ReviewsHexagon Shaft Shaft Coupling

Xnrtop 8mm to 8mm Shaft Coupling 25mm Length 18mm Diameter Stepper Motor Coupler Aluminum Alloy Joint Connector for 3D Printer CNC Machine DIY Encoder(Pack of 2）

  • Shaft Usage: 8mm to 8mm / 0.31 to 0.31 inch.
  • Flexibility of coupling shaft removes stress between the motor and driving components..
  • The shaft couplers are widely applied to small CNC machines encoding and 3D printers Z shaft coupling, simplifies the debugging difficulty..
Check Stock

3PCS Synchronous Synchron Motor Turntable Motor Electric Synchron Motor For Cup Turner,cuptisserie,Tumbler Cup Rotator with 7mm Flexible Coupling 100-127VAC 50/60 Hz 4W 5-6RPM/MIN CCW/CW

  • Product Name: Connector: Brass material 7mm/0.275 in length hexagon motor flexible coupling, support for any of the motor shaft diameters of 7MM/0.275in..
  • Manner of working: CCW/CW . Motor Overall Size : 4.9 x 2cm/ 1.9″ x 0.78″ (D*T).
  • Shaft Size : 7 x 15mm/ 0.27″ x 0.59″ (D*L) ,Mount Hole Dia. : 4.5mm/ 0.18″.
  • Coupling size:the cylindrical inner diameter is 7 mm/0.275in Motor Material: Metal&Plastic, Net Weight: 85g, Main Color: Silver Tone.
  • 3PCS 6ft switch plug cord:The external of this switch plug cord made up of PVC Plastic, and the Internal is Copper Core.
  • 3 Quick Connector Terminal The shell is made of high quality PVC insulation fireproof material, safe, non-toxic and corrosion resistant.it is easy to operate, saving time and effort.The surface has obvious markings.These can be used for motors, electrical controls, power supplies, household appliances, lighting, machinery and other electrical connections..
  • Multiple applications: Widely Used for cup turner,cuptisserie, Tumbler cup rotator, heater machine, christmas tree, Dynamic Visualizer ,Arts & Crafts lighting rod dryer, massagers, drying ....
Check Stock

3PCS Synchronous Synchron Motor Turntable Motor Electric Synchron Motor for Cup Turner, Cuptisserie, Tumbler Cup Rotator with 7mm Flexible Coupling Connector 100-127VAC 50/60 Hz 4W 5-6RPM/MIN CCW/CW

  • Product Name: Connector: Brass material 7mm/0.275 in length hexagon motor flexible coupling, support for any of the motor shaft diameters of 7MM/0.275in..
  • Manner of working: CCW/CW. Motor Overall Size : 4.9 x 2cm/ 1.9" x 0.78" (D*T).
  • Shaft Size : 7 x 15mm/ 0.27" x 0.59" (D*L) ,Mount Hole Dia. : 4.5mm/ 0.18".
  • Coupling size:the cylindrical inner diameter is 7 mm/0.275in Motor Material: Metal&Plastic, Net Weight: 85g, Main Color: Silver Tone.
  • 3PCS 6ft switch plug cord: The external of this switch plug cord made up of PVC Plastic, and the Internal is Copper Core.
  • 3 Quick Connector Terminal The shell is made of high-quality PVC insulation fireproof material, safe, non-toxic and corrosion resistant.it is easy to operate, saving time and effort. The surface has obvious markings. These can be used for motors, electrical controls, power supplies, household appliances, lighting, machinery, and other electrical connections..
  • Multiple applications: Widely Used for cup turner, patisserie, Tumbler cup rotator, heater machine, Christmas tree, Dynamic Visualizer, Arts & Crafts lighting rod dryer, massagers, drying the epoxy, popcorn machine, power watch winder,....
Check Stock

uxcell 10mm to 10mm Bore Rigid Coupling Set Screw L22XD16 45# Steel,Shaft Coupler Connector,Motor Accessories

  • Connection Diameter: 10mm to 10mm, Total Length: 22mm /0.87 inch, Outside Diameter : 16mm/ 0.63 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 8mm to 8mm Bore Rigid Coupling Set Screw L22XD14 45# steel,Shaft Coupler Connector,Motor Accessories

  • Connection Diameter: 8mm to 8mm, Total Length: 22mm /0.87 inch, Outside Diameter : 14mm/ 0.55 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 7mm to 7mm Bore Rigid Coupling Set Screw L22XD14 Copper,Shaft Coupler Connector,Motor Accessories

  • Total Length: 22mm/0.87 inch, Outside Diameter : 14mm/0.55 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 4mm to 4mm Bore Rigid Coupling Set Screw L26XD10 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories

  • Connection Diameter: 4mm to 4mm, Total Length: 26mm /1.02 inch, Outside Diameter : 10mm/ 0.39 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 5mm to 6mm Bore Rigid Coupling Set Screw L22XD14 Copper,Shaft Coupler Connector,Motor Accessories,2pcs

  • Connection Diameter: 5mm to 6mm, Total Length: 22mm /0.87 inch, Outside Diameter : 14mm/ 0.55 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 1/8 inch to 5mm Bore Rigid Coupling Set Screw L26XD10 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories

  • Connection Diameter: 1/8 inch to 5mm, Total Length: 26mm /1.02 inch, Outside Diameter : 10mm/ 0.39 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 5mm to 5mm Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Blue

  • Connection Diameter: 5mm to 5mm, Total Length: 25mm /0.98 inch, Outside Diameter : 14mm/ 0.55 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock

uxcell 6mm to 10mm Bore Rigid Coupling Set Screw L22XD16 Stainless Steel,Shaft Coupler Connector,Motor Accessories,2pcs

  • Connection Diameter: 6mm to 10mm, Total Length: 22mm /0.87 inch, Outside Diameter : 16mm/ 0.63 inch.
  • Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
  • Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
  • high torque with rigidity, low inertia and excellent sensitivity..
  • NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
  • Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Check Stock