ReviewsHex End Mills

Tonsiki Ball End Hex Bits & Screwdriver Handle Set, Magnetic 1/4'' Hex Shank Ball End Hex Head Allen Wrench Screwdriver Bits with Quick Release Screwdriver Holder Handle

【HIGH QUALITY S2 STEEL】Ball end hex bits are made of excellent industrial grade S2 steel material for superior hardness which it's reaches 61RCH, ball end allen bit set be Nickel plating treatment by surface, for good anti-rust and anti-corrosion funcitons. It will not be rust and keep the gloss even if exposed to the air for a long time, which is more stronger and durable than others..
【STRONG MAGNETIC】Ball End bits built-in magnetic, can be easily keep screws stuck to them, the hex socket of quick release handle also come with magnetic, perfect match with the ball end screwdriver bits, the quick-release chuck enables rapid bit change without needing any special tools..
【9 PROFESSIONAL METRIC SIZES】 Ball end hex screwdriver bit set with 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm. Each Size is was laser measured for a perfect size measurement! It can get the job done quickly which match with our screwdriver handle..
【BALL END DESIGN】Can tighten the screw in vertical or inclined side, suitable for limited space. All the ball end hex bit set packed in a plastic screwdriver holder storage bar, for convenient to store and carry..
【WIDE APPLICATIONS】This ball end hex screwdriver bit handle set can be used to repair cars, motorcycles,....

Check Stock

JAINGU 1pc T Slot Milling Cutter 4-12mm Shank 4 Flute Carbide End Mills for Metalworking T Slot Keyseat Router Bits CNC Milling Cutter-1pc 6x2x3x9.5x50

Package Including:1pc 4 Flute T Type End Mills.

Check Stock

14mm Hex Key,Autuwintor,l-Shaped Hex Key Wrench,Silver,Pack of 4

Package Content---4 pcs of 14mm hex key wrench including..
This hex key allen wrench is made of durable 45# steel with galvanized finish,which has strong strength and rust resistance..
Widely Application---To loose or tight the screws,suitable for you to keep a set of l shaped hex wrench. You can use it for furniture,machinery,bicycles,motorcycles,etc...
Total Size--- 14mm/0.55" Metric Hexagon Head.
Long Arm & Short Arm ---The hex key offers extended range on one end & extra leverage on the other end.Choose which end to use according to your needs.

Check Stock

OSCARBIDE Indexable End Mill R8 Shank,1''Cutting Diameter,5-9/16\Overall Length,2 Flute with 2 Pieces TPCN1103PDTR(TPCN22PDTR) Carbide Inserts

Carbide Indexable End Mills,1" Cutting Diameter, R8 Shank,TPG22 inserts.Overall Length 5-9/16”.
Tin coated carbide turning milling TPG22 inserts,last longer and can run at faster speeds than uncoated ones..
When a cutting edge becomes dull, you just need to rotate the insert in the holder to use the sharp edge..
Indexable End Mills Positive rake 90°, right-hand cut.Reduces cutting forces,Maximum rigidity.
Used for slotting and peripheral milling.

Check Stock

Niagara Cutter - SP205-0.500-D2-S.3-Z2 17011645 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 35 Degree Helix, 2 Flutes, 3' Overall Length, 0.500' Cutting Diameter, 0.500' Shank Diameter

2 Flute design makes these ideal for plunge cutting when chip removal is not a problem.
General purpose end mill for working on all types of materials.
Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.
Uncoated end mills feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Center Cutting End Mills are designed with "End Teeth" making these ideal for applications such as profiling, pocket and slotting.

Check Stock

CNC Router Bits 1/8' Shank Ball Nose Carbide End Mill Two Flute CNC Spiral Bits Upcut Cutter 3.175mm Carbide End Mill for Alloy Steels/Hardened Steels 10pcs (3.175x32x55mm)

DIMENSIONS: 1/8" (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 1/2"(12mm). Overall length, 1-1/2"(38.5mm)..
Range of processing：Ball end mills can mill die steel/cast iron/carbon steel/alloy steel/tool steel/ general iron. Ball nose milling cutters can work normally in high temperature environments..
High efficiency：Ball nose carbide end mill is a double-blade with helical design, and the large and uniform pin-out groove is conducive to high-speed machining. The sharp double edge can effectively improve the cutting efficiency of the tool..
Perfect cutting：The ball mill design of the double-blade ball end milling cutter effectively reduces the burr and increases the wear resistance of the tool..
Ball Nose End Mills are Suitable for Side Milling, End Milling, Finish Machining, etc..

Check Stock

22mm Hex Key,Autuwintor L Shaped Allen Wrench Set,Short Arm Hex Key Set,Silver,Pack of 1

Package Content---1 pcs of 22mm hex key wrench including..
This long arm hex key set is made of durable 45# steel with galvanized finish,which has strong strength and rust resistance..
Widely Application---To loose or tight the screws,suitable for you to keep a set of l shaped hex wrench. You can use it for furniture,machinery,bicycles,motorcycles,etc...
Total Size--- 22mm/0.87" Metric Hexagon Head.
Long Arm & Short Arm ---The hex key offers extended range on one end & extra leverage on the other end.Choose which end to use according to your needs.

Check Stock

Titan Attachments Auger Extension 48' Solid Steel 2' Hex Male 2' Hex Female

Compatible with 2" Hex Drive Units and Auger Bits.
Extend your auger bits for deeper holes or hard to dig areas..
Weight: 68 lbs. Female end: fits 2" Hex Male end: 2" Hex Overall Length: 48" Material: Steel.

Check Stock

Allen's Wrench (Live at Bronson)

WORK FASTER: Slide the T-handle to the center position, hold the free-spinning sleeve on the shaft and tighten or loosen those hex head screws at light speed. Slide the T-handle to the end position and cinch that screw down..
REACH FARTHER: The 10 mm wrench has an 11 inch reach. At the other end of the spectrum, the 2mm wrench offers 4-1/2 inches of reach. And every size in between offers way more reach than L-type hex keys..
GRIP HARDER: You'll love the positive grip and precise fit the friction-treated hex tips offer. That means less chance of rounding and cam-out..
KEEP IT TOGETHER: These sweet wrenches will never be far out of reach with the included storage rack. Hang it on your tool wall, toss it in a toolbox drawer or set it on your benchtop for easy access.
GO BIG OR GO SMALL: The set includes 2, 2.5, 3, 4, 5, 6, 8 and 10 mm hex key wrenches to fit the most common metric hex cap screws.

Check Stock

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3\ Overall Length, 0.125\ Cutting Diameter, 0.125\ Shank Diameter

Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
Four flutes produce a better finish than fewer flutes.
Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.

Check Stock

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4\ Overall Length, 0.1875\ Cutting Diameter, 0.1875\ Shank Diameter

Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
Four flutes produce a better finish than fewer flutes.
Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.

Check Stock