ReviewsHigh Feed Drill

DR.DUDU DIY Automatic Chicken Feeder No Waste, 3 Pcs Poultry Feeder Port with Hole Saw, Rain Proof Rodent Proof Gravity Feed Kits for Buckets, Barrels, Bins, Troughs

  • Easy to Install: All you need is a drill and a container that you are planning to use to hold the chicken food. Our package includes hole saw for you to assemble easily. You can make an automatic outdoor chicken feeder in a minute..
  • Upgraded: There is a baffle at the opening to prevent the food from spilling out while the chicken is eating. The on-off design inside allows you to feed regularly and avoid food waste. Chickens can see food from a distance through small holes. Our high quality chicken feeder will make your farm life easier..
  • Gravity Feeder: No waste chicken feeders are applicable to any containers, and can feed several chickens at the same time, poultry can have an easy access getting their fresh food. Reduce spillage and less mess..
  • Innovative Design: Our chicken feeder port is waterproof to keep the food clean, and no wastage of chicken food any more. You can DIY your own chicken feeder container with our poultry feeder ports..
  • Widely Use: Our adaptable feeder ports can be used for buckets, bins, barrels, boxes, troughs. You don't always have to feed your animals. The larger the container is, the less often you have to feed, saves a lot of time feeding..
Check Stock

Makita XAD03PT 18V X2 LXT® Lithium-Ion (36V) Brushless Cordless 1/2\ Right Angle Drill Kit (5.0Ah)

  • x2 LXT technology delivers more power, speed and run time without the hassles of a cord.
  • Drills up to 6-1/4" holes with hole saws and 4-5/8" holes with self feed bits.
  • Drills up to 160 2-9/16" holes per charge in 2x spf using two 5.0Ah batteries and self feed bit (self feed bit sold separately).
  • Makita BL Brushless motor combined with x2 LXT technology delivers no-load drilling speeds of 0-350 RPM and 0-1, 400 RPM for maximum efficiency.
  • Automatic speed change technology adjusts drill speed and torque during drilling for optimum performance.
Check Stock

RUKO 101026 Step Drill Bit HSS SP in Steel Plate

  • Completely in high-alloyed tool high-speed steel..
  • Split point on the tip ensures well-centred drilling and lower required feed rate..
  • The deep cut and spiral-shaped flute ensures absolute smoothness and top cutting performance..
  • Particularly strong swarf is carried cleanly out of the bore as with a spiral drill. This lessens the build up of structural cuts and galling in the bore..
  • The cone makes pulling back from the bore easier..
Check Stock

JET JBM-5 Benchtop Mortiser, 1/2HP, 115V 1PH, 1750 RPM (708580)

  • Durability and Stability: Heavy-duty cast iron and steel construction..
  • Accurate Position Control: Dependable rack-and-pinion head adjustment..
  • Optimal Handle Position: Long, multi-position mortising handle lets you reposition the feed handle for easier operation..
  • Three-Jaw Drill Chuck: Keeps a positive grip on mortising bits with up to 3/8" diameter shanks..
  • Easy Chuck Changes: Two hinged side doors allow easy access to the drill chuck..
Check Stock

Chicago Latrobe - 69900 157 Series High-Speed Steel Short Length Drill Bit Set with Metal Case 118 Degree Conventional Point, Inch, 29-piece, 1/16\ - 1/2\ in 1/64\ increments

  • Set of 29 short length drill bits includes inch sizes 1/16" through 1/2" in 1/64" increments.
  • High-speed steel (HSS) provides hardness for wear resistance.
  • Uncoated (bright) finish is an untreated surface that can be used on a range of materials, especially soft metals.
  • 118-degree conventional point for a range of drilling applications.
  • Short length drill bits have the strength and rigidity required for heavy-feed rate applications.
Check Stock

Chicago Latrobe 69901 157 Series High-Speed Steel Short Length Drill Bit Set with Metal Case, Bright Finish, 118 Degree Conventional Point, Letter Size, 26-piece, A - Z

  • Set of 26 short length drill bits includes one each of letter sizes A through Z.
  • High-speed steel (HSS) provides hardness for wear resistance.
  • Uncoated (bright) finish is an untreated surface that can be used on a range of materials, especially soft metals.
  • 118-degree conventional point for a range of drilling applications.
  • Short length drill bits have the strength and rigidity required for heavy-feed rate applications.
Check Stock

Patioer Hole Cutter, 1-5/8" to 8" (40-200mm) Adjustable Hole Saw Cutter, with ABS Dust Shield for Recessed Lights, Ceiling Speakers, Vent Holes

  • Adjustable Hole Saw Cutter: This kit includes 1x adjustable hole saw with two replaceable pilot drill bits (1 x auger type self-feed pilot bit +1x HSS pilot bit), 2x high speed cutting blades,1x ABS dust shield, 1x adjustment hex wrench, 5x brad-point wood drill bits and 5x Masonry drill bits, 1x carpenter pencil, 1x 3m tape measure and 1x durable storage case..
  • Size Adjustable: Twin blade hole cutter for cutting 1-5/8" to 8" (40 - 200mm) holes to 8" (40 - 200mm) holes with depth up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides..
  • Application: It can be used to cut plywood, sheetrock, veneer, cement board, slate, ceiling tiles, etc. A practical tool set for carpenters, home decorators, contractors, professionals and DIY home owners..
  • Easy To Carry: The hole saw cutter comes with a sturdy carry case for easy storage and organize. Easy and convenient to carry. Improve work efficiency..
Check Stock

Senco DS232-AC 2" Corded 2500 RPM Auto-Feed Screwdriver 7U0001N

  • High torque motor for driving into dense material.
  • Drive drill point fasteners with variable speed trigger.
  • Depth of drive lock ensures same countersink every time.
Check Stock

Oklahoma Joe s 4866405R06 Smoker Grommet Kit with Drill Bit Gold/Black

  • The Oklahoma Joe’s Smoker Grommet Kit creates a direct-access feed for your temp probe cables to easily monitor the internal temperatures of your....
  • Kit includes 2 temperature grommets, drill bit and instructions for easy installation.
  • Flexible holes to feed temp probes into cook chamber while maintaining cook temperature and preventing damage.
  • Quality, heat-resistant, food-grade silicone construction for durability.
Check Stock

Fein JME Holemaker III High Powered Endurance Magnetic Base Drill with 2\ Maximum Drilling Depth - 3/4\ Straight Shank, 1,100 W, 590 RPM - 72705961090

  • The optimal drilling speed designed for use with carbide and hss cutters on the toughest jobs and applications.
  • Effective solution for customers drilling harder materials.
  • Improved magnet for easier placement and better holding power on thinner material.
  • Cost effective drill for running with Carbide cutters which offer longer life, higher cutting rate and capable of cutting harder materials. Also running with standard HSS cutters with great results..
  • Extemely wear resistant concept with durable newly designed polyurthane motorhousing for use in industry and manual trades..
  • Side-reversible feed handwheel with hexagonal hub.
  • Extemely lightweight drill yet powerful enough for heaviest drilling applications..
Check Stock

SharCreatives Adjustable Hole Saw Cutter Kit with ABS Dust Shield for Recessed Lights, Ceiling Speakers, Cornhole Boards Cuts Plywood Sheetrock Plaster Fiberglass Plastic, 1-5/8" to 8" (40-200mm)

  • to 8" (40 - 200mm) holes with depth up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides..
  • ✔ PROFESSIONAL HEAVY DUTY WITH IMPRESSIVE DESIGN AND QUALITY - This kit includes one professional grade adjustable hole cutter with two replaceable pilot drill bits (1x auger type Self-Feed pilot bit + 1x HSS pilot bit), two sets of replaceable cutting blades (1 set of high speed steel blades + 1 set of tungsten carbide blades), one ABS dust shield, one adjustment hex wrench, 5 Pcs brad-point wood drill bits and 5 Pcs Masonry drill bits 5/32", 3/16", 1/4", 5/16, 3/8", one 2m tape measure.
  • ✔ COMFORTABLE, CONVENIENT AND EFFECTIVE - Drill bits are effective for drilling that achieves precision and prevents walking. This single hole cutter kit replaces dozens of hole saws for faster, safer, easier cutting of exactly the hole size needed saving you time and money..
  • ✔ WELL ORGANIZED IN THE CARRYING CASE - heavy-duty, easy to carry plastic organizer to help keep the parts well organized.
  • ✔ PROFESSIONAL AND PERSONAL USE this hole cutter kit is id....
Check Stock