ReviewsHelical Flute Taps

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

• Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
• Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
• BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
• Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
• EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
• Each compartment is labeled with sizing for simple identification.
• PACKAGE CONTENTS: Combination set contains both metric taps and dies.
• Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
• (Thread pitch gauge not included, but we recommend using these taps to light up threads from the bolt).

uxcell 5 Pairs Metric Hand Threading Tap Set M4 Thread 0.7mm Pitch Taper & Plug Milling Taps Straight Flutes High Speed Steel

• Metric Taps: M4 x 0.7 metric taps set. Taper style: starts the thread square with the workpiece. Plug style: generally used in through holes..
• Applications: The hand threading tap kit is used to re-thread damaged or jammed threads. Suitable for threading mild steels, aluminum, iron, copper, hard plastic..
• Easy to Use: Hand tapping, mainly used with tap wrenches. Standard thread milling taps are used to thread through holes or shallow and blind holes..
• Features: Straight flute design, downward chip removal. High speed steel tool is high hardness, high strength, good toughness, and wear resistance..
• Tips: Add appropriate tapping oil for higher quality internal threads and more durable taps. Without any additional coatings, good for general purpose applications..

uxcell 5 Pairs Metric Hand Threading Tap Set M2 Thread 0.4mm Pitch Taper & Plug Milling Taps Straight Flutes High Speed Steel

• Metric Taps: M2 x 0.4 metric taps set. Taper style: starts the thread square with the workpiece. Plug style: generally used in through holes..
• Applications: The hand threading tap kit is used to re-thread damaged or jammed threads. Suitable for threading mild steels, aluminum, iron, copper, hard plastic..
• Easy to Use: Hand tapping, mainly used with tap wrenches. Standard thread milling taps are used to thread through holes or shallow and blind holes..
• Features: Straight flute design, downward chip removal. High speed steel tool is high hardness, high strength, good toughness, and wear resistance..
• Tips: Add appropriate tapping oil for higher quality internal threads and more durable taps. Without any additional coatings, good for general purpose applications..

uxcell 5 Pairs Metric Hand Threading Tap Set M1.4 Thread 0.3mm Pitch Taper & Plug Milling Taps Straight Flutes High Speed Steel

• Metric Taps: M1.4 x 0.3 metric taps set. Taper style: starts the thread square with the workpiece. Plug style: generally used in through holes..
• Applications: The hand threading tap kit is used to re-thread damaged or jammed threads. Suitable for threading mild steels, aluminum, iron, copper, hard plastic..
• Easy to Use: Hand tapping, mainly used with tap wrenches. Standard thread milling taps are used to thread through holes or shallow and blind holes..
• Features: Straight flute design, downward chip removal. High speed steel tool is high hardness, high strength, good toughness, and wear resistance..
• Tips: Add appropriate tapping oil for higher quality internal threads and more durable taps. Without any additional coatings, good for general purpose applications..

HORUSDY 5-Piece NPT Pipe Tap Set, Sizes Includes 1/8\

• Carbon steel pipe taps are designed to clean and/or rethread to damage or block pipe threads..
• Right-hand cutting tool has a clockwise cutting function..
• NPT Pipe taps sizes includes:1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14. Equipped with special storage box..
• Round shank, square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts..

Drillco 4570E Series High-Speed Steel Taper Pin Reamer, Helical Flute, Round Shank, Uncoated (Bright)/Black Oxide Finish, 1 Size, 2-15/16\ Length

• High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
• Available in uncoated (bright) and black oxide finish.
• Round shanks allow use with a wide variety of toolholding systems.
• Square shank allows hand (straight and spiral flute) reamers to be held in a tap wrench or vise, depending on whether the reamer of the part is rotated.

HORUSDY 6-Piece NPT Pipe Tap Set, Sizes Includes 1/8\

• Carbon steel pipe taps are designed to clean and/or rethread to damage or block pipe threads..
• Right-hand cutting tool has a clockwise cutting function..
• NPT Pipe taps sizes includes:1/4"-18 NPT, 3/8"-18 NPT, 1/2"-14 NPT, 3/4"-14NPT, 1"-11.5NPT. Equipped with special storage box..
• Round shank, square end. Straight flute tools allow chips to collect in the Flutes as they cut and are well suited for most applications in shallow cuts..
• Uncoated tools have only the base material and do not need any additional treatment or coating, so they can be widely used..

Machine Tap 1/2\-13 UNC Thread Pitch 4 Flutes, High Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, HSS Machine Screw Plug Tap

• Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
• Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
• BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
• Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
• EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
• Each compartment is labeled with sizing for simple identification.
• PACKAGE CONTENTS: Combination set contains both metric taps and dies.
• Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2 tap holder wrenches, 2 die holder wrenches, 1 T-bar type tap wrench, and 1 carrying case.
• (Thread pitch gauge not included, but we recommend using these taps to light up threads from the bolt).

5 Piece NPT Thread Forming Taps Pipe Taps Set High-speed Steel Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads Size 1/8 1/4 3/8 1/2 3/4 in Storage Box

• ...ns in shallow cuts. Upgrade your pipe threading game today with our composite steel pipe taps set..
• Uncoated Tools for Versatile Use: Uncoated tools feature just the base substrate without any additional treatment or coatings. Our uncoated Pipe Taps Set are suitable for a wide range of applications, and the straight flute design allows chips to collect in the flutes as they cut..

uxcell M3 M4 M5 M6 M8 Hand Threading Tap Set High Speed Steel Straight Flutes Metric Thread Screw Taps Uncoated 5pcs

• Tap Size: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25. Straight flute design, clear threads with no burrs. Provide downward chip removal, and fast tapping with accuracy..
• Applications: Can make new threads or re-thread damaged or jammed threads. Tap most materials in through or blind holed conditions..
• Material: High-speed steel hand taps are with high hardness and toughness for wear resistance, well suited for general purpose applications..
• Coating: Uncoated taps feature just the base substrate without any additional coatings, and fit a wide range of applications..
• Tips: Hand taps are operated by tap wrenches. Suitable for drilling or tapping aluminum, die steel, mild steel, copper, hard plastics, etc...

Bridge (Construction) Reamer 1-5/16\ Magnetic Hex Shank Bridge Reamer