ReviewsHigh Frequency High Voltage

36V Electric Bike Charger 42V2A Out Put Lithium Battery Charger 10 Series Male 3-Pin XLR Socket / Connector

  • Input Voltage: Nominal Voltage:100-240Vac Variation Range:90-264Vac Nominal Frequency:50/60Hz Variation Frequency:47-63Hz.
  • The shell is made by High-quality plastic, smooth appearance, have no impurities..
  • Short Circuit Protection/ Over current Protection/ Over Voltage Protection.
  • Red light -- charging , green light -- charge OK, it stop automatically....
  • The precision of our product's current between±0.1A, the voltage tolerance is±0.1V, absolutely not virtual marking..
Check Stock

YUCHENGTECH Ionizing Air Blower Static Eliminator Anti Static Fan HFAC ESD Ionizer Fan Anti Static Blower (110V)

  • 1.【High-frequency AC】◈ Frequency up to 68000Hz, with high ion density, and better effect of removing static electricity. (Traditional Low Frequency: 50 / 60Hz)..
  • 2.【Upgrade dual cleaning function】◈ With automatic cleaning and manual cleaning function, built-in cleaning brush, set cleaning time, can clean automatically.
  • needle seat can be disassembled freely, also can be cleaned manually, convenient for maintenance..
  • 3.【Fast to remove static】◈ Ionizing air blower adopts high frequency technology, with large air volume, widely air flow coverage area and high efficiency electrostatic removal..
  • 4.【Tungsten Alloy Ion Needle】◈ Compared with ion needles of other materials, tungsten alloy ion needles contain tungsten up to 99% and have good ion balance, quickly neutralize static electricity,the service life can reach 20000 hours..
  • 5.【Ionizing Air Blower】◈ Discharge Time: .
Check Stock

(2) JBL Pro JRX212 12\ 2000w Professional Passive PA/DJ Speakers 8 Ohm JRX 212

  • Features: JBI Pro JRX212 12" 1000 Watt 8 Ohm Passive PA/DJ Speaker. JBI 12 in low frequency driver with a 64 mm (2.5 in) diameter edge wound ribbon voice coil. JBI 2414H-C 25 mm (1 in) polymer diaphragm compression driver. Advanced network topology crossover design.
  • High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure. SonicGuard protects the high frequency driver from excess power without interrupting the performance..
  • Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Specifications: Power Rating : 250 W / 1000 W. Frequency Range (-10 dB) : 60 Hz - 20 kHz. Frequency Response (3 dB) : 80 Hz - 18 kHz.
  • Sensitivity (@1m) : 98 dB SPL (1w/1m). Nominal Impedance : 8 ohms. Recommended Amplifier Power : 250 W to 500 W into 8 ohms. Maximum SPL : 128 dB. Nominal Dispersion : 90 x 50. Crossover Frequency : 2.1 kHz. Dimensions (H x W x D) : 584 mm x 399 mm x 325 mm (23 in x 15.7 in x 12.8 in).
  • Weight : 19.5 kg (43 lb). High Frequency Driver : JBI 2414H-C 1" exit compression driver mounted on Progressive Transition Waveguide. Low Frequency Driver : JBI M....
Check Stock

[2 Pack] DC-DC 5A Buck Converter 4-38V to 1.25-36V Step-Down Voltage Regulator High Power Module with LED Display

  • 【High Precision】The buck converter consists of 36u thickened circuit boards, high-Q inductance with output LED indicator, and superior solid-state capacitors that can effectively filter out high frequency noise. Suitable for various electronic projects..
  • 【Input Voltage】DC 4V to 38V (input voltage must be 1.5V higher than the output voltage, no boost)..
  • 【Output Voltage】DC 1.25V to 36V voltage is continuously adjustable, maximum output current is 5A..
  • 【Mini Size】62*38*14 mm (with potentiometer). 2 sets included..
  • 【Easy to DIY】Connect to power source, using a mini screwdriver to increase or decrease output voltage by adjusting the screw on the blue potentiometer and monitor voltage with multimeter to get the needed voltage, clockwise to step up voltage and counterclockwise to step-down voltage. (Factory default stays a high voltage, you need to contrarotate about 7-15 circles before the voltage starts ramping down, 1 circle means +/- 1V).
Check Stock

2 JBL Pro JRX215 15 2000w Professional Passive PA/DJ Speakers 8 Ohm JRX 215

  • Features: JRX215 15" Two-Way Sound Reinforcement Loudspeaker System. JBI 15 in low frequency driver with a 64 mm (2.5 in) diameter edge wound ribbon....
  • High-voltage capacitors and inductors with massive cores and heavy gauge wire. Progressive Transition high frequency waveguide. 19 mm (.75 in) MDF....
  • Non-resonant, all-steel handles. 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10. Details: Power....
  • Nominal Impedance : 8 ohms. Recommended Amplifier Power : 250 W to 500 W into 8 ohms. Maximum SPL: 129 dB. Nominal Dispersion : 90 x 50. Crossover....
  • High Frequency Driver : JBI 2414H-C , 1" exit compression driver mounted on Progressive TransitionWave guide. Low Frequency Driver : JBI M115-8A.....
Check Stock

Valefod 10 Pack DC to DC High Efficiency Voltage Regulator 3.2-35V to 1.25-30V Buck Converter DIY Power Supply Step-Down Module

  • 【High Precision】The buck converter consists of 36u thickened circuit boards, high-Q inductance with output LED indicator, and superior solid-state capacitors that can effectively filter out high frequency noise. Suitable for various electronic projects..
  • 【Input Voltage】DC 3.2V to 35V (input voltage must be 1.5V higher than the output voltage, no boost)..
  • 【Output Voltage】DC 1.25V to 30V voltage is continuously adjustable, maximum output current is 3A..
  • 【Mini Size】45 * 23 * 14 mm (with potentiometer). 10pcs included..
  • 【Easy to DIY】Connect to power source, using a mini screwdriver to increase or decrease output voltage by adjusting the screw on the blue potentiometer and monitor voltage with multimeter to get the needed voltage, clockwise to step up voltage and counterclockwise to step-down voltage. (Factory default stays a high voltage, you need to contrarotate about 7-15 circles before the voltage starts ramping down, 1 circle means +/- 1V).
Check Stock

RioRand PWM DC Motor Speed Controller Switch Control 7-70V 30A Fuse

  • Wide voltage input 7-70V, maximum output current 30A .Adjustable potentiometer soft cable(about 15CM) can be separated, with running stop brake function.
  • Can be use on long hours of work: Circuit optimization design, stable Adjust the motor smooth no noise no vibration, with power indication, wide duty cycle adjustment range.
  • Using imported high-voltage MOS tube, three pressure 100V high-frequency low-resistance capacitors, automotive fuses.
  • Adjust the motor smooth no noise no vibration, with power indication, wide duty cycle adjustment range.
  • PWM Frequency and Share Space: 12KHZ ,The knob has a switch function, which can control the motor speed from 0% to 100%..
Check Stock

Keeptop Non-Contact Voltage Tester - Electrical Tester with Dual Range AC 12 to 1000V, Live/Null Wire and Circuit Tester, Voltage Detector with Flashlight and Pocket Clip

  • Super Large LCD Screen -- Compared with other voltage testers, our screen is 6.6 larger than their testers, and the high resolution screen will show 3 test results, such as the volt, frequency and analog bar.
  • Non-Contact & 8 LED Indicators -- Non contact voltage detection ensures the safety of testing, and 8 LED Indicators in 3 colors display (Green, Yellow, Red) help to distinguish the detected voltage intensity easily.
  • Auto-ranging Digital Multimeter -- Designed for the novice. Plug the test leads only, the multimeter tester can smart to test voltage DC or AC frequency, resistance, as well as continuity.
  • Perfect Helper for Electrical Issues -- SUETTLA X1 Volatge tester arrive CAT II 600V safety level, help to detect the null/live wire, breakpoint locate, AC/DC volts testing, Ohm measure etc, to save the high service fees..
  • Fastest Reading Speed -- With upgraded chips, greatly increase the sensitivity, make the voltage multimeter tester measuring in 0.2s (5 times/s).
Check Stock

dbx 286s Microphone Preamp & Channel Strip Processor, Mono 4-Way

  • Studio quality mic preamp/channel strip processor.
  • Classic dbx compression puts great sound within easy reach.
  • Frequency tuneable de-esser reduces sibilance and high frequency distortion.
  • Enhancer increases the detail and definition of the high and low frequencies.
  • Program adaptive expander/Gate. Frequency response: 20Hz to 20kHz.
  • Operating voltage: 120VAC 60Hz, 100VAC 50/60Hz.
  • Purchase includes: dbx286s, power cord, operation manual, and rack mount screws and washers (x4).
Check Stock

WGGE AC Voltage Tester/Non-Contact Voltage Tester with Dual Range AC 12V-1000V/48V-1000V, Electrical Pen with LCD Display and Flashlight Buzzer Alarm, Detect Wire Breakpoint, Live/Null Wire Tester

  • ...insulation, The tester will flash and beep when the device close to AC Voltage greater during the specified Voltage range without touch the measured object, to ensure the safety of the human body, more convenient monitoring..
  • Safely Sound & light Alarm Tester Pen- distinguish the live and Null wire through different frequency alarm sound. The higher the voltage, the higher the audible alarm frequency and rate of flashing lights great, even in noisy environments..
  • Accurately Multi-ranging Measurement - The electrical tester accurately detects AC Voltage ranging from 12V to 1000V, and distinguish them into 3 Voltage levels (low, moderate, high). NCV sensitivity automatically adjusts from low, medium and high while indicating Voltage level with audible beep..
  • Low Voltage Indicator & LED Light - The shining prompt of low voltage LED and alarm of the power tester pen can warn you to replace the battery in time, while the LED light allows operation even in dark environment..
  • Auto Power Off Tester -The electrical tester operated with 2 x 1.5V AAA batteries(not included), auto power off after no operation for 3 minutes to save energy. Lightweight, durable construction with convenient pocket clip, a perfect handy tool for electricians or daily use..
Check Stock

A Dark Heart (Elders and Welders Chronicles Book 2)

  • ️【★TIG&ARC Strong Point】High Frequency Start TIG,Non-Contact Arc Initiation That Reduces Tungsten And Material Consumption.Rated Input Frequency 50/60Hz, Duty Cycle 85%,Improves The Performance Of The Welding Machine..
  • ️【★Feature】TIG/ARC 2-in-1,Tig& ARC Welder With Tig Torch, Earth Clamp, Electrode Holder,Welding Tong.
  • ️【★Portable And Powerful】TIG Welding Thickness 0.3-4.8mm,Stainless Steel, Alloy Steel, Mild Steel, Copper, Cast Iron And Chrome.ARC Welding Thickness 15-42mm.
  • ️【★Energy Saving】Portable Handle Makes It Easier To Operate, The Lightweight Makes It More Convenient To Carry.Suitable For Stainless Steel, Alloy Steel, Carbon Steel, Copper, Copper Alloy And Other Non-ferrous Metal Welding.
  • ️Automatic Compensation For Voltage Fluctuation, Over-voltage Protection, Under Voltage Protection, Over Current Protection, Over Load Protection.
Check Stock