ReviewsHigh Current Power Inductors

MartinLogan Motion 60XTi Floorstanding Speaker Matte White (Each)

High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
Inputs: Custom 5-way bi-wire tool-less binding posts.

Check Stock

JBL Professional JRX215 Portable 2-way Sound Reinforcement Loudspeaker System 15-Inch

Progressive Transition high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.
The rugged, acoustically superior enclosure uses advanced adhesives and mechanical fastener technology for extreme durability and improved....
High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.
JBL 2414H-C 1" polymer diaphragm compression driver improves high frequency performance as well as system reliability.
JBL 15" low frequency driver with a 2.5"-diameter edge wound ribbon voice coil for greater efficiency and power handling.

Check Stock

Amidon FT-114-43, Nickel Zinc Ferrite Toroidal Core, Type 43

Wldely used for medium frequency inductors and wideband transformers up to 50 MHz. Very good frequency attenuation frorn 30 MHz to 400 MHz.
Suited for low power, high inductance resonant clrcuits and wideband applications..

Check Stock

JBL Professional JRX225 Portable 3-way Sound Reinforcement Loudspeaker System Dual 15-Inch

Progressive Transition High Frequency Waveguide Provides Superior Coverage Control, Reduced Distortion, And Smoother Frequency Response.
The Rugged, Acoustically Superior Enclosure Uses Advanced Adhesives And Mechanical Fastener Technology For Extreme Durability And Improved....
High-Voltage Capacitors And Inductors With Massive Cores And Heavy Gauge Wire Enable The Crossover Network To Handle High Power Without Saturating.
Jbl 2414H-C 1-Inch Polymer Diaphragm Compression Driver Improves High Frequency Performance As Well As System Reliability.

Check Stock

2 JBL Pro JRX215 15 2000w Professional Passive PA/DJ Speakers 8 Ohm JRX 215

Features: JRX215 15" Two-Way Sound Reinforcement Loudspeaker System. JBI 15 in low frequency driver with a 64 mm (2.5 in) diameter edge wound ribbon....
High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF....
Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Details: Power....
Nominal Impedance : 8 ohms. Recommended Amplifier Power : 250 W to 500 W into 8 ohms. Maximum SPL: 129 dB. Nominal Dispersion : 90 x 50. Crossover....
High Frequency Driver : JBI 2414H-C , 1" exit compression driver mounted on Progressive TransitionWave guide. Low Frequency Driver : JBI M115-8A.....

Check Stock

JBL Professional JRX212 Portable 2-way Sound Reinforcement Loudspeaker System, 12-Inch

JBL 12-Inch low frequency driver with a 2.5-Inch diameter edgewound ribbon voice coil which provides more cross-sectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling..
JBL 2414H-C 1-Inch polymer diaphragm compression driver improves high frequency performance as well as system reliability..
The advanced network topology crossover design shapes frequency response and delivers "coherent summation" in the crossover region..
High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating..
Non-resonant, all-steel handles are used..
Attractive 18-gauge hexagon perforated, steel grille protects components from damage.
Dual-angle pole-mount socket allows the speaker to tilt 10°for more uniform audience coverage..

Check Stock

DC Power Supply 12V 50A AC 96V-240V Converter DC Adapter Universal Regulated Switching Power Supply 12Volt 600W LED Power Supply for LED Strip,CCTV, Radio, Computer Project(12V 50A 600W)

☞DC 12V 50A POWER SUPPLY – Input: AC 85~240 V Switchable.
Output: DC +12V (Adjustable±10%）50A ；Maximum Power：600Watts.
☞High-QUALITY RAW MATERRIALS – Pure Copper Inductors, High-performance Transformers, Dual-capacity Electrolytic Capacitors is The Guarantee of High-quality Power Supply.
☞MULTIPLE PROTECTION – With Over-voltage Protection, Overload Protection, Overheating Protection and Prevent Short Circuit.
☞TESTING & CERTIFICATION – This Power Supply is Finished After 48 Hours Burn-in , and Passed The CE and FCC Certification.
☞WIDELY USED – High quality Switch Power Supply Widely Used in LED Strip, LED Display, Audio Power Amplifier, LED Lighting, Light Box Billboard, etc..

Check Stock

MartinLogan ElectroMotion ESL Electrostatic Floorstanding Loudspeaker - Each (Gloss Black)

High frequency transducer: XStat CLS electrostatic transducer.
Low frequency driver : 8" high excursion, high-rigidity doped fiber cone with extended throw drive assembly, non-resonance asymmetrical chamber format.
MicroPerf panel is housed within a radical aluminum and composite AirFrame.
129 square inches of sound radiating surface on both the front and back.
Proprietary Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
Frequency response: 42 - 22,000 Hz ±3 dB, Sensitivity: 91 dB/2.83 volts/meter.
Recommended amplifier power: 20-300 watts per channel.
Dimensions: 52.1" high, 9" wide, 16.3" deep.

Check Stock

150 pcs Inductor Large Assortment 15 Values 10uH to 4.7mH, 1W, 1 watt

【Small Vertical Inductive】 Small Vertical Inductors Occupy Less Space..
【Performance Stability】 The Inductor Coil Is Protected with PVC or UL Tube To Ensure Stable Performance..
【Feature】 this Choke Inductor Has Special Guide Pin Structure.
Not easy to produce open circuit phenomenon..
【Specification】 1uh to 220uh 1MH to 20MH.
The Choke Coil Inductors Arefi SMALL Distributed Capacits And High Self-Resonance Frequency..
【Include】 10UH, 100UH, 220UH, 1UH, 4.7UH, 15UH, 33UH, 150UH, 1MH, 2.7MH, 10MH, 20MH, 10UH, 1MH, 10MH.

Check Stock

BOJACK 15 Values 160 Pcs Inductor 10 uH to 20 mH DIP Radial Power Choke Inductors Assortment Kit

Small vertical inductors occupy less space..
The inductor coil is protected with PVC or UL tube to ensure stable performance.
This choke inductor has special guide pin structure.
Not easy to produce open circuit phenomenon.
The choke coil inductors are of small distributed capacitance and high self-resonance frequency.
Include：10uh, 1uh, 33uh, 2.7mh, 100uh, 4.7uh, 150uh, 10mh, 1mh, 220uh, 15uh, 20mh 15model, Packed in A plastic storage case.

Check Stock

(2) JBL JRX225 Dual 15\ Professional 4000w Passive DJ/PA Speakers 4 Ohm JRX 225

... JRX225 Dual 15" 2000 Watt Passive DJ/PA Speaker. Dual JBI low frequency drivers with a 64 mm (2.5 in) diameter edgewound ribbon voice coil for greater efficiency and power handling. JBI 2414H-C 25 mm (1 in) polymer diaphragm compression driver.
Advanced network topology crossover design. High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure.
SonicGuard protects the high frequency driver from excess power without interrupting the performance. Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Details: Power Rating : 500 W / 2000 W.
Frequency Range (-10 dB) : 42 Hz - 18 kHz. Frequency Response (3 dB) : 62 Hz - 13 kHz. Sensitivity (1w/1m) : 100 dB SPL. Nominal Impedance : 4 ohms. Recommended Amplifier Power : 500 W to 1000 W into 4 ohms. Maximum SPL : 133 dB. Nominal Dispersion : 90 x 50. Crossover Frequency : 2.2 kHz.
Dimensions (H x W x D) : 1092 mm x 464 mm x 432 mm (43 in x 18.3 in x 17 in). Weight : 42.6 kg (94 lb). High Frequency Driver : JBI 2414H-C , 1" exit compression driver mounted on Progressive Transition Waveguide. Low Frequency Dr....

Check Stock