ReviewsHex Shank Drill Chuck

FTG USA Countersink Drill Bit Set 3 Pc #10 (3/16') Wood Countersink Drill Bit Same Size Set Countersink Tapered Countersink Bit, Quick Change Shank, 1 Hex Wrench, Woodworking Countersink Drill Bits

  • ...ountersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 3 Piece drill set All Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2348 drill bit set hex shank.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
Check Stock

JIECHENG 6 inch Hole Saw for Cornhole Boards,Metal,Drywall,Plasterboard,Wood and Plywood

  • High grade hole saw 6 inch with 3/8'' Hex shank Mandrel,the cutting depth is about 1.24 inch (32mm),it can make 6 inch diamteter holes..
  • Heavy duty for making Cornhole Boards,air ducts,ceiling light,speakers,duct work,it can drill in drywall,wood ,plastic, gypsum board,aluminium,soft thin metal and rubber. very useful for Interior decoration, DIY tools, downlight installation.
  • Good material:High Speed Steel M42 Bi-metal. with sharp teeth,cut the wood very easy and non binding clean edge..
  • Notice: Please keep safe when operate the drilling work. it is better firstly slow speed,then higher. wear safety glasses it important for safe of eyes. and big hole should be low rotation speed..
  • Rich configuration,Include 1pcs bimetal hole saw 6 inch,1pcs mandrel with pilot drill bit,1pcs extra pilot drill bit,1pcs wrench,1pcs spring..
  • This item is mainly for all kinds of woods and soft material, but not for thick steel plate..
  • The shank of arbor is hex,3/8"(9.5mm),it is distance between two sides. so it is for 10mm (3/8") drill chuck or larger chuck..
Check Stock

Balande 1.5-13mm Capacity Drill Chuck, 1/2”-20UNF Mount Impact Driver Bits Chuck with 3/8\SDS-Plus Shank 1/4\ Hex Shank 1/2” Socket Square Female Adapter (SDJT 1.5-13MM 1 Packing)

  • 1.Mount: 1/2”-20UNF, Capacity range:1.5-13mm, use on impact drills and electric power driver.
  • 2.Come with 3/8"SDS-Plus Shank 1/4" Hex Shank 1/2” Socket Square Female Adapter.
  • 3.professional kit drill chuck securely holds a wide range of twist drill bits, step drill bits, paddle bits and larger circular saw.The included three kinds of drill chuck extension make the converter quick connect to different driver tools.
  • 4.Useful combination with our chuck adapter and 4 tools, you can get an useful combination and help you lock your accessory more stable, so save your time and energy to pick tools or complicated work procedure Please Note: The chuck can NOT be used counterclockwise!!.
  • 5.Our drill chuck adapter tool suitable for gyro-screwdriver, wireless screwdriver, impact screwdriver, impact wrench and some angular polishing machines.
Check Stock

IRWIN SPEEDBOR Tri Flute Wood Drill Bit 1/2' X 6'(3041001)

  • IRWIN SPEEDBOR drill bits use a tri-flute design for faster chip ejection and less binding.
  • This 1/2-inch drill bit has cutting spurs with 3 cutting edges for faster, cleaner holes.
  • A full screw tip allows the drill bit to self-feed for ease of drilling.
  • The grooved hex shank helps prevent slipping in the drill chuck or bit extension.
  • Fits virtually any standard 1/4-inch quick-change chucks, including impact drills.
  • A fast speedbor spade bit that features a Tri-Flute design with a fast chip ejection.
  • Fits all standard 1/4-inch quick change chucks.
  • Full screw tip allows the bit to self feed.
Check Stock

Bestgle 1.5-13mm Capacity Drill Chuck, 1/2-20UNF Mount Impact Driver Bits Chuck Conversion 1/4" Hex Shank Quick Connect Change Adapter Converter with Chuck Key

  • Made from premium chrome vanadium steel, Impact drill chuck Capacity: 0.06-0.5 inch/1.5-13mm.
  • Classic keyed 3-Jaw design securely holds a wide range of twist drills and step drill bits with 1/16" to 1/2" shank..
  • Chuck adaptor with 1/4 inch hex shank quickly connects to any impact driver and converts to drilling function..
  • Versatile use on impact drills and electric power driver to quickly switch tasks and keep the job moving..
  • Note: The product can NOT be used counterclockwise ! It must be transferred hammer drill stalls when use the hammer chuck, other stalls will lead chuck broken!.
Check Stock

Yakamoz 1.5-13mm Quick Change 1/4-Inch Hex Shank Drill Chuck Adatper with Key Convert Impact Driver and Wrench to Drill Attachment Tool

  • Note: The product can NOT be used counterclockwise ! It must be transferred hammer drill stalls when use the hammer chuck, other stalls will lead chuck broken..
  • Constructed from premium chrome vanadium steel. Capacity Range: 1.5 - 13mm/ 1/16" - 1/2", Mount: 1/2"-24UNF..
  • Drill chuck with 1/4 inch hex shank quickly connects to any impact driver and converts to drilling function..
  • Classic keyed 3-jaw design securely holds a wide range of twist drills and step drill bits with 1/16" to 1/2" shank.
  • Versatile use on impact drills and electric power driver to quickly switch tasks and keep the job moving.
Check Stock

OFNMY Cordless Right Angle Drill Attachment Adapter 90 Degree Handle Chuck 3/8' Keyed Chuck 8mm Hex Shank Power Tool Accessory (Jaw Chuck Range/1.0mm-10mm)

  • [Heavy Duty Right Angle Drill] Made of aluminium with a heat treated steel shank, and full metal aluminium casing with metal gears for strength and durability.
  • [8mm Hex Shank] Suitable for hand or power drills, including portable electric drills, sanding or buffing attachments.
  • [10mm(3/8″) Chuck] Jaw chuck range:1-10mm, with a key to tighten/loosen it, Max. 1500RPM with 25N·m torque.
  • [90 Degree Handle Chuck] Right angle drill attachment can make drill power swerve 90°and get to hard-reached places, design for the professional kitchen fitter, joiner or construction worker.
  • [Simple to Install & Operate] 155mm length metal handle for stable, fits in virtually any drill, air, electric, cordless etc..
Check Stock

NEIKO 30275A Impact Wrench Adapter | 1/2 Drive Female to 1/4 Hex Converter | Quick Release | Quick Change Chuck | Square to Hex Bit Adapter| Impact Rated Cr-Mo Steel for Ratchet Wrenches Drivers

  • CONVERSION: Each hex to square to hex adapter /converter has duo ends. Female 1/2 inch adapter on one end and a 1/4 inch female hex-adapter on other....
  • PREMIUM QUALITY: Each impact to hex chuck adapter is made with a heavy-duty chrome molybdenum steel construction for durability and allows for the....
  • MULTI-FUNCTIONING: This impact chuck adapter converts any air or power impact wrench into a drill or ratcheting wrench into a driver or impact....
  • QUICK-CHANGE: The 1/2” drive quick-release mechanism in the chuck allows for easy, one-handed swapping between impact driver bits while working.....
  • 1/4” FIT: This impact hex adapter securely holds any standard screwdriver bits in a 1/4" hex-shank bit (including insert drill bits) to eliminate....
Check Stock

NEIKO 20753A Keyless Chuck Conversion Adapter | 1/4” Hex Shank | Convert Cordless Screwdrivers into Power Drills in Seconds | For Round-Shank Drill Bits | No Keys Needed to Tighten…

  • [DRIVER TO DRILL]: This unique converter will turn any 1/4” cordless power screwdriver into a drill or grinder for all of your drill bits up to 3.8 mm (0.15 inches) in diameter..
  • [QUICK INSTALL]: This chuck converter goes from driving to drilling in seconds to keep up with the pace of your job by a simple plug and play action..
  • [KEYLESS CHUCK]: The keyless chuck securely holds round-shank drill bits without the need for keys or extra tools to install the drill bit onto your cordless screwdriver giving you a quick and easy transformation to a cordless power drill..
  • [1/4” FIT]: The 1/4” hex shank easily inserts into your driver with ease letting you switch from task to task instantly..
  • [NOTE]: If you plan to drill through hard metal such as steel and if especially thick, then please use a wrench or a plier to tighten the drill bit into place for secure and accurate drilling..
Check Stock

Milwaukee 48-32-5033 Power Drill Bit Extensions Shockwave Socket Adapter Set, 1/4\

  • ... which you use when you have hard places to get to,360 degree adjustable thumb flange.It can connect hand drill and manual wrench.The function head is equipped with a locking and magnetic device, to ensure that the sleeve does not fall.Built-in strong magnet for good holding power, accepts all 1/4" standard hexagon shank bits.Apply to all electric drill and socket wrench, which allows to reach unreachable or tight spaces..
  • ☆☆ 3Pcs Colorful Socket adapter impact set - 1/4" drive adapter, 3/8" drive adapter, and 1/2" drive adapter and each with a 1/4 inch hex shank driver socket adapter set .Connect impact sockets/socket wrenches/sockets bits/driver sockets to power cordless.
  • ☆☆ 1/4 Inch Hex Shank Magnetic Extension Chuck Adapter Quick Release Bar Socket Screwdriver Bit Holder | 60mm/ 100mm/ 150mm Length,Suitable for electric, pneumatic screwdrivers and other screwdriver bits of power tools, drill extended..
  • ☆☆ 1 Pack include 3 different most useful tools,used in the installation of pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool ..
Check Stock

FTG USA Wood Countersink Drill Bit Set 6 Sizes Set Countersink HSS M2 Tapered Drill Bits, Quick Change Hex Shank Countersink bit, 2 Stop Collar, 1 Allen Wrench, Countersink Drill Bit for Woodworking

  • ...M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set 6 sizes drill bits with countersink #4 (7/64"), #6 (9/64"), #8 (11/64"), #10 (3/16"), #12 (7/32"), #14 (1/4") Adjustable wood countersink, 2 Depth Stop Collar, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs sizes 1/2" and 3/8". Hex shank compatible with 1/4 inch standard Quick Change chuck including impact drills.
  • Wood drill bit set with adjustable 4 Flute Cutter counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood, FTG 2341P tapered countersink drill bits.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits....
Check Stock