ReviewsHigh End

SpeTool 1/4 End Mill for Aluminum 3 Flutes CNC Spiral Router Bit for Aluminum Cut Non-Ferrous Metal Upcut 2.5 inches Long 5 Pieces

【SPECIFICATIONS】End mills for aluminum with 1/4” shank, 1/4” cutting diameter, 3/4” cutting length and 2-1/2” total length, 3 flutes with flat top, 5 pieces included in the package..
【HIGH PERFOMANCE】These end mills for aluminum are designed for perfect surface finish because of the effective chip removal. With the long service life they are suitable for side milling, end milling, finish machining, etc..
【HIGH PRECISION】High precision grinding and polishing, high resistance to abrasion and temperature resistance, good rigidity, high durability and not easy to break..
【ALUMINUM APPLICATIONS】Best for processing aluminum 6061,7075 etc. Also suitable for non-ferrous metal, plywood, OAK, MDF, and Any Hardwood Working..
【WIDELY USED】These aluminum end mills suit for CNC routers, and Makita, Bosch, or any brands of plunge routers with 1/4" collet..

Check Stock

SpeTool 1/8 End Mills for Aluminum 3 Flutes CNC Spiral Router Bits for Aluminum Cut Non-Ferrous Metal Upcut 1.5 inches Long 5 Pieces

【SPECIFICATIONS】End mills for aluminum with 1/8” shank, 1/8” cutting diameter, 7/16” cutting length and 1-1/2” total length, 3 flutes with flat top, 5 pieces included in the package..
【HIGH PERFOMANCE】These end mills for aluminum are designed for perfect surface finish because of the effective chip removal. With the long service life they are suitable for side milling, end milling, finish machining, etc..
【HIGH PRECISION】High precision grinding and polishing, high resistance to abrasion and temperature resistance, good rigidity, high durability and not easy to break..
【ALUMINUM APPLICATIONS】Best for processing aluminum 6061,7075 etc. Also suitable for non-ferrous metal, plywood, OAK, MDF, and Any Hardwood Working..
【WIDELY USED】These aluminum end mills suit for CNC routers, and Makita, Bosch, or any brands of plunge routers with 1/8" collet..

Check Stock

AUTOTOOLHOME 1/8\ 3/16\ 1/4\ 5/16\ 3/8\ 1/2\ high Speed Steel HSS 4 Flute Straight End Mill Cutter 5/32\ 1/16\ Set of 8

Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..

Check Stock

JW Winco A8330221 B10 V8 AN605 PHOTOCELL CLAMP Plastic

Application: Used for building industrial aluminum frame structure, 3D printer, CNC router, CNC cutting machine, etc..
Easy to Install and Use: The end cover is easy to install and use, and can be easily fixed with screws.
Aluminum Alloy: The end cover made of high quality aluminum alloy, the surface is anodized, and will not fade.
Elaborate Production: Elaborate processing, this 8080 double slot end caps is beautiful and top grade.
Professional Uses: This is 8080 double grooves end caps, which for profiles end caps.

Check Stock

Almay Palette Pops, Naturalista, 0.16 oz, eyeshadow palette

Creamy powder shades for high impact color.
Variety of shades and finishes in each palette.
Dual ended applicator has rounded end + pointed end for multiple looks.
Dual ended applicator has rounded end and pointed end for multiple looks.

Check Stock

CAPiTA Mercury Wide Snowboard Mens Sz 158cm

Design: Directional Twin Hybrid Rocker - This high-end all-mountain directional twin is far superior to some one-trick pony freestyle snowboard..
Specialty: Park/Groomers/Pow - This high-end all-mountain Directional Twin Hybrid Rocker stick is designed to do everything..
Quadratic Sidecut - Blending of three radii to improve turn initiation/exit while providing the best grip possible. This design is uniquely formulated for each model based on its shape and riding style..
Sintered, Stone Ground Base - High-end sintered 4000 Ptex base material that is more durable, harder and faster than extruded..
Performance Core - High strength Aspen is combined with Bamboo and lightweight Paulownia wood to provide the perfect balance of strong and light..

Check Stock

YG-1 EH970 Carbide Square Nose End Mill, Long Reach, TIALN Multilayer Finish, Roughing Cut, 45 Deg Helix, 4 Flutes, 2.5\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter

Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills.
Fine-pitch tooth design and tool geometry are suitable for machining steel up to Rockwell hardness C45, stainless steel, titanium alloys, and nickel-based alloys.
Long-reach end mills have an extended shank for access to recessed areas of the workpiece.
Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings.
Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.

Check Stock

OREI eARC 4K 60Hz Audio Extractor Converter 18G HDMI 2.0 ARC Support - HDCP 2.2 - Dolby Digital/DTS Passthrough CEC, HDR, Dolby Vision HDR10 Support (HDA-927)

Cutting Diameter : 1/8" 3/16" 1/4" 5/16" 3/8" 1/2" 5/32" 1/16".
Suit for: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
The bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..

Check Stock

Auniwaig 3PCS 16mm x 18mm Flare Nut Metric Wrench Set,Metric Double Open End High Carbon Steel, Polished Chrome Plated

【PARAMETER】- Double Open End:16mm x 18mm / 0.63 x 0.71-inch.
【OFFSET END】- 15 degree offset open end allows an increased range of arc swing in tight spaces.
【MATERIAL】- Flare Nut Wrench is made of high carbon steel for strength and durability.
【WIDELY USE】- Double Open End Nut Wrench is Applied in DIY hand-making, automotive repairs, household maintenance, and most general repairs.
【SURFACE TREATMENT】- Fully Polished and Chrome Coated support best anti-rusting surface.

Check Stock

CNC Router Bits 1/8' Shank Ball Nose Carbide End Mill Two Flute CNC Spiral Bits Upcut Cutter 3.175mm Carbide End Mill for Alloy Steels/Hardened Steels 10pcs (3.175x32x55mm)

DIMENSIONS: 1/8" (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 1/2"(12mm). Overall length, 1-1/2"(38.5mm)..
Range of processing：Ball end mills can mill die steel/cast iron/carbon steel/alloy steel/tool steel/ general iron. Ball nose milling cutters can work normally in high temperature environments..
High efficiency：Ball nose carbide end mill is a double-blade with helical design, and the large and uniform pin-out groove is conducive to high-speed machining. The sharp double edge can effectively improve the cutting efficiency of the tool..
Perfect cutting：The ball mill design of the double-blade ball end milling cutter effectively reduces the burr and increases the wear resistance of the tool..
Ball Nose End Mills are Suitable for Side Milling, End Milling, Finish Machining, etc..

Check Stock

2PCs N64 AV Cable,N64 AV to HDMI Cable Audio Video AV Cable Cord Compatible with Nintendo 64 N64,Gamecube GC,Super Nintendo SNES,Game Console Accessories AV/TV Cable(6FT)

【Compatibility】: The Audio Video Cable compatible with many TV games, such as Nintendo 64, GameCube, Super Nintendo SNES etc. (Support TV with RCA input only.) bring you extraordinary experience when you play games on TV..
【High quality material】:Built in high quality copper wire, the plug is nickel plated to achieve the best signal clarity and ensure no delay in game time. The copper pin connector head can be inserted easily and stably without loosening or falling off from the device. Three rows of high-quality PVC shell, flexible without tangle..
【AV/TV cable plug performance】: s video av cable for n64 is a standard AV composite wire, one end is a yellow (video end), red (right channel end) and white (left channel end) connector, and the other end is a Nintendo game console input interface.
【Applicable to most TV models】: N64 power av cable can be used together with modern HD LCD LED TV to ensure that the display screen with composite video end interface and RCA interface at left and right channel ends is applicable, plug and play.
【Perfect substitute】: Two pcs replacement nintendo n64 av cable, which is about 1.8 meters long. The video quality and audio quality of the AV cable are highly restored, allowing you to have a better expe....

Check Stock