ReviewsHelical Bevel Gear Manufacturers

Liftmaster/Chamberlain- Sears/Craftsman 41a4885-2 Genuine Replacement Part Gear and Sprocket Kit, DC Belt

  • Liftmaster 41A4885-2 Belt Drive Gear and Drive Pully Set.
  • Includes:Drive shaft with belt pulley,spring washer, and.
  • thrust washer, retaining ring, bearing plate, and.
  • roll pins (2), drive gear, worm gear, helical gear with retainer, grease,installation instructions..
  • For BELT DRIVE Units only Manufactured 1984-2001..
Check Stock

CNBTR 45# Steel 1.5 Module 12 Teeth 8mm Hole Dia Tapered Bevel Gear Wheel for Mechanical Accessories Pack of 2

  • Tapered Bevel Gear Wheel, 1.5 Modulus, 12 teeth, 8mm hole diameter..
  • Made of 45# steel with high wear-resistance, strong and durable..
  • Widely use in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc..
  • Description: 1:1 bevel gear wheel can only used with 1:1 gear wheel, and can not match the other modulus of teeth..
  • Scope of application: for all kinds of mechanical transmission occasions..
Check Stock

AOBEN 21V Cordless Hammer Drill, High Torque 1200 In-lbs, 1/2-Inch Power Hammer Drill Brushless, with 4.0Ah Li-ion Battery and Charger, Auxiliary Handle, Variable Speed

  • Helical-cut steel, heat-treated steel gears for long life and durability for the electric drill.
  • Metal gear housing for jobsite durability and increased reliability of the corded drill.
  • DEWALT corded drill has two-finger trigger for increased comfort.
  • 360-degree side handle for greater control and versatility.
  • Helical-cut steel, heat-treated steel gears for long life and durability.
  • Metal gear housing for jobsite durability and increased reliability.
  • Two-finger, rubber trigger for increased comfort.
  • 360 degree side handle for greater control and versatility.
  • Included with drill: chuck key with holder and 360-degree side handle.
Check Stock

Jigging Reel Saltwater Slow Pitch Jigging Reels 6.3:1 Right Hand BalanZze 9BB+2RB 55lbs Drag High Speed Jigging Reels Conventional Reel Big Game Heavy Duty

  • ...bility and quality, used by professionals worldwide for slow pitch jigging, conventional, deep sea, lever drag, boat fishing, offshore fishing, and other big games.
  • High-quality bear - Imported from Japan shielded stainless steel 9BB+2RB bearing. Smooth rotation, and not easy to get rust. Stainless steel easy-to-cut helical gear with a high gear ratio of 6.3:1, the helical tooth is high strength and low noise, the max drag could be up to 66lbs.
  • Material of reels - The mainframe, spool, and side cover of this jigging reel are all made of high strength A6061-T6 aluminium alloy to ensure that the product can achieve a smooth surface and super-strength effect. This slow pitch jigging reel gear disc /gear /spindle is by stainless steel precision machining. Other spare parts are also stainless steel material, durable and not easy to wear.
  • Design of All-Metal bending rocker arm Is not easy to damage and deform. Well connected with the shaft, makes the reels more strong, guarantees the ability of haul line. More comfortable grip, storage is more convenient.
  • Offers Up to 66Lbs/30KG of carbon fiber drag, carbon drag delivers a wide range, smooth performance even when the reel is bathed in saltwater for hours (even days). The wrench design hides the crisp and loud ....
Check Stock

CNBTR 45 Steel 1.5 Modulus Silver 10mm Hole Diameter Tapered Bevel Gear Wheel 20T Pack of 2

  • [Product Type] Tapered Bevel Gear Wheel, 1.5 Modulus, 20T, 10mm hole diameter, 22mm overall length. Please confirm the correct size before purchasing..
  • [Material] Made of 45 steel material, not easy to wear, durable and lasting performance. This gear is an excellent industrial replacement accessory..
  • [Application] Used widely in conveying, hardware, agricultural equipment, printing machinery, automotive applications, mechanical transmission, etc..
  • The contact between the gears is firm, which ensures the normal operation of the machine and good bearing capacity..
  • Note: 1:1 bevel gear (can only be matched with 1:1, can not be matched with gears with other modules and T numbers)..
Check Stock

CNBTR 45 Steel 1.5 Modulus Silver 8mm Hole Diameter Tapered Bevel Gear Wheel 20T Pack of 2

  • [Product Type] Tapered Bevel Gear Wheel, 1.5 Modulus, 20T, 8mm hole diameter, 22mm overall length, Maximum Outer Diameter: 31.6mm/1.24". Please confirm the correct size before purchasing..
  • [Material] Made of 45 steel material, not easy to wear, durable and lasting performance. This gear is an excellent industrial replacement accessory..
  • [Application] Used widely in conveying, hardware, agricultural equipment, printing machinery, automotive applications, mechanical transmission, etc..
  • The contact between the gears is firm, which ensures the normal operation of the machine and good bearing capacity..
  • Note: 1:1 bevel gear (can only be matched with 1:1, can not be matched with gears with other modules and T numbers)..
Check Stock

Linear HAE00048 Helical Gear w/ Grease

  • Compatible with LDO33, LDO50, LSO50 and LCO75 models.
  • Includes gear, grease and hardware(all shown in picture).
Check Stock

Yibuy 2 PCS 45# Steel 16 Teeth 1.5 Module 8mm Hole Diameter Bevel Gear Wheel

  • 64 teeth for use with G486Y-P mating bevel gear in 4:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

DEWALT Corded Drill with Keyless Chuck, 7.8-Amp,1/2-Inch (DW246)

  • Single-sleeve keyless chuck with spindle lock provides greater bit retention and tool-free convenience of the electric drill.
  • Triple gear reduction provides increased torque and reduces gear stress for the corded drill.
  • DEWALT corded drill has rubber grip and two-finger trigger for increased comfort and greater control.
  • Metal gear housing for jobsite durability and increased reliability.
  • Helical-cut steel and heat-treated steel gears for long life and durability.
Check Stock

T159348 Axle Bevel Gear Aftermarket for John Deere Backhoe Sub. No. 4461351022

  • 16 teeth for use with L149Y-G mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

SVBONY SV106 Guide Scope 60mm Multi-Use Finder Scope Guide Scope with Helical Focuser F4 for SG4 QHY5II ZWO SG4 CCD Astronomical Telescope

  • Versatile 60mm aperture Guide Scope with a built-in helical focuser for precise focusing of potential guide stars.
  • will help guide you to capturing higher quality astrophotos.
  • an ideal addition to any astrophotographers collection of gear.
  • The helical focuser simply moves the attached device inwards or outwards while maintaining its orientation.
  • this convenient feature means your field of potential guide stars will not rotate as focus is adjusted, further increasing ease of use.
  • For those nights when you don't plan to capture astrophotos exposures, this versatile Guide Scope can double as a straight-through finder scope with an optional 1.25" eyepiece installed.
  • For example, inserting a 25 mm eyepiece creates a 9.6x60 finder scope, or you can insert one Illuminated Centering Eyepieces for use as a finder with illuminated crosshairs for easy aiming.
  • The focuser boasts 8 mm of precise helical focus travel.
  • plus telescoping drawtube housing provides up to 35mm of additional back-travel if needed for your particular autoguider device.
  • a compression ring fitting keeps any inserted autoguider cameras or eyepieces free of pesky scratches.
  • The Multi-Use Guide Scope with Helical Focuser also features male T-threads on the focuser collar f....
Check Stock