ReviewsHex Rethreading Die

Howards End

  • PRECISE MATING OF LOCK RING: Easy-to-use cross bolt connects the two ends of the ring instead of a traditional screw design that tightens directly into the threads of the die, resulting in a more precise mating of the lock ring threads to the die threads..
  • RELIABLE ALIGNMENT: Full size lock ring provides a more reliable alignment with no canting, and no damage to the die threads, which remain undamaged..
  • EASY ADJUSTMENT: Tightening or loosening the steel cross bolt screw requires only a 7/64″ Hex/Allen Key (not included)..
  • STANDARD FIT: The Forster Cross Bold Die Lock Rings fit standard 7/8″-14 thread dies from most manufacturers..
  • FOR FORSTER SEATER & SIZING DIE: Works with all Forster Products high-quality sizing and seater dies. The Forster DIE-G-10 is a direct replacement part for the lock rings on Forster sizing and seater dies..
Check Stock

Ryobi P241 One+ 18 Volt Lithium Ion 130 Inch Pounds 1,100 RPM 3/8 Inch Right Angle Drill Battery Not Included Power Tool Only

  • The angle extension gears are mounted in a die cast with 3 durable ball bearings. Strong bulid-in magnetic socket holds standard hex drilling and....
  • 105°Angle Extension 1/4inch 6mm Hex Drill Bit Screwdriver Socket Holder Adaptor, 1/4 inch hex drive shaft is quick change compatible and fits most....
  • Right angle driver made of Chrome Vanadium steel, high hardness angle drill bit holder, anti rust. durable die cast body with 3 ball bearings for long....
  • 105 degrees angle extension, in which you use when you have hard places to get to,360 degree adjustable thumb flange.It can connect hand drill and....
  • Warranty: We believe in our products there for we offer a 60 day money back guarantee along with a 12 month replacement warranty for this high quality....
Check Stock

Machine Tap 1/2\-13 UNC Thread Pitch 4 Flutes, High Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, HSS Machine Screw Plug Tap

  • ...or professional machinists and DIY weekend warriors alike to rethread existing auto and machinery fasteners, remove screws/bolts, cut raw material.
  • Tap wrench fits the different sizes of taps, thread taps are used to process internal thread, thread die set is for external thread, plug taps suitable for cleaning and rethreading.
  • FITS YOUR APPLICATION: Metric – Taper taps (2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
  • EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm....
Check Stock

Powerwerx TRIDIES Interchangeable accessory die sets for the TRIcrimp Powerpole crimping tool

  • Expand the functionality of your TRIcrimp tool with these additional die sets.
  • Easily crimp OEM-T, HF/VHF connectors, SB50/PP75 contacts, hex crimp for various coaxial cable connectors, non-insulated terminals, insulated terminals, end sleeves and more.
  • This 6 die set package contains 6 Interchangeable accessory die sets for the TRIcrimp tool listed blelow.
  • TRIcrimp die sets will not fit or work with any other brand of tool.
Check Stock

Amazon Basics 3/8-Inch Drive Long Hex Bit Socket Set - 18-Piece

  • The 3/8 inch drive long hex bit socket set was designed to tightening and removing hard to reach hex nuts, It includes 8-pc inch hex bits: 1/8, 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 3/8 inch.
  • and 10-pc metric hex bit : 3, 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10 mm.
  • The hex bit sockets are constructed of high-grade S2 steel bit and Chrome-Vanadium alloy steel socket, which is permanent connected and can't loosen over time.
  • 6-sided hexagonal tip offers an exact fit with hex fasteners.
  • All the socket on bits are 3/8 inch drive and with 4 detent grooves ensure a secure connection with 3/8 inch drive ratchet for high leverage and fast operation.
  • Easy-to-read die-stamped size markings won't wear off and make it simple to find the right size fast.
  • Product dimensions: 10.6 x 6.6 x 2.4 inches (LxWxH).
Check Stock

Craftsman 75 pc Inch & Metric tap and die Set

  • Combines inch and metric sizes in 1 convenient kit.
  • Set includes: 7 drive tools with accessories, 17 inch plug taps, 17 inch hex dies, 17 metric plug taps, 17 metric hex dies & sturdy storage case with handle.
  • Hardened, precision-ground and polished carbon steel surfaces make chip removal easy.
  • Hex-shaped dies permit use of sockets and wrenches as well as die stocks.
  • Rust-resistant satin finish for smooth cuts with less friction.
Check Stock

GEARWRENCH 114 Pc. Ratcheting Tap and Die Set, SAE/Metric - 82812 & 84 Pc. 1/4', 3/8' & 1/2' Drive Bit Socket Set, Hex/Ball End Hex/Tamper Proof Torx/E-Torx/Torx, SAE/Metric - 80742

  • Product 1: Ratcheting T handles wind Dies with a 5° swing arc and have a reversing lever to eliminate hand over hand turning.
  • Product 1: Twist lock guide system reduces the “walk back” of the die guide and keeps the dies centered while cutting.
  • Product 1: Die adapters work on round and hex shaped Dies.
  • Product 1: Die adapters work with the 3/8" Drive pass thru ratchet and socket system as well as socket Accessories.
  • Product 2: Large hard stamped size identification.
  • Product 2: Heat treated socket bases for durability.
  • Product 2: Professional, full polish chrome.
  • Product 2: Hex bit sockets meet or exceed ASME B107.1.
Check Stock

Hi-Spec 39 Piece Metric Tap & Die Set. Complete M3 to M12 Fine & Coarse Tools to Cut, Chase and Thread with Screw Pitch Gauge in a Tray Case

  • CLEAN CUT RESULTS: Start DIY garage and workshop tapping and threading with the Hi-Spec 39 Piece Metric Tap and Die Tool Set. Whether its internal or external rethreading, cut new material, chase damaged or old screws, repair rusty nuts, bolts and spark plugs.
  • 34 PIECE METRIC SIZES: Most popularly used coarse and fine thread sizes and pitches of three and four flute tapered and plugged taps and dies. Metric Tap and Dies: 8 thread sizes from M3 to M12 with 16 pitch sizes plus NPT (1/8-27).
  • GOES THROUGH METALS: For materials such as carbon alloy steels, cast iron, aluminium, brass and bronze. Using premium GCr15 Alloy steel, a high carbon chromium bearing steel with high Rockwell hardness, contact fatigue performance, and corrosion resistance.
  • 3 TAP & DIE WRENCH HANDLES: Just fix the tap or dies tools into the steel alloy wrench handles with adjustable fittings and get turning. Includes a handy mini-screwdriver to assemble and fix the dies.
  • SCREW PITCH GAUGE: Easily and accurately measure the pitch or lead of a screw thread with the 16-Blade Screw Pitch Gauge. All tools and accessories are kept tidy and organised in a slimline case for simple storage and carry.
Check Stock

GEARWRENCH 42 Piece Ratcheting Tap & Die Set Metric - 3886

  • Die adapter works on round and hex shaped Dies.
  • Ratcheting T-handles wind Dies with a 5° swing arc and have a reversing lever to eliminate hand-over-hand turning.
  • Twist lock guide system reduces the “walk back” of the die guide and keeps the dies centered while cutting.
  • Die adapters work with the 3/8 Drive pass-thru ratchet and socket system as well as socket Accessories".
  • Auto-locking feature allow the tap adapters to be removed safely.
Check Stock

GEARWRENCH 77 Piece SAE/Metric Ratcheting Tap and Die Set -3887

  • Gearwrench Die adapter works on round and hex shaped dies.
  • Gearwrench Ratcheting T-handles wind dies with a 5° swing arc and have a reversing lever to eliminate hand-over-hand turning.
  • Twist lock guide system reduces the “walk back” of the die guide and keeps the dies centered while cutting.
  • Die adapters work with the 3/8inch Drive pass-thru ratchet and socket system as well as socket accessories.
  • Auto-locking feature allow the tap adapters to be removed safely.
Check Stock

Tshya 270Pack 2inch Sanding Discs Pad Variety Kit for Drill Grinder Rotary Tools Die Grinder Accessories with 1/8'&1/4' Shank Backer Plate, Sanding Pads Includes 36-3000 Grit

  • ...26Pcs) and Aluminum oxide hook loop discs (240Pcs),sanding with common grits (P36-3000) to meet your various polishing requirements..
  • ✔ TWO TYPES SHANKS - We have found all the connection methods for your project as far as possible. Roll Lock 1/4 inch(6.35mm) Round shank works better with pneumatic tools.
  • 1/4 inch Hex shank more suitable for electric tools..
  • ✔ THREE WAYS CONNECT - The Air-Tool Backer Plate with 1/8"&1/4" Shank can work with any air or electric drill, die grinder, and other rotary tools for the utmost sanding control. You can even put the pad directly on a pneumatic tool without shank..
  • ✔ PERFECT FOR DIE GRINDER - A special soft PU Foam adapter Pad has been developed for this Kit, you can easily install the Hook Loop sandpaper on the Black Disc Pad Holder, so that your can do more with die grinder,Time is Money！.
  • ✔ 270 PACK – 240Pcs 2 inch H&L Sanding Discs (P80/120/180/240/320/400/600/800/1000/1500/2000/3000 each 20Pcs), 15 Pcs Zirconia roll lock discs (P36/60/80 each 5Pcs), 9 Pcs Non-woven discs, 1Pcs Strip disc, 1Pcs Wool disc, 1Pcs Air-Tool Backer Plate with 1/8"&1/4" Shank, 1Pcs Disc Pad with 1/4"Round/Hex Shanks, 1Pcs Soft Foam Layer Buffering Pad, 1Pcs PU Foam adapter Pad..
Check Stock