ReviewsHermetic Wire Assembly

WORLDS BEST CABLES 1 Foot – Audiophile High-Definition Audio Interconnect Cable Pair Custom Made Using Mogami 2497 Wire and Eminence Gold Locking RCA Connectors

  • This is a custom built cable assembly, by WORLDS BEST CABLES (WBC). This cable assembly is made using the Mogami 2497 wire and Eminence Gold Locking....
  • The brand of wire we used for this custom cable assembly: Mogami, one of the most sought after Pro cable brands, preferred by major recording studios....
  • The brand of connector we used for this custom cable assembly: Eminence DWA-337 Audiophile Locking RCA connectors: 3 Micron thick Gold plating to....
  • All our bespoke cables are professionally soldered using WORLDS BEST CABLES proprietary 4% silver solder blend & a nitrogen-assisted soldering process....
  • These are custom made cables lovingly assembled by WORLDS BEST CABLES, we offer the largest array of custom built cables in the market, we carry all....
Check Stock

6 Foot – Quad Balanced Microphone Cable Custom Made by WORLDS BEST CABLES – Using Mogami 2534 Wire and Neutrik NC3MXX-B Male & NC3FXX-B Female XLR Plugs.

  • This is a custom built cable assembly, by WORLDS BEST CABLES (WBC). This cable assembly is made using the Mogami 2534 wire and Neutrik NC3MXX-B Male &....
  • The brand of wire we used for this custom cable assembly: Mogami, one of the most sought after Pro cable brands, preferred by major recording studios....
  • The brand of connector we used for this custom cable assembly: The NC3MXX-B is the latest and the highest-end Male XLR offering by Neutrik....
  • The brand of connector we used for this custom cable assembly: The NC3FXX-B is the latest and the highest-end Female XLR offering by Neutrik....
  • Custom Made 6 Foot long cable professionally soldered using WBC's proprietary 4% silver solder blend & a nitrogen-assisted soldering process unique to....
Check Stock

Signaworks LED 3 Light Steady Andon Tower Light Kit - Parts Only, Assembly Required - 2 Position Switches for On/Off - Stack Light…

  • SIGNAWORKS LED SUPER BRIGHT ANDON TOWER LIGHT ASSEMBLY KIT - This Kit has all the Parts for you to Build a Highly Visible, Red/Amber/Green LED Andon Tower Light with three 2 position switches to turn each light Off or On Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
  • CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, Three 2 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
  • SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable in case of da....
Check Stock

GZ GUOZHI 200A MIG Welder, 110V/200V Dual Voltage 6 in 1 Stick Welder/Gas MIG/Gasless Flux Core MIG/Lift TIG/Spot welding/Spool Gun Multi-Process Welding Machine with Dual LED Digital Display

  • ...wire test/gas test functions, with spool gun connector, can weld with a spool gun..
  • 【Dual-Voltage & High-Quality Accessories】: 90V-260V wide-voltage design, unafraid of the voltage fluctuations, 115V/230V Dual-Voltage automatic conversion. Included: 13-feet MIG Gun Assembly, 10-feet 500A Electrode Holder Assembly, 10-feet 500A Work Clamp Assembly, ф0.03" Flux Core Wire and ф0.03" solid wire, etc. High-quality accessories, durable and not easy to damage..
  • 【Safety Guarantee & Portable Design】: Welder machine with Over-heating protection, Over-current protection and over-loading protection, use more safety, quality more assured. The ARC welding has anti-stick function and VRD function,Excellent Arc starting stability , Safe and Secure..
Check Stock

15 Foot - Coaxial Audiophile Speaker Cable Pair Custom Made by WORLDS BEST CABLES – Using Mogami 3082 Wire & Eminence Gold Plated Banana Plugs 2 Plugs on Each end

  • This is a custom built cable assembly, by WORLDS BEST CABLES (WBC). This cable assembly is made using the Mogami 3082 wire and Eminence Gold Banana....
  • The brand of wire we used for this custom cable assembly: Mogami, one of the most sought after Pro cable brands, preferred by major recording studios....
  • The brand of connector we used for this custom cable assembly: Eminence 24k, 3 micron Dual Gold Plated 4mm (standard diameter) Audiophile-Grade Banana....
  • All our bespoke cables are professionally soldered using WORLDS BEST CABLES proprietary 4% silver solder blend & a nitrogen-assisted soldering process....
  • These are custom made cables lovingly assembled by WORLDS BEST CABLES, we offer the largest array of custom built cables in the market, we carry all....
Check Stock

12 Foot - Coaxial Audiophile Speaker Cable Pair Custom Made by WORLDS BEST CABLES – Using Mogami 3082 Wire & Eminence Gold Plated Banana Plugs 2 Plugs on Each end

  • This is a custom built cable assembly, by WORLDS BEST CABLES (WBC). This cable assembly is made using the Mogami 3082 wire and Eminence Gold Banana....
  • The brand of wire we used for this custom cable assembly: Mogami, one of the most sought after Pro cable brands, preferred by major recording studios....
  • The brand of connector we used for this custom cable assembly: Eminence 24k, 3 micron Dual Gold Plated 4mm (standard diameter) Audiophile-Grade Banana....
  • All our bespoke cables are professionally soldered using WORLDS BEST CABLES proprietary 4% silver solder blend & a nitrogen-assisted soldering process....
  • These are custom made cables lovingly assembled by WORLDS BEST CABLES, we offer the largest array of custom built cables in the market, we carry all....
Check Stock

Signaworks LED 5 Light Steady & Flashing Andon Tower Light Kit - Parts Only, Assembly Required - 3 Position Switches for On/Off Operation - Stack Light…

  • SIGNAWORKS LED SUPER BRIGHT ANDON TOWER LIGHT ASSEMBLY KIT - This Kit has all the Parts to Build a Highly Visible, Red/Amber/Green/Blue/White LED Andon Tower Light with five 3 position switches to turn each light On-Off-Flash Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
  • CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, Five 3 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
  • SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable in case o....
Check Stock

Signaworks LED 3 Light Steady & Flashing Andon Tower Light Kit - Parts Only, Assembly Required - 3 Position Switches for On/Off Operation - Stack Light…

  • SIGNAWORKS LED SUPER BRIGHT ANDON TOWER LIGHT ASSEMBLY KIT - This is a Kit of all the Parts for you to Build a Highly Visible, Red/Amber/Green LED Andon Tower Light with three 3 position switches to turn each light On-Off-Flash Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
  • CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, three 3 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
  • SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable in cas....
Check Stock

Signaworks LED 4 Light Steady & Flashing Andon Tower Light Kit - Parts Only Assembly Required - 3 Position Switches for On/Off Operation - Stack Light…

  • SIGNAWORKS LED SUPER BRIGHT ANDON TOWER LIGHT ASSEMBLY KIT - This Kit has all the Parts for you to Build a Highly Visible, Red/Amber/Green/Blue LED Andon Tower Light with four 3 position switches to turn each light On-Off-Flash Independently. This is an Economic Solution for Budget Minded Facilities to have Custom Andon Lights Stations, including Direct Wire, Extended Cable, Conduit, etc. These parts can build an Andon Light with Stack Light with a pole attached to a switch box and power cord..
  • CUSTOMIZABLE ANDON PARTS KIT INCLUDES: Bright LED Tower Light 110VAC, 10" Threaded Pole w/ Mounting Nuts, Right Angle Mounting Bracket, Selector Switch Box with Color & Switch Operation Labels, Drilled Holes for Light, Power Cord, Four 3 Position Switches with N.O. contacts, 3 Prong Power Cord, Cable Gland, Butt Splices, Terminal Connectors & Wiring Instructions. DOES NOT INCLUDE (Required): electrical knowledge/aptitude, screwdriver, wire stripper/cutter, wrenches, multimeter, crimper..
  • SUPER BRIGHT, LONG LASTING LED ANDON STACK LIGHT - Using Super Bright LEDs with Long LED Life, the Highly Visible Signal Light provides LED Lighting Over the Full Surface of the Lens Section (Not like other cheap, spotty LEDs or replaceable bulbs). Lenses are replaceable....
Check Stock

Meet perfect 6-Shelf Adjustable Wire Shelves on Wheels, Heavy Duty 6 Tier Storage Shelving Unit(350lbs Capacity Per Shelf with Feet), Metal Steel Organizer Wire Rack- Black(48L x 18W x 82H w/Casters)

  • ...e storage rack is 82"x48"x18". The metal frame is large enough to hold a lot of things, the shelving unit is a good helper to keep the space clean and tidy, you can freely adjust the height of each garage rack. Unit rack storage shelf metal wire.
  • ♧【Easy to Assemble】：Storage shelf design is simple enough that assembly is very easy, no assembly tool is needed when you assemble the Metal Rack, Wire Shelving Unit can handle quickly even you assemble it alone. Metal shelf unit storage rack wire.
  • ♧【Commercial Casters】: The flexible wheels make storage shelf easy to move the whole metal rack quick for cleaning the floor around the wire shelving unit, even with the fully stocked, If you want it to be fixed in one place, it can meet your requirements. Because it have a stationary device. Rack wire shelf storage unit metal.
  • ♧ 【Multipurpose shelves】:✔a good choice to store kitchen appliance or dry food.
  • ✔hold books, other knick-knacks in living room.
  • ✔put it in the garage to storage stuff.
  • ✔A plant stand for indoor garden. Metal shelf unit storage rack wire..
Check Stock

Partsam High Mount Led 3rd Brake Light Red Replacement for Silverado and Sierra 1994-1999 C/K 1500 2500 3500 Rear Top Roof Cab Center Mount Third Brake Light Stop Tail Cargo Light Lamps

  • This Red Lens Chrome Housing third brake light assembly is specifically engineered to match the design and performance of the high mount stop light on 1994 1995 1996 1997 1998 1999 Silverado Sierra C/K 1500 C/K 2500 C/K 3500, 2000 Silverado Sierra C/K 2500 C/K 3500 [2-Door Regular Cab | 3/4-Door Extra Cab | 4-Door Crew Cab]. Note: Compatible on Models w/ Cargo|Stop 3rd Brake Lights Only.
  • Reliable Material: PC designed full linked boards ensure longer lifetime and high quality brake lights made by OEM approved manufacturers with materials that meet strict OEM requirements.
  • high-density Rubber mounted back ensures impact resistance in and prevent water leaking.
  • Part Number: 16521970, 16522433, 16520063, 16522434.
  • High Quality Chrome Housing with Reinforced Polycarbonate Red Lens.
  • Wire Connection Tips: Yellow Wire (negative) + Red Wire (Positive), Red light works.
  • Black Wire (negative) + White Wire (Positive), White light works.
  • NOTE: this brake light is plug and play. If yours does not come with the plug, please just cut the plug to wire, thanks.
  • High quality, precise fit and safety compliant: Just input your specific year, make, model and trim in Amazon Garage to ensure this part fits your exact ....
Check Stock