ReviewsHigh Current Power Supply

MEISHILE DC 12V 50A 600W Switch Power Supply 110V AC to DC 12 Volt 50 Amp SMPS Converter Power Supply Adapter Transformer

  • ☆ Simultaneous power supplies for devices with different currents/watts. Transformer (PSU) convert AC to DC using SMPS mode. Used for DC 12V Servos, Pumps, Car stereos, LED light strip, CCTV security camera, household appliances, electronic devices, brushless motor, automation equipment, computer project, etc.
  • ☆ Universal input voltage: AC 110V / 220V (85-145V/185-265V).
  • Output current depends on the current drawn by your device. The total output current/power can not exceed 80% of the rated power of the power supply.
  • ☆ Portable, Small and Compact: 21.5×11.5×5cm/8.5×4.5×2 inch, Net weight 0.8 kg. SATISFACTION GUARANTEE: For any question, do not hesitate to contact us, we offer you a satisfaction guaranteed.
  • ☆ High EFC, Low-loss, Long Service Life: More than 6,000 hours of service life.
  •  Low standby power consumption, High efficiency. EFC much higher than linear supply. Safe and Stable: Power Supply has over / under voltage, over heat protection, continuous fan heat dissipation. Strictly tested before leaving the factory..
  • ☆ Choose: The Rated Power is the Peak Power, does not mean that it applies to devices at this power (watt). For resistive device, SMPS peak p....
Check Stock

DEVMO 600W Constant Current Boost Converter DC to DC 10V-60V to 12-60V Output Step-up Transformer Module Power Supply Driver Max 10A

  • Input DC10V-60V step-up to DC 12-60V output.
  • Output power= input voltage * 10A. e.g.12V * 10A = 120W 24V * 10A = 240W 60V * 10A = 600W.
  • Output current: 10A is max. 6A or more please strengthen the heat dissipation (The larger the difference between the input and output pressure the smaller the output current).
  • Note: please don't use short circuit to adjust the current. The boost module circuit structure cannot be adjusted by short circuit.
  • Suitable for DIY voltage stabilizing power supply, vehicle power supply, high power mobile power supply, solar panel voltage stabilizer, battery/lithium battery charging, driving high power LED and so on.
Check Stock

MakerHawk Electronic Load Tester - USB Load Tester 150W 200V 20A Resistor Adjustable Constant Current Battery Capacity Tester Module Intelligent Dischar

  • Prevent burning warning: when the input voltage battery and large power test, access must be beforeusing two current adjustment knob counterclockwise to the minimum to zero, then the access, accordingto the priority according to current power to slowly adjust current knob, must not instantly transferred infull, so there are excessive instantaneous power load discharge tube burnt huge risk! Please use thespecial attention to this point, thank you!.
  • Two power supply methods: 1. DC6-12V DC5.0 power supply.
  • 2. DC6-12V Micro USB power supply.The body discharge power cannot exceed 150W, otherwise there is a risk of burnout..
  • Voltage measurement range: 0.00V ~ 200V, Current measurement range: 0.00A ~ 20A..
  • How to operate: Set the capacity, power, time using the Keystrokes method Reset:1. Reset button Long all data (mAh, Klitschko, 00: 00: 00).
  • 2. Fast button twice capacity reset (mAh).
  • 4. Fast button Four time reset (00:00:00).
  • 5. Fast button five settings auto standby, Discharge count down regularly.
  • 6. No load output No load, fast seven key, And current zero zero current, Environmental temperature Accurate calibration..
  • 150W power refers to: In accordance with the power calculation formula P = UI (power = voltage x curre....
Check Stock

8PCS L298N Motor Drive Controller Board Dual H Bridge DC Robot Stepper Motor Compatible with Ardu-ino Electric Projects, Smart Car Robot

  • Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip, Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
  • The L298N driver module, using L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface, you can chip circuitry to 5V power supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential..
  • Terminal driver part of the supply area VMS: +5V ~ +35V.
  • Drive part of the peak current Io: 2A / Bridge.
  • Logical part of the terminal power supply range Vss :4.5-5 .5V.
  • Logical part of the operating current range: 0 ~ 36mA.
  • The control signal input voltage range: 4.5-5.5V low 0V high.
  • To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.
  • High working power to 46v, large current can reach 3A MAX and continue current is 2A, power to 25w..
  • Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability, large capacity filter capacitance,afterflow protection diode, more stable and reliable..
Check Stock

MakerHawk Electronic Load Tester USB Load Tester 150W 200V 20A Resistor Adjustable Constant Current Battery Capacity Tester Module Intelligent Discharge Resistance Power Tester

  • Prevent burning warning: when the input voltage battery and large power test, access must be beforeusing two current adjustment knob counterclockwise to the minimum to zero, then the access, accordingto the priority according to current power to slowly adjust current knob, must not instantly transferred infull, so there are excessive instantaneous power load discharge tube burnt huge risk! Please use thespecial attention to this point, thank you!.
  • Two power supply methods: 1. DC6-12V DC5.0 power supply.
  • 2. DC6-12V Micro USB power supply.The body discharge power cannot exceed 150W, otherwise there is a risk of burnout..
  • Voltage measurement range: 0.00V ~ 200V, Current measurement range: 0.00A ~ 20A..
  • How to operate: Set the capacity, power, time using the Keystrokes method Reset:1. Reset button Long all data (mAh, Klitschko, 00: 00: 00).
  • 2. Fast button twice capacity reset (mAh).
  • 4. Fast button Four time reset (00:00:00).
  • 5. Fast button five settings auto standby, Discharge count down regularly.
  • 6. No load output No load, fast seven key, And current zero zero current, Environmental temperature Accurate calibration..
  • 150W power refers to: In accordance with the power calculation formula P = UI (power = voltage x curre....
Check Stock

pigtone Guitar Effect Pedal Power Supply 10 Independent DC Outputs Suitable for 9V 12V 18V 100mA 400mA Short Circuit and Over Current Protection PD-03

  • ♪ It can supply power to multiple guitar pedals at the same time, no current noise, input: DC18V1A, output: 6x 9V 100mA, 2x 9V 400mA, 1x 12V 100mA, 1x 18V 100mA..
  • ♪ Short-circuit/over-current protection: If a short-circuit device is inserted in the socket or the current is overloaded, the power supply will be stopped. Once the device is disconnected from the DC power source, power to the outlet will be restored. It can protect your pedal from damage..
  • ♪ Material: This pedal power supply is made of high-quality aluminum alloy, strong and durable, not easy to break, can be used for a long time, and is easy to carry..
  • ♪ Packing: 1 x PD-03 guitar pedal power supply, 1 x power adapter, 10 x 60 cm cable, 2 x polarity conversion cable, 1 x user manual..
  • ♪ pigtone is a brand and professional manufacturer of guitar pedals and pedal power supplies. We have our own production and R&D factories, engineers and guitarists. If the product you received is not ideal, please contact us for a solution..
Check Stock

Genuine Yamaha AC Adapter Power Supply DC12V 700mA 12.5W Model: PA-3C 12V

  • 10 Isolated Outputs: This guitar pedal power supply has 10 independent outputs: 9v 100mA x6, 9v 500mA x2, 12v 100mA x1, 18v 100mA x1. Each circuit has its own short circuit and overcurrent protection, i.e. a short circuit on one output will not affect the function of the other outputs..
  • Short circuit and overcurrent protection: In this power supply we use the best high-current output buck switching type integrated regulator circuit, this integrated chip has a complete protection circuit, capable of current limiting and thermal shutdown circuit. The other components can form an efficient regulator circuit structure with over-current protection and over-temperature protection..
  • LED Light: Each output of the pedal power supply has a blue LED indicator, and if one is faulty, the light will not turn on. This helps the musician to quickly locate the fault. The lights also help to find the power connector at night and play a good lighting effect on the stage of the performance..
  • Versatility: the pedalbord power supply has a compact body and 5 feet disconnectable AC power cord, no power adapter, plug and play, easy to carry.Wide input voltage range of 100v to 240v is ideal for international travel, equipped with 4 AC Outlet, total output power of 600w, can be u....
Check Stock

AC-L200 AC-L25A Mobile Power Bank USB Charger Cable for Sony Cyber-Shot Camera and Handycam DCR-IP/DVD/HC/SR/PC HDR-HC/UX

  • ★ DC drive cable can't only play the role of power adapter,while also serving to effectively suppress harmonic current noise..
  • ★ High-quality chips,DC-DC converter,high conversion efficiency.Good stability,can output high current,quiescent current is small..
  • ★ Using a wide range,suitable for all 7.2V-8.4V digital camera and video camera, Support part 9 v digital products..
  • ★ Since the camera itself does not support the fast charging function, some USB ports with quick charging function can't start the quick charging mode of 5V 2.4A-3A, resulting in insufficient power supply. Recommended for normal mode 2.4A, 3A is be better..
  • ★ DC drive cable connected power bank supply for digital cameras, power bank capacity: 8000-30000mAh,equal to the new battery in the camera's power many times.
  • When you turn on the flash to take pictures or video,to provide uninterrupted power supply..
Check Stock

DC Power Supply Variable, 30V 10A Bench Power Supply with 4-Digits LED Display, USB Interface, Adjustable Regulated Switching Power Supply with Encoder Adjustment Knob, Output Enable/Disable Button

  • 【High-precision encoder knob】Different from general knobs, this DC power supply has a precise encoder knob. You can press the knob to switch each digit, and then turn the knob to customize each digit in the range of 0-9. Set the voltage or current you want more accurately..
  • 【Output Enable/Disable Button】In the process of using the bench power supply, Output button can prevent us from forgetting to turn off the output and causing damage to the load. Just press this button to turn on or turn off the output of the power supply. This makes it more convenient for you to use the power supply..
  • 【Overcurrent Protection】When the OCP function is turned on, if the load equipment is short-circuited during operation, the adjustable power supply will automatically stop output and send a buzzer to alert the user. Protect the adjustable power supply and load from damage..
  • 【Precise 4-digit LED Display】The variable power supply with a high-definition 4-digit display, which can display three values of voltage, current and power at the same time. The data is accurate to 0.01V and 0.001A. The bright white digital display helps you to operate as usual in the dark, and you can adjust the brightness of the screen as needed..
  • 【Compact and Lightweight】The meas....
Check Stock

1800W ZVS Induction Heating Board Module Low Voltage High Frequency 12-48V Flyback Driver Heater with Tesla Coil and Cooling Fan

  • The induction heating boards maximum power is 1800W, adopted super PCB layout design and super heat sink, heat dissipation good, since with a cooling fan interface, can also do Tesla discharge, generator voltage inverter, etc.
  • The induction heating circuit adopt 12-48V DC power supply, maximum current is 40A, the power uo to 1800W. It can work continuously under the condition of good heat dissipation. moderate power which make it can be used to quenching, annealing and other heat treatment. also for melted with graphite crucible kim/silver/ copper/aluminum and so on, heating is evenly and fast.
  • it is recommended that not exceed 48V 35A to prevent accidents and damage,Although withstand more than 40A current.Induction heating is recommended to use 36V 20A power supply, 12V power supply is too small almost without response, and 12V power might lead to the voltage decreases, which is very dangerous.More than 24V/20A power supply, the greater the voltage/current, the greater the heating power, heating faster..
  • please check the power output meets the requirements if the MOS tube fever,and be sure to do a good job of cooling.Do not empty the board, otherwise it will create a very high noise, then MOS tube will burn out.
Check Stock

Volvox sp, Living

  • ...CE-POWER 120V 3A DC power supply is a professional power supply regulator with high accuracy of 0.01V and 0.001A, low ripple of DC power supply. The backlit 4-digits LED display has the advantage of high resolution, which can be easily viewed even if you are in low-light conditions . Adjust the required voltage and current through the output switch button without the actual output power, safer and more energy efficient..
  • 【CE & FCC Certification, Multiple Protection, Various Application】Lab power supplies have passed CE & FCC Certification. 120V DC power supply has multiple protections: overvoltage protection, overcurrent protection, overheating protection, over power protection, short circuit protection, leakage protection. DC power supply is suitable for LiFePO4 battery charging, arduino project, laboratories, schools, electronic maintenance , electrolysis, electroplating, lamp test, aging test, DIY, etc..
  • 【Front Power Switch , Stable Vertical Design, Lightweight and Portable】The front power switch is very convenient. Bench power supply adopts stable vertical design, DC power supply has shock absorber rubber feet at the bottom, so it will be safer and more stable during use. DC power supply is very light and portable, with a size of only 3.3 x....
Check Stock