1mm)./ If you are not satisfied with the item, return it in 30 days and get a full refund.
Check Stock

HOTSYSTEM Universal 2inches 52mm Dual Hole Dash Dashboard Gauge Meter Mount Pod Holder Black Cover for Car Exhaust Gas Oil Water Temperature Temp Voltage Air/Fuel Ratio Turbo Boost Gauge

  • Width:6.34"/161mm Height: 2.95"/75mm Hole Depth:2.56"/65mm-3.54"/90mm.
  • Suitable for 2"/52mm exhaust gas temp gauge, turbo boost gauge, voltage gauge, tachometer gauge Air/Fuel Ratio gauge and so on..
  • Mounted on any surface,gauge can be hold firmly..
Check Stock

HALLOWELL Maintenance-Free Quiet Lockers - Gray

  • HALLOWELL Maintenance-Free Quiet Lockers feature sound-absorbing rubber door bumpers placing them among the most quiet lockers on the market today..
  • Full-height door panel is welded to the continuous piano hinge side and includes a 3" wide door stiffener..
Check Stock