ReviewsHexagonal Bolts And Nuts

Boat Cleats 8 inch (2 Pack) - Electrophoretic Coated Boat Dock Cleats Black, Rope Cleat, Anchor Line Cleat,Dock Cleats With Hardware Ideal for Boat Docks, Decks, Piers for Tying up Boats, Marine Decor

Dock Cleats 8 inch Black- These are well durable iron nautical cleats and corrosion resistant, Include 2 boat cleats with 4 bolts and nuts ready to use indoor and outdoor.These can hold their own against the weather..
Hexagonal Hole for Easy Installation - Boat tie down cleats bolt will stay in place when securing the cleat. no more holding the bolt with one hand and tightening with the other..
Wide Footprint for Strength- These black boat cleats for dock lines large bottom footprint for additional strength,Perfect as cleat hook for boat docks, decks, piers for tying up boats, kayaks and jet ski's..
Size&Hardware- These black dock cleats 8 inch L x 1.9 inch H ,base measures 2.8 inch x 1.2 inch.
mounting holes 1.65 inch center to center,boat cleats with hardware - M8x 4.1 inch bolts and nuts included, perfect size to fit any use, bolts can be cut if needed..
Home Nautical Decor- Boat dock cleats 8 inch make your home stand out.
perfect for maritime, beach, garden, pool, coastal decorations.
use them as cabinet pulls, boat cleat hooks for towels, rustic coat hanger, curtain tie-backs, nautical coat hooks.boat cleat wall hook,boat cleat hooks..

Check Stock

HQST Adjustable Solar Panel Tilt Mount Brackets, 28 inch Solar Panel Racks with Foldable Tilt Legs - Support up to 150 Watt Solar Panels for Boats, RV, Roof Off Grid System

【WIDE APPLICATION】: Adjustable solar panel mounting brackets designed for off-gird solar systems, compatible with HQST Solar Panels under 150W. Great addition for use on boats, RV, roof, marine etc..
【HIGH EFFICIENCY】: Ideal for positioning solar panels at an angle on a rooftop.Gain up to 25% more solar panel efficiency by tilting your panels towards the sun instead of laying them flat.Maximum tilt angles depend on the size of solar panels..
【EASY TO INSTALL & ADJUST】: Quick assembly with stainless steel fasteners and precise hole placement. The package includes the bracket between tilt to panel..
【LIGHT WEIGHT BUT STRONG】: Our solar tilt mounts are made of aluminum alloy, which is light weight and ideal for easy transportation and safe mounting..
【 PACKAGE INCLUDES】: Solar panel mounting kit comes with 4 * fixed brackets.

Check Stock

Deburring External Chamfer Tool, Deburring Chamfering Drill Bit, Bolt Deburring Tool Stainless Steel, Remove Burr Tools Quick Release Hex Shank Fits 1/2″to 1-3/8″ (13mm-35mm)

【Improved Carbide Cutting Edge】Razor sharp, maximum efficiency and durability. This demurring external chamfering tool features carbide cutting edge that provides better performance and longevity than counterparts made of materials such as high speed steel..
【Efficiently Safety Design】The hexagonal shank deburring tool can be tightly connected with the head drill, and it has sharp teeth inside, which can cut bolts safely and effectively, quickly repair damaged bolts and tighten nuts in place, without hurting hands and producing no sparks.
【Operation simply】You can attach a deburring external chamfering tool to the end of a power drill and apply light pressure at the lowest speed to remove the burrs. You don’t need to look for replacement bolts, deburring tools repair damaged bolts and improve work efficiency, A good helper for home tools and factories.
【Optimal Compatibility】Deburring external chamfer tool fits 1/8′ (3mm) to 3/4′ (19mm). Operate with sufficient lubrication and less than 500 RPM.Hex shank with quick release design, fits most drills. Can be used to repair damaged/flatted bolts of virtually any material..

Check Stock

Crib Screws Parts Replacements - M6 Baby Bed Crib Bolts and Barrel Nuts for Furniture Bed Cot Bunk 16mm 20mm 30mm 40mm 45mm 50mm 55mm 70mm 75mm 85mm Crib Bolts

This is a good replacement for your missing M6 baby crib screws and bolts. If you just lost 1 or 2 baby bed bolts or nuts, this kit is your choice. ..
This crib screws hardware kit contains16mm bolts, 20mm bolts, 30mm bolts, 40mm bolts, 45mm bolts, 50mm bolts, 55mm bolts, 70mm bolts, 75mm bolts, 85mm bolts and 3 size barrel nuts (D x L: 9.8mm x 11mm, 9.8mm x 12.5mm, 9.8mm x 14.5mm) and one free hex key..
Our crib screws bolts and nuts are universal, they are made of carbon steel, they are solid replacements parts for most cribs [but not for all cribs], beds, cot, bunk, tables, chairs, or workbenches, DIY projects, furniture, etc. (for Woodwork Only).
Crib Screws Parts Replacements Tips: there are 3 thread pitches for M6 bolt, M6x 1, M6x0.75 and M6x 0.5, our M6 bolts thread pitches are M6x 1, if your original barrel nuts are M6x 0.75 or 0.5, our M6 bolts will not work with your barrel nuts, you can replace the bolts and the nuts together with our new crib screws bolts nuts set..
Baby Bed Crib Screws and Bolts: please measure the size of the holes that the bolts fit in to confirm if the hole diameter is 6mm, some cribs use 8mm(M8) bolts. And please check the lengths of the bolts you will need to confirm the right size you will need,.

Check Stock

Crib Screws and Bolts Replacement Hardware Kit - Baby Bed Screws 85mm 75mm 70mm 55mm 50mm 45mm 40mm 30mm 20mm 16mm M6 Replacement Bolts Barrel Nuts for Baby Toddler Bed Crib Furniture

Crib blots and screws hardware kit contains16mm bolts, 20mm bolts, 30mm bolts, 40mm bolts, 45mm bolts, 50mm bolts, 55mm bolts, 70mm bolts, 75mm bolts, 85mm bolts + 3 sized barrel nuts (D x L: 9.8mm x 11mm, 9.8mm x 12.5mm, 9.8mm x 14.5mm) + one free hex key..
Our crib screws bolts and nuts are made of carbon steel, they are solid replacements parts for most cribs, beds, cot, bunk, tables, chairs, or workbenches, DIY projects, furniture, etc. 【NOT for all cribs, Please Check Your Crib Assembly Instruction and Compare Bolt Sizes and Lengths to See if This Kit Will Work】.
This is a good replacement for your missing M6 baby crib screws and bolts. If you just lost some bolts or nuts, this kit is your choice..
Crib Screws Parts Replacements Tips: there are 3 thread pitches for M6 bolt, M6x 1, M6x0.75 and M6x 0.5, our M6 bolts thread pitches are M6x 1, if your original barrel nuts are M6x 0.75 or 0.5, our M6 bolts will not work with your barrel nuts, you can replace the bolts and the nuts together with our new crib screws bolts nuts set..
Baby Bed Crib Screws and Bolts: please measure the size of the holes that the bolts fit in to confirm if the hole diameter is 6mm, some cribs use 8mm(M8) bolts. And please check the lengths of the bolts you will need to con....

Check Stock

Renogy 28in Adjustable Solar Panel Mount Brackets, with Foldable Tilt Legs on Any Flat Surface for RV, Roof, Boat, Any Off-Grid Systems

Adjustable solar panel mounting brackets designed for off-grid solar systems..
Quick assembly with stainless steel fasteners and precise hole placement..
Great addition for use on top of an RV or other flat surface..
Compatible with Renogy Solar Panels under 100W..
Package Includes: Four (4) Fixed L-Brackets, Two (2) Tilt L-Brackets, Six (6) M8 Plastic Knob Screws, Six (6) M8 Wing Nuts, Four (4) M6 x 16mm Hex Cap Bolts, Four (4) M6 Split Lock Washers, Eight (8) M6 Flat Washers, Four (4) M6 Hexagonal Nuts, Six (6) M8 Washers, Six (6) M8 Spring Washers, Six (6) #10 x 1¼ in Self-Drilling Cap Screws, Six (6) Plastic Retaining Rings.

Check Stock

MAXPOWER Heavy Duty Adjustable Wrench 10 Inch, Adjustable Shifter Movable Spanner with Extra Large Jaw Capacity, Drop Forged Cr-V Steel, Chrome Finish, Metric/SAE

DURABLE CR-V STEEL – Drop-forged chrome vanadium alloy steel heat-treated for enhanced strength and long-lasting durability. Stands for long-term professional use..
CHROME PLATED FINISH – Provide a much more reliable and effective rust and corrosion protection..
EXTRA LARGE JAW CAPACITY – Nearly 20% larger than common ones, up to 34mm(1-3/8in) caliber, covers a wider application range. Clear metric/SAE scale is laser-etched and never fades..
SMOOTH ADJUSTMENT – Features with easy-to-turn thread knurls to adjust the jaw width, achieving an exact fit for fasteners or bolts with different sizes..
HIGH TORQUE – Maximum torque exceeds ASME standards by 30% (ASME: 507.15N.m, Ours: 659.29N.m). Used on both bolts and nuts with hexagonal or square heads..

Check Stock

MAXPOWER Softgrip Adjustable Wrench 8 Inch, Shifter Movable Spanner with Ergonomic TPR Handle, Super Large Jaw Capacity, Drop Forged Cr-V Steel, Chrome Finish, Metric/SAE

DURABLE CR-V STEEL – Drop-forged chrome vanadium alloy steel heat-treated for strength and durability. Chrome-plated finish brings great rust and corrosion protection..
SUPER LARGE JAW CAPACITY – Maximum jaw caliber reaches up to 38mm(1-3/8in), covers a wide application range with short handle. Clear metric/SAE scale is laser-etched and never fades..
SOFT ERGONOMIC GRIP HANDLE – Non-slip soft TPR handle double injection molded for a comfortable grip..
SMOOTH ADJUSTMENT – Features with easy-to-turn thread knurls to adjust the jaw width, achieving an exact fit for fasteners or bolts with different sizes..
HIGH TORQUE – Maximum torque exceeds ASME standards. Used on both bolts and nuts with hexagonal or square heads. Perfect for automotive, industrial or maintenance use..

Check Stock

Universal Joint Set, Joint Adapter Ratchet Socket, Universal Sleeve Manual Tool Designed for All The Hexagonal Side Handle, 1/4-Inch, 3/8-Inch, 1/2-Inch Drive Set, 3-Piece, Chrome Vanadium Steel

High quality: This product is made from High-quality chrome vanadium steel CR-V or strength and durability, even in the toughest applications. The surface of the product has been Chrome plated to resist rust and corrosion so that it is rust proof and beautiful..
Omnipotent steering: The sleeve can be converted to four direction freely, 90-degree swivel head locks onto socket and drive tang for fast and easy use, to make leverages can turn to any direction. These Universal Joints Hand tools are especially used to access difficult-to-reach fasteners around obstacles. Giving you just the right angle on tough jobs, they save you time and your knuckles..
Keep on sockets: Spring-loaded detent balls securely latch onto sockets, preventing them from being dropped. Get the job done in half the time using the right tools to get at your nuts and bolts..
Widely used: This universal joint socket adapter is suitable for all the hexagonal side handle four square hole groove, which is applied to repair, car modification, wrench socket transformation. It is widely applied to the vehicle transmission.
Includes universal joints: 1/4-Inch drive 3/8-Inch drive, 1/2-Inch drive. Get to all of your nuts and bolts in those tight spaces with 3-p universal joint set..

Check Stock

5/16 x 2\ Long Carriage Bolts with Nuts, Galvanized Steel (Pack of 25)

EASY INSTALLATION: Choose the bolts and nuts that will make the building process a breeze.
FULLY THREADED: These carriages bolts are all fully threaded to ensure items are securely fastened.
HIGH QUALITY: Made from galvanized steel these bolts and nuts are designed to safely secure items both indoors and outdoors for the long haul.
SIZE: 5/16" x 2" carriage bolts and nuts.

Check Stock

ZXFOOG Black License Plate Screws- Anti Theft License Plate Bolts for Fastening Car Tag Frame Holder 1/4 Stainless Steel Security Plate Mounting Hardware Kit- Screws Caps Nuts Rattle Proof Pad

License Plate Security Screws- The anti theft screw adopts a unique design- the screw pan head adopts a hexagonal torx button head, and the center is....
Rust Proof Screws For Car Tag- Using high-grade 304 stainless steel, anti-corrosion and anti-rust, heavy duty, can be used in various environments and....
1/4"(M6) Long Bolts- We provide a complete license plate mount hardware kit, including black license plate screws with caps, fasteners nuts, and....
Rattle Proof License Plate: The black license plate rattle proof pad with adhesive backing is used on the back of the metal plate, reduce the....
Satisfaction Guarantee- We provide many types of license plate screws: self-tapping screws (pointed head) and mechanical bolts (flat head), 20mm and....

Check Stock