ReviewsHex Flange Nut

MTD 712-0417A Hex Flange Nut 5/8-18- 3 Pack

  • Known as Hex Flange Nuts, Flange Lock Nuts, Spindle Nuts, Blade Lock Nuts, this nuts are used to secure a blade to the spindle.
  • Work with MTD, Craftsman, Troy Bilt lawn mowers & tractors. Had been tested and confirmed to work with LT1040 LT1042 LT1046 LTX1040 mower deck spindles.
  • Replace the part# 712-0417, 712-0417A, 912-0417, 912-0417A, 753-05549, 112-0330.
Check Stock

Angle Grinder Spanner Wrench 12 pcs Angle Grinder Flange Nuts with 2 pcs Spanner Angle Grinder Flange Replacement for Makita Ryobi Dewalt Milwaukee Craftsman

  • ★Return your hand-held power grinder to its full operating capacity with this angle grinder flange nut for 5/8.
  • ★14pcs include: 6 x inner angle grinder flange nuts, 6 x outer angle grinder flange nuts and 2 spanners.
  • ★The Angle Grinder Spanner wrench is approx. 5.5”/ 140mm length, and for the flange nut, the outer diameter is 0.55”/14mm, the inner diameter is....
  • ★The grinder angle spanner wrench flange nut kit is made of carbon steel, durable and stable.
  • ★NOTE: All grinders are different, all brands have different size grinders, look over your grinder and find the info on the tool, find the size for....
Check Stock

Glvaner M8-1.25 x 30mm Length (15 pcs) Alloy Steel Flanged Washer Head Hex Bolts, Extra-Large Washer Head, 10.9 Grade Black Oxide Finish GB5789 Full Thread

  • Screw Length: 30mm (measured from under the head).
  • Material: 10.9 Grade alloy steel and Black Oxide Finish GB5789, greater strength than stainless steel and provide good corrioion resistant in dry environment..
  • The extra large washer head helps to distribute the load. The one-piece design eliminates the need of a separate washer and can be more efficient and easier to use. A washer is still needed on the nut side. You could also easily find the stainless steel flange nuts in our store..
Check Stock

HVAZI Metric M2 M2.5 M3 M4 M5 Nylon Phillips Pan Head Screws Nut Washer Assortment Kit (Black)

  • High Quality 510PCS Metric M2 M2.5 M3 M4 M5 Black PA66 Nylon Phillips Pan Head Screws Hex Nut Flat Washer Assortment Kit.
  • Thread Diameter: M2/(2mm) with Thread pitch: 0.4mm.
  • Screw thread: M2.5/(2.5mm) with Thread pitch: 0.45mm.
  • Screw thread: M3/(3mm) with Thread pitch: 0.5mm.
  • Thread Diameter:M4/(4mm)with Thread pitch: 0.7mm.
  • Thread Diameter:M5/(5mm)with Thread pitch: 0.8mm.
  • The assortment contains:M2x5mm(20PCS),M2x8mm(20PCS),M2 Hex Nut (40PCS),M2 Flat Washer(40PCS).
  • M2.5x6mm(20PCS),M2.5x10mm(20PCS),M2.5 Hex Nut (40PCS),M2.5 Flat Washer(40PCS).
  • M3x6mm(20PCS),M3x10mm(20PCS),M3 Hex Nut (40PCS),M3 Flat Washer(40PCS).
  • M4x8mm(15PCS),M4x10mm(15PCS),M4 Hex Nut (30PCS),M4 Flat Washer(30PCS).
  • M5x10mm(10PCS),M5x20mm(10PCS),M5 Hex Nut (20PCS),M5 Flat Washer(20PCS).
  • All products are made of durable nylon, Strong,anticorrosive.
  • Type specification complete, the quality is reliable,Easy to install and durable to use.
Check Stock

High Pressure Handheld Shower Heads 5 Spray Settings High Flow Shower Head with 60\ Stainless Steel Long Hose,Adjustable Bracket,Chrome

  • ...le-adjustable bracket allows you adjust the angle and direction as you like. 58" stainless steel hose with chrome finish resists corrosion and tarnishing..
  • 【What’s in the Package】: The 5-functions high pressure handheld shower head, 60" stainless steel hose, adjustable overhead bracket, standard shower arm and flange..
  • 【Easy Connection】: G 1/2 thread fits all US standard shower pipe. Rubber washers has been preinstalled in the end of hose. Install easily within 10 minutes without plumber. Note:Conical nut (long hose nut) should be connected with the shower head, Hex nut nut(short hose) should be connected with the shower bracket. Please connect the right end of the hose..
Check Stock

Heavy Duty Garage Door Reinforcement Bracket Kit for 16FT Garage Door - Adds Strength and Rigidity Increasing The Overall Life of Your Garage Door

  • (2) 7′-11″ x 2-1/4″ 22 Gauge Galvanized Steel Struts for 16′ wide door..
  • (12) #8 1/2 in. External Hex Flange 7/16″ Hex-Head Self-Drilling Screws.
  • (10) 1″ External Hex Flange 7/16″ Hex-Head Self-Drilling TEK SCREWS (Installation).
  • Assembly instructions and helpful hints included.
  • Will work on a large variety of steel & wood section garage doors. Not compatible with Wayne Dalton Models 8100 & 8200 Garage Doors.
Check Stock

M10-1.5 Serrated Flange Hex Lock Nuts, 304 Stainless Steel 18-8, Bright Finish, Full Thread, Pack of 10

  • Nut Type: Metric Serrated Flange Hexagon Nuts 10 PCS External Hex Drive Size: 15mm.
  • Thread Coverage: Full Thread Coarse Thread UNC.
  • Diameter of the washer head: 21.8mm (max).
  • Made of 304 stainless steel 18-8 (no coating outside) which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments..
  • Serrations help grip the material surface for easy installation and provide mild vibration resistance..
Check Stock

Toolly 180PCS M6 Bolts Nuts Kit Furniture Bolt Crib Screws Kit Hex Socket Head Cap Screws Nuts Barrel Bolt Nuts for Crib Bunk Bed Cot (M6×20mm - M6×80mm)

  • 【Package includes】 Including 66 M6 bolts (7 sizes) and 120 M6 nuts (30 insert nuts, 60 barrel nuts, 30 flange nuts) and 2 hex wrench..
  • 【Wide application】 Suitable for cribs, bunk beds, cabinets, tables, chairs, cribs and other furniture. It is also the perfect choice for connecting wooden boards, workbenches, headboards, cabinets and other furniture.
  • 【High quality】 This crib screw set is made of high-speed galvanized metal, which is abrasion-resistant, rust-resistant..
  • 【Easy to Install】 This kit are packed in a portable transparent storage box. Convenient for your storage and carrying on..
  • 【Hexagon Wrench Is Included】 Hexagon socket screw nut thread m6 set conforms to the standard metric system, and the complimentary hex wrench is convenient for you to complete the work excellently..
Check Stock

3.0 Inch 2 Bolt Exhaust Flange Connection Kit Stainless Steel Exhaust Flange and Gasket with 2 Bolts& Nuts 3.0"(77mm)

  • 2-Bolt Exhaust Flange Connection Kit.It is Including 1 Pcs 3.0 Inch Flange , 1 Pcs 3.0 Inch Gasket, 2 Pcs of M10*40mm Flanged Hex Head Bolts, 2 Pcs of Flange Hex Nuts.
  • 3.0" Hole Size: The Hole Size is 3.0 Inch(77mm).it is Pefect fitting Exhaust Pipe/Downpipe Which is the Pipe outside diameter 3.0 Inch(75-76mm).
  • With Oval Hole: Bolt to Bolt distance is 3.6- 5.1 inch (92~130mm),The Slotted Hole munch better to facilitate pipe connection..
  • Stainless Steel Material: The 2 bolt 3.0 " Exhaust Flangle material is made with Stainless Steel 201 provide good strength and corrosion resistance.
  • Exhaust Flange.it is good design to reserve about 3mm thickness for welding port..
Check Stock

Prime-Line 9094921 Flange Nuts, Class 8 Metric, M8-1.25, Zinc Plated Steel, (10-pack)

  • - Package Content: 6pcs x Hex Flange Nuts.
Check Stock

Multi-function 7mm-19mm Ratchet Universal Sockets Metric Wrench Power Drill Adapter Set and 105 Degree Right Angle Extension Power Screwdriver Drill Attachment 1/4\ Drive 6mm Hex Magnetic Bit

  • ...cordless screwdriver, max torque: 10n/m.105 degree right angle head, designs for tight spaces, extends the power of a cordless screwdriver.Extends power of cordless screwdrivers-100 in/lbs. torque, 400 RPM..
  • 105 degrees angle extension, in which you use when you have hard places to get to,360 degree adjustable thumb flange.It can connect hand drill and manual wrench.The function head is equipped with a locking and magnetic device, to ensure that the sleeve does not fall.Built-in strong magnet for good holding power, accepts all 1/4" standard hexagon shank bits.Apply to all electric drill and socket wrench, which allows to reach unreachable or tight spaces..
Check Stock