ReviewsHex Bore Coupling

5pcs M8 x 1.25 x 35mm Stainless steel Long Coupling Hex Nut Connector

  • 1/4-28 X 7/8" long, fine threads, 3/8" across the flats steel coupling nut with zinc finish.
  • Coupling nuts are threaded fasteners for joining two male threads, most commonly threaded rod.
  • Zinc plate over steel - more rust resistant.
  • Coupling Nuts are used to make up long rod assemblies from shorter lengths of rods.
Check Stock

Heyiarbeit 3mm to 3mm Single Steering Shaft Universal U Joint, Universal Joint Coupling Connector 2Pcs

  • [MATERIAL] - Universal joint shaft coupling is made of high quality brass, which is strong, wearproof, and durable.
  • [FEATURE] - Provides torque transmision and alignment, cost effective coupling design, which is very flexible and easy for use.
  • [FUNCTION] - Shock mitigation, noise reduction.
  • when the rated torque is exceeded, the coupling can protect the safety of the linkage.
  • [APPLICATION] - The universal joint coupling is compatible with straight shaft motors, and it is used for model cars, model ships, robots and other types of metal transfer.
Check Stock

Heyiarbeit 3mm to 4mm Single Steering Shaft Universal U Joint, Universal Joint Coupling Connector 2Pcs

  • [MATERIAL] - Universal joint shaft coupling is made of high quality iron, and then electroplated, much stronger, wearproof, durable to use.
  • [FEATURE] - Provides torque transmision and alignment, cost effective coupling design, which is very flexible and easy for use.
  • [FUNCTION] - Shock mitigation, noise reduction.
  • when the rated torque is exceeded, the coupling can protect the safety of the linkage.
  • [APPLICATION] - The universal joint coupling is compatible with straight shaft motors, and it is used for model cars, model ships, robots and other types of metal transfer.
Check Stock

Guuun Ruger Mark IV 22/45 Lite Grips G10 Fits Ruger 22 45 Lite Generation 4 Rimfire Pistol NOT for Gen 3, OPS Eagle Wings Diamond Texture - Grey/Black

  • Includes 1 Dozen .22 Cal. Rimfire Rifle bore brushes packaged in a zip closure bag.
  • Brass Core and Bronze Bristles (Benchrest Type) designed for competition shooters to withstand frequent use.
  • Construction consists of a high quality brass core and coupling with bronze bristles.
  • Our specifically designed bore brush for each Cal./mm brush is sized to make cleaning faster & easier and aid in extended brush life.
  • This bore brush is exceptional for bore cleaning with superior cleaning ability and it will not harm the bore.
Check Stock

Chain Coupling Sprocket, Bore 1 in

  • Price For: Each Setscrew: Yes Max. Number of Teeth: 16 HP Rating @ 100 RPM: 0.90 Pitch: 40 Bore Type: Fixed Material: Steel Temp. Range (F): -25 Degrees - 150 Degrees Item: Chain Coupling Sprocket End Float Tolerance (In.): 0.060 Bore Dia. (In.): 1 Width (In.): 0.8750 Angular Misalignment Tolerance: 3 Degree (10T-19T), 1/2 Degree (20T-24T).
  • Max. Parallel Misalignment (In.): 0.0050 Outside Dia. (In.): 3.000 Keyway: 0.250 x 0.125 Country of Origin (subject to change): United States.
Check Stock

FTG USA Countersink Drill Bit Set 3 Pc #10 (3/16') Wood Countersink Drill Bit Same Size Set Countersink Tapered Countersink Bit, Quick Change Shank, 1 Hex Wrench, Woodworking Countersink Drill Bits

  • Countersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 3 Piece drill set All Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2348 drill bit set hex shank.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
Check Stock

Martin 5018 Coupling Cover, Nylon, Inch, 5.125\ OD, 2.625\ Length

  • For use with Martin taper bushed, QD and stock, and finished bore roller-chain style couplings (sold separately).
  • Nylon for corrosion resistance, low friction, and minimal additional weight to the coupling.
  • Synthetic rubber seals along the bore keep lubricants contained and keep contaminants out.
  • Two halves to facilitate installation, and has gaskets between the halves to prevent lubricant leakage or debris intrusion between the halves.
Check Stock

Bore Brush Bronze Bore Brush Bore Cleaning Brush Set Wire Bore Brush Set Stainless Steel Cleaning Brush for Power Drill Impact Driver 12 Pieces,Multi Sizes

  • What will receive: there are stainless steel cleaning brushes and brass cleaning brushes with different sizes, all of them have 1/4 inch hex shank,....
  • Scientific design: bore brush offers easy access into narrow holes and confined areas, designed for use on right angle grinders.
  • Quality material: bore cleaning brushes are made of stainless steel and brass copper, strong and sturdy, can clean rust and detail completely.
  • Specification details: the drill wire brush is 1/4 inch hex shank fits for power drills, impact drivers, die grinders, the overall length is 4-3/4....
  • Multiple application: you can keep wire bore brushes in your car, garage, office and kitchen, and the bore brushes are suitable for cleaning,....
Check Stock

FTG USA Countersink Drill Bit Set 6 Pc #10 (3/16') Wood Countersink Drill Bit Pro Pack Countersink Set, Tapered Countersink Bit, 1 Stop Collar, Hex Wrench, Woodworking Countersink Drill Bits

  • Countersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 6 Piece Pro drill set Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Depth Stop Collar 3/8", 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2350P counter sinker drill bit for wood.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits desi....
Check Stock

Nylon Sleeves, Type M-28, 34-Teeth, M-Style, Flexible Shaft Couplings (1 Each)

  • For use with Martin taper bushed, QD and stock, and finished bore roller-chain style couplings (sold separately).
  • Aluminum provides corrosion resistance and minimal additional weight to the coupling.
  • Synthetic rubber seals along the bore keep lubricants contained and keep contaminants out.
  • Two halves to facilitate installation, and has gaskets between the halves to prevent lubricant leakage or debris intrusion between the halves.
Check Stock

This is Not A Drill Funny Carpenter Woodworking Mens T-Shirt

  • FTG 4TO12P has Bits Secured with Pin. Drill bits designed as reliable woodworking tools. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Countersink drill bit set for wood with tapered drill bit, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • Bits Secured with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood....
Check Stock