ReviewsHelix Angle Spiral Point Taps

uxcell Spiral Flute Taps M12 x 1.75 + 0.03 Metric Titanium Coated Cobalt High Speed Steel Machine Thread Milling Screw Threading Tap

Spiral Flute Taps: Thread Size: M12 x 1.75 + 0.03.
Square End Size: 7mm / 0.28". Spiral flute design, upward chip removal, fast tapping with accuracy. Titanium coating provides excellent corrosion resistance, improves wear resistance and hardness, and reduces the coefficient of friction..
Wide Applications: Suitable for processing blind holes and sticky materials. For tapping aluminum, die steel, stainless steel, bronze, plastics. Recommended feed rate: general steel: 6-15m/min.
cast iron: 8-10m/min. The torque caused by too fast feed speed is too large, which can easily cause the tap to break..
Special Design: Enlarge the tap to suit the workpiece that needs electroplating or sandblasting after tapping. According to the thickness of the coating, an amplification of 0.03-0.1mm is generally used. It has high hardness and toughness, wear resistance, heat resistance..
Easy to Use: Used on drilling and tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps. Machine taps are suggested to be used with tap collets with overload protection..
Tips: Prone to chipping or breaking due to speed overload or non-vertical tapping. Use the correct tapping too....

There are total 6 pieces of taps in different sizes from M3 to M10 that you can use for tapping various threads.
They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
Taps are designed with spiral flutes and the chip clearing process would be better.
These taps are made from high speed steel and surface finished by nitriding for high hardness and rust resistance.

This tap and drill bit set produces a thread that is strong and easy to tap.
High-carbon steel plug taps are great for general-purpose threading.
135° split-point drill bits give fast, precise drilling.
Set pieces: 6 – 32 NC, 8 – 32 NC, 10 – 24 NC, 10 – 32 NF, 12 – 24 NC and 1/4″ – 20 NC plug taps and 7/64″, 13/64″, #29, #25, #21 and #16 drill bits, plus a T-handle tap wrench.

- These taps are made from high speed steel 6542 and surface is coated with titanium for high hardness and rust resistance..
- There are total 9 pieces of taps in different sizes from M2 to M12 that you can use for tapping various threads..
- Taps are designed with spiral flutes is conducive to remove crumbs, not easily broken tap..
- They are used to cut new threads or repair damaged threads, you will have a smooth tapping experience with them..
- These HSS taps are great tools used to create screw threads, to cut or form the female portion of the mating pair..

High Speed Steel: These taps are made of high speed steel, which has high hardness and rust resistance, and is more accurate.
Spiral Grooves Design: The tap adopts a spiral grooves design, which has a better chip removal effect and a tapping experience..
6 Different Sizes: From M3 to M10, there are 6 different sizes of 1/4in hex shank taps for you to tap various threads.
Application: Used for drilling, tapping, chamfering, drilling holes in wood, copper, brass, aluminum, metal plates and plastics.
Fast Change Chuck: The pops up fast change chuck can be matched with the tap to work in hard reaches scenes. The installation is simple, convenient and practical.

[Item Contain]: 11pcs tragus studs earrings cartilage earrings studs helix earrings + 4pcs cartilage piercings jewelry + 1pcs helix daith jewelry clicker ring 1pcs spiral helix earrings hoop with a velvet pouch..
[Measurements]: Bar Thickness: 16 Gauge (1.2mm).
Wearable bar length and inner dia.: 1/4"(6mm), 5/16"(8mm) , ball size: 1/8"(3mm).
[Material]: Cartilage earrings studs and tragus earrings for women are made of 316L Surgical Steel. Hypoallergenic, Highly Polished Smooth Surface, Comfortable for long time wear..
[Using]: 16g earrings pack is used as cartilage piercing like cartilage earrings studs, tragus earrings for women, forward helix earrings studs, tragus jewelry, conch earrings studs.
16g studs can be used as lip ring, labret stud.
Clicker ring and be used as daith earrings, daith clicker ring.
[Feature]: Adorable tragus jewelry and cartilage earrings for women and men. Best gift for Birthday, Christmas Day, Anniversary Day, Valentine's Day, Wedding and more..

QUALITY STEEL - Our spiral gauges for ears are made of implant grade 316L Surgical Steel. This type of steel is CORROSION RESISTANCE , BIO-COMPATIBLE,....
EASY TO PUT IN – These spiral barbell earrings design offers pain free insertion and can be used in many different piercings. FEATURES : 14 gauge....
ELEGANT – These simple spiral ear piercing are shiny but not fussy and are ideal if you are looking for something understated yet beautiful. It is....
MULTI USES - You can use these spiral gauge kit for Cartilage, Eyebrow, Helix, Labret, Lobe, Nose, Pinna, Snake Bite, Spider Bite and more. However,....
WHAT WILL BE DELIVERED? - You will receive 2 pairs 4 pieces of 14g 1.6mm surgical stainless steel spiral barbell cartilage, 5/16 inch (8mm) diameters,....

Tube: Alphasyn Modified Cross-Linked Polyethylene (Modified XLPE).
Cover: Black corrugated abrasion-resistant Omegasyn EPDM with Red Spiral Stripe.
Reinforcement: Spiral-plied synthetic fabric with double wire helix.
Temperature Range: -40°F to 250°F (-40°C to 121°C).
2" x 20' Assembly Coupled CxE Stainless Steel.

Precision ground spiral groove for maximum drilling progress and tool life as well as excellent concentricity.
Made of high-speed steel (HSS) according to DIN 338 Right-hand cutting spiral groove type N, 118 ° point angle, Tapered section..

Product Name: CAIDU 5pcs HSS 6542 Titanium Coated Spiral Flute Metric Taps Set M3 M4 M5 M6 M8.
✔ Type Size: M3: 3 mm * 0.5 , M4: 4 mm * 0.7 , M5: 5 mm * 0.8 , M6: 6 mm * 1 , M8: 8mm * 1.25.
✔ Material: HSS 6542 Titanium coating, cutting will not be left. Have good machinability. High hardness, fast cutting, wear high temperature.
✔ Spiral groove is reduced to remove crumbs, not easily broken tap. Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and Sticky materials processing.
✔Applicable Workpiece: tensile strength 750N / mm 2 or less the low-carbon steel, copper, aluminum, hardwood, plastic.