ReviewsHidden Decking Screw Driver Tool

Quick Screw Gutter Hangers 5 Inch- 50 Pack - 5 Inch Gutter Clips with Bonus 6 Inch Drill Bit - Hidden Bracket Clips with Pre-Assembled Screw - Fix Sagging Rain Gutters

• 5" QUICK SCREW GUTTER HANGER - These hidden hangers for gutters are designed to increase tension on new and existing gutters. Quick screw bracket comes pre-assembled with a large #12 screw with Type 17 point thread. Fits all 5-inch aluminum (non-plastic) gutters..
• FIX SAGGING GUTTERS & LOW SPOTS - Use our 5 inch gutter clips to repair low spots and un-sag long stretches of gutter. Solve the problem of streams of water getting backed up and pouring over the gutter's edge. Reinforce existing gutters to withstand heavy snow..
• HEAVY DUTY, LOW PROFILE DESIGN - The gutter hangers are engineered with a screw retention dimple that facilitates positive thread engagement, less slipping, firm seating of the screw, no over-torque, and no stripping of the screw head. Remains hidden below the lip..
• EASY INSTALLATION W/ NUT DRIVER - Install the 5 inch gutter brackets using a 1/4" nut driver and cordless drill. Split-less clip means no snagging and faster installation into the rafter end. Total penetration depth is 1-3/8". Ideal for straight or angled fascia boards..
• INCLUDES BONUS 6" YONICO DRILL BIT - Includes a bonus 6" YONICO drill bit for additional clearance and easier installation. YONICO is the same trusted brand carried by big box stores across the country. The....

Quick Screw 6 Inch Gutter Hangers - 25 Pack - Gutter Brackets 6 Inch with Bonus 6 Inch Drill Bit - Hidden Bracket Clips with Pre-Assembled Screw - Fix Sagging Rain Gutters

• 6" QUICK SCREW GUTTER HANGER - These hidden hangers for gutters are designed to increase tension on new and existing gutters. Quick screw bracket comes pre-assembled with a large #12 screw with Type 17 point thread. Fits all 6-inch aluminum (non-plastic) gutters..
• FIX SAGGING GUTTERS & LOW SPOTS - Use our 6 inch gutter hangers to repair low spots and un-sag long stretches of gutter. Solve the problem of streams of water getting backed up and pouring over the gutter's edge. Reinforce existing gutters to withstand heavy snow..
• HEAVY DUTY, LOW PROFILE DESIGN - The gutter hangers are engineered with a screw retention dimple that facilitates positive thread engagement, less slipping, firm seating of the screw, no over-torque, and no stripping of the screw head. Remains hidden below the lip..
• EASY INSTALLATION W/ NUT DRIVER - Install the 6 inch gutter brackets using a 1/4" nut driver and cordless drill. Split-less clip means no snagging and faster installation into the rafter end. Total penetration depth is 1-3/8". Ideal for straight or angled fascia boards..
• INCLUDES BONUS 6" YONICO DRILL BIT - Includes a bonus 6" YONICO drill bit for additional clearance and easier installation. YONICO is the same trusted brand carried by big box stores across the country. T....

CAMO Drive Collated Edge Deck Screws 2-3/8 ProTech 1000 ct

• For use in 1" and 2x (1-1/2") thick treated lumber, composite, capped composite, or PVC decking.
• Edge Deck Screws install through the edge of the deck board, leaving a fastener-free surface.
• Rake tip augers material out, Trimhead reduces visibility on edge, ProTech coating is ACQ Compatible.
• 1000 ct package covers approximately 285 sq ft (joist spacing of 16 inches). Two(2) driver bits included.
• Use exclusively with CAMO DRIVE: the stand-up deck fastening tool that makes installation 5X faster.

CAMO Drive Collated Edge Deck Screws 2-3/8 Stainless Steel 1000 ct

• Use in 1" and 2x (1-1/2") thick wood, composite, capped composite, or PVC decking in areas near open water.
• Edge Deck Screws install through the edge of the deck board, leaving a fastener-free surface.
• Rake tip augers material, Trimhead reduces visibility on edge, 316 Stainless Steel resists corrosion.
• 1000 ct pkg covers approximately 285 sq ft (joist spacing of 16 inches). Two(2) driver bits included.
• Use exclusively with CAMO DRIVE: the stand-up deck fastening tool that makes installation 5X faster.

I-MART 3 Pcs Offset Screwdriver Set Right Angle Phillips Screw Driver, Flat Head

SHARDEN Ratchet Screwdriver 13-in-1 Ratcheting Screwdriver Set Multi Screwdriver Tool All in One with Torx Security, Flat Head, Phillips, Hex, Square and 1/4 Nut Driver

• 【Ratcheting Mechanism】Ratcheting screwdriver breaks through the limitations of the direction, convenient switch for clockwise(fastening) and counter clockwise(loosening) ratcheting and locking position(as standard multi-bit screwdriver), saves time and effort, enables easier all-day driving.
• 【Tool Saver】SHARDEN versatile 13 in 1 multi screwdriver includes a 1/4 inch nut driver and 12 common used screwdriver bits: T15/T20 Security Torx, 4mm/5mm/6mm Flathead, PH1/PH2/PH3 Philips, H4/H5 Hex, and SQ1/SQ2 Square. All the bits needed in one ratchet screwdriver set, reduce the number of tools you must carry.
• 【Space Saver】Ratcheting screwdriver set stores 12 changeable tips in the handle with an integrated bit holder. It's convenient to screw off the end cap and switch the bits. The screw driver handle is 5.90" length, takes up very little space, fits into pocket, also suit for EDC, kitchen drawer, tool belt, tool box or backpack.
• 【Humanized Design】Our screw driversets set has been professionally designed to maximize your repair capabilities. Cushion grip bi-material handle provides superb comfort, slip resistant and maximum torque. Magnetic bit holder ensures speedy and secure bit changes while the 1/4 bit holder applies to standard 1/4" bits.

GreatNeck SD11RC 11 in 1 Screwdriver and Nut Driver Set Multi-Bit Cushion Grip Multi Tool Screwdriver Kit HVAC tools Electrician Tools

• 11-IN-1 SCREW DRIVER SET: features the star tips, Phillips screwdriver bits, flat head screwdriver bits, and square-tip bits used most often by....
• THOUGHTFULLY DESIGNED: All in one screwdriver features interchangeable shafts for quick bit storage.
• Superior socket design for secure bit fit.
• INCLUDES THESE BITS: Slotted or flathead screwdrivers bits (3/16", 1/4"), Phillips head screwdriver bits (#1, #2), Square drive bits (#1, #2), and....
• DOUBLES AS A NUT DRIVER: Multi screwdriver’s shaft converts to nut driver sizes: 1/4", 5/16" and 3/8".
• MULTIPURPOSE TOOL: 11 Nut and Screw drivers in one tool. If you're looking for a multibit screwdriver with the most common torx, square bit, slotted,....

Gam3Gear Repair Case Unlock Opening Tool Pry Torx T6 T8 Screwdriver Kit Pack for Xbox 360 Console

• The tools is needed to open up the XBOX 360 case and remove.
• This unlocking tool kit is the same that is supplied with the replacement cases specially designed to open up the XBOX 360 quickly and safely.
• Using a high quality steel for the screw driver (better than using a handle screw driver) and a special design metal opening tool.
• 100% BRAND NEW, fully compatible with Xbox 360. NOT Compatible with Xbox 360 Slim..

JAKEMY Screwdriver Set, All in 1 with 50 Magnetic Precision Driver Bits, Repair Tool kit with Pocket Tool Bag for iPhone, Computer, Macbook, Cell Phone, PC, Laptop, Tablet, Game Console

• [Precision Screwdriver Set]:Phone tools repair kit with Magnetic Driver Kit, including 2pcs magnetic handle, short post, aluminum alloy extension shaft, tweezers, iPhone pin, suction cup, straightedge, utility knife, crowbar, anti-static wrist strap, 120pcs screw bits(phillips, pentalobe, torx,hex, slotted, triangle, square and other sizes), magnetiser/demagnetizer, etc..
• [Premium Quality Material]:Screwdriver set has a total of 120 replaceable magnetic precision screwdriver bits, are made of high-quality chrome vanadium, strong hardness, durable and precise, will not damage the devices. So the screw driver can be used for a long time..
• [Two Magnetic Screwdriver]: Electronics Screwdriver set Equipped with two magnetic handle screwdrivers, Improve your work efficiency, has a magnetic pad, which is used to retain small screw to avoid missing. Equipped anti-static wrist strap that helps to protect electronics from static. In addition, a magnetizer with strong magnetism can enhance or eliminate the magnetism of the screwdriver bits..
• [Widely used]:150 in 1 professional repair tool kit can be widely used in watch, iPhone / ....

jar-owl Daily Household Tool Set with Drill, 21V Cordless Drill Drive Set with 112pcs Combo Hand Tool Kit for Mens Home Repair

• ...ed adjustable 21V cordless hammer drill can drill into wood,metal,plastic,etc. Max drilling capacity is 22mm(7/8"") for wood, 10mm(3/8"") for steel. 2-Gear-option with max torque 350 in-lbs for high (0-1350rpm) or low (0-350rpm) speed drilling/driving speeds..
• 【EFFICIENT BATTERY】The powerful cordless screw drill driver has one 1.3Amh battery for easy operation. Powered by 1.3 Lithium Ion and charger. The charger runs at standard US 110/120 volt. It just takes you 60-min to be full charged which save up to 50% time than others and its cycle life is more than 250 time. This battery provides power for up to 8Nm of forward..
• 【3/8" KEYLESS CHUCK&VARIABLE TRIGGER】The electric drill has 10mm 3/8" keyless ratcheting chuck can hold the bits without falling off and stop working, make them good for general purpose drilling. Variable speed trigger allow you to select different speeds on the task at hand. A flexible shaft could be used in some places where driver bits are hard to reach. Cordless tool is perfect for home, household, garage, car trunk, mechanic projects and bike repair..
• 【MULTI-FUNCTIONAL TOOL KIT】This professional home power tool drill set contains the most useful advanced tools for designing, repairing or maintaining. Whether it is ....

KiWAV Tappet Valve Adjustment Wrench Tool Set Timing Chrome Vanadium Steel

• The hand tool allows micro adjustment without disturbing the locknut which can be tightened when the correct clearance is achieved..
• Use a 12mm wrench to hold the locknut socket while using square type driver to loosen or tighten the valve adjustment screw..
• 8, 9mm locknut sockets and 3mm square type driver included..
• Fits most motorcycles and ATVs with screw-type tappet adjustments..