ReviewsHidden Deck Screw Drill Bit

Deck Clips Pack of 36 | Grooved Decking Clips and Deck Screws | Deck Starter Clips for Composite Deck Boards | Universal Starter Deck Clips with Decking Screws

  • EASILY INSTALLS- These starter clips are used for the perimeter deck boards and easily install in grooved composite decking boards. Place one at the center edge of every joist 12"-16" apart..
  • THE PERFECT WAY TO DECKING- These hidden deck clips install below deck and help decking stay in place, without all the drill marks in your boards!.
  • WHAT’S INCLUDED- Purchase includes 36 deck screws, drive bit, and 36 deck clips..
  • CONTRACTORS- We always offer discounts when purchasing 5 or more of any of our products..
Check Stock

Wanhork 304 Stainless Steel Deck Railing Connectors, for 2x4 (Actual 1.5x3.5in) Stair Wood Handrail Deck Railing Bracket (2 Pairs, Silver)

  • ...racture. Our Deck Railing Connectors are the most valuable choice in terms of service life and safety..
  • EASY INSTALL：Step 1. Combine the Deck Railing Connectors with the top of 2"x4"(Actually 1.5"x3.5") transverse wood strip at a 90 degree angle, Drill the guide hole with a Wood Drill, and fix it with the drilling screw (Sanding / trimming may be required at railing ends' corners and edges due to wood external size error). Step 2. There are 6 holes on the side, and 6 screws are used to install the horizontal wooden handrail on the column (the screws are drilled in at 30 degrees)..
  • SPECIFICATIONS AND QUANTITY: (L*W)-2x4 inch(Actually 1.5x3.5inch) ，WIGHT/0.5lb。Includings: 2 pairs (equals 4 pcs) of deck rail bracket connectors.
  • 32 pcs(length/1.57inch)black coating Stainless Steel #304 screws-fix the Deck Railing Connectors firmly on the wooden handrail.
  • 1 wooden drill bit（5/16 " )-drill the screws smoothly into the hole.The kit is equipped with all the accessory screws and can be installed immediately..
  • We stand behind our products!All Deck Railing Connectors by us come with FREE replacement warranty if any quality problems or are not what you like. Please feel free to contact us!.
Check Stock

Gifts for Men - Damaged Screw Extractor Kit Stripped Screw Extractor Set DIY Hand Tools Gadgets Gifts for Men Broken Bolt Extractor Screw Remover Sets

  • 6-PIECE SCREW EXTRACTOR SET - The screw extractor set(#0, #1, #2, #2, #3, #4) works with any drill and any size screw or bolt. This damaged screw extractor can remove all common sizes of damaged, stripped or broken screws..
  • HIGH QUALITY - This damaged screw remover tool kit is made from High-Speed Steel H.S.S 4341# , which have high hardness of 63hrc, it's durable and easily to remove any damaged screws..
  • USER FRIENDLY - Two easy steps, first you just need a drill, select a bit smaller than the damaged screw and begin the extraction by using the drill bit/burnishing tip and drill down to create a clean hole (make sure to run the drill in reverse during the process). Next switch the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite” into the damaged screw, and then you can easily remove the screw..
  • MODERN TOOL : Keep this set in your toolbox to get the damaged screw out and your project back on track. Typically called an easy out or “EZ out”, highly suitable for various machinery repair work..
  • QUALITY GUARANTEE - We have carried out strict quality inspection and control on one of our broken screw adapters before they leave the factory, Your damaged screw remover set is back....
Check Stock

Wanhork 304 Stainless Steel Deck Railing Connectors, for 2x4 (Actual 1.5x3.5in) Stair Wood Handrail Deck Railing Bracket (8 PCS, Black)

  • ...ce in terms of service life and safety..
  • EASY INSTALL: Step 1. Combine the Deck Railing Connectors with the top of 2"x4"(Actually 1.5"x3.5") transverse wood strip at a 90 degree angle, Drill the guide hole with a Wood Drill, and fix it with the drilling screw (Sanding / trimming may be required at railing ends' corners and edges due to wood external size error). Step 2. There are 6 holes on the side, and 6 screws are used to install the horizontal wooden handrail on the column (the screws are drilled in at 30 degrees)..
  • SPECIFICATIONS AND QUANTITY: (L*W)-2x4 inch(Actually 1.5x3.5inch) ，WIGHT/0.5lb。Includings: 4 pairs (equals 8 pcs) of deck rail bracket connectors.
  • 64 pcs(length/1.57inch)black coating Stainless Steel #304 screws-fix the Deck Railing Connectors firmly on the wooden handrail.
  • 1 wooden drill bit（5/16 " )-drill the screws smoothly into the hole.The kit is equipped with all the accessory screws and can be installed immediately..
  • We stand behind our products!All Deck Railing Connectors by us come with FREE replacement warranty if any quality problems or are not what you like. Ple....
Check Stock

Pocket Hole Jig Kit Dowel Drill Joinery Screw Kit Carpenters Wood Woodwork Guides Joint Angle Tool Carpentry Locator

  • ...can be held by one hand, designed for portable or desktop installation, very suitable for DIY household projects or professional and general commercial use. DIY craftsmen use this fixture kit to build their own woodworking projects.
  • Simple and easy to use: Use a jig to drill an inclined counterbore in a joint. Then, screw the self-tapping screw (without pilot hole) into another part, and easily and quickly drill the inclined hole to hide the screw in the wooden furniture to form a precise woodworking hole to create or repair the wood joint.
  • 15° drill angle, 2-way tilt, to ensure accurate screw connection, and then embed the screw to prevent the screw from hiding. Allows you to easily hide screws/fasteners. The 10mm drill bit adapter can be easily replaced according to different sizes of wood types, positions and angles. Sharp drills with excellent performance, work smoothly and efficiently without burrs.
  • Complete pocket hole fixture system-fixture kit includes::1* pocket hole jig with clamp 1* Step Drill Bit (replaceable)1* screwdriver (replaceable)1*steel stop collar 1* square drive bit 2* drivepipe 1* Hex wrench 1* 6 in square drive bit 20 coarse square drive screws 20 fine square drive screws （It is recommended to match electric drill with power o....
Check Stock

Broken Screw Extractor set Stripped screw remover Easy out bolt extractor set Left hand drill bits 11PCS Screw remover and extractor Grabit pro screw extractor

  • 6-PIECE SCREW EXTRACTOR SET - The screw extractor set(#0, #1, #2, #2, #3, #4) works with any drill and any size screw or bolt. This damaged screw extractor can remove all common sizes of damaged, stripped or broken screws..
  • HIGH QUALITY - This damaged screw remover tool kit is made from High-Speed Steel H.S.S 4341# , which have high hardness of 63hrc, it's durable and easily to remove any damaged screws..
  • USER FRIENDLY - Two easy steps, first you just need a drill, select a bit smaller than the damaged screw and begin the extraction by using the drill bit/burnishing tip and drill down to create a clean hole (make sure to run the drill in reverse during the process). Next switch the drill bit to the extraction tip and using consistent, downward pressure (and a slow speed) allow the extraction tip to “bite” into the damaged screw, and then you can easily remove the screw..
  • MODERN TOOL : Keep this set in your toolbox to get the damaged screw out and your project back on track. Typically called an easy out or “EZ out”, highly suitable for various machinery repair work..
  • QUALITY GUARANTEE - We have carried out strict quality inspection and control on one of our broken screw adapters before they leave the factory, Your damaged screw remover set is back....
Check Stock

Fastenmaster Cortex for Decks Hidden Fasteners - Trex Transcend Tiki Torch 100 Lin.ft

  • Kit includes 175 BLACK hidden deck clips, 190 #8x2” black T15 stainless steel screws,driver and drill bits plus gap spacer tools.
  • 175 count kits will fasten 100 Sq. Ft. of decking (16" on Center).
  • Use with pre-grooved 5/4 or 1x hardwoods, composites and PVC material.
  • Stainless Steel Insert molded inside the deck fastener prevents overdriving of the Screw during installation.
  • Spacer leg automatically sets the gap between boards for consistent spacing.
Check Stock

Left Hand Drill Bit Set (10 pc, Silver & Gold), Metal Extractor Bits to Remove Stripped Broken Screws & Bolts w/Iron Storage Case by Mata1

  • HEAVY DUTY REMOVAL SET – These left-handed reverse twist extractors are USA-designed with clean steel technology, HSS strength & high HRC hardness.
  • Suitable for removing hardened, damaged, rusted & painted-over screws or bolts.
  • HARD & TOUGH – The hex shank extraction bits range in diameter from 3/32″ to 5/8″, while the lefthand drill bits range in diameter from 5/64″ to 19/64″ with 118-degree split points for high-speed drilling.
  • CARRY CASE – Ideal tool box to organize & hold the remover drill bits for any craftsman, dad, husband, boyfriend, or wife.
  • DRILL & REMOVE – Select bit size appropriate to the damaged screw/bolt.
  • Insert left-hand drill bit into drill & set drill to reverse.
  • Drill a hole about 1/16” deep into the screw/bolt.
  • Select corresponding extractor & use a mallet/hammer to pound it into the screw/bolt.
  • Use drill, wrench, or tap handle to thread the screw bolt out.
  • HANDY GADGETS – Mata1 is committed to provide lasting quality tools.
  • Mata1 reversible drill bit sets provide an assortment of sizes for removal of stuck bolts & screws.
Check Stock

IRWIN SPEEDBOR Tri Flute Wood Drill Bit 1/2' X 6'(3041001)

  • IRWIN SPEEDBOR drill bits use a tri-flute design for faster chip ejection and less binding.
  • This 1/2-inch drill bit has cutting spurs with 3 cutting edges for faster, cleaner holes.
  • A full screw tip allows the drill bit to self-feed for ease of drilling.
  • The grooved hex shank helps prevent slipping in the drill chuck or bit extension.
  • Fits virtually any standard 1/4-inch quick-change chucks, including impact drills.
  • A fast speedbor spade bit that features a Tri-Flute design with a fast chip ejection.
  • Fits all standard 1/4-inch quick change chucks.
  • Full screw tip allows the bit to self feed.
Check Stock

#10 Smart-Bit Pre-Drilling and Countersinking Tool for Decks and Woodworking (item # BDA146)

  • #10 trim head design for use with #8 trim head screws.
  • Pre-drill and countersink in one easy step that creates the perfect hole every time.
  • The Smart-Bit stop collar spins free of the drill bit, preventing marring of the deck surface.
  • Each Smart-Bit comes with 2 replacement drill bits.
  • A "must have" for any deck builder or woodworker.
Check Stock

New Kreg Tool Company - Kreg Tool Company KJHD Jig HD and Kreg KHC-PREMIUM Face Clamp

  • Designed with the same tried-and-true efficient design and hardened steel drill guides.
  • If you are framing walls, building deck railings, backyard furniture, fences, benches.
  • Screw specification-washerhead, No.14, 2-1/2-Inch, weather-coated, self-tapping tip.
  • 1/2-Inch HD Drill Bit, Stop Block, 6-Inch Driver, Stop Collar included.
Check Stock