ReviewsHigh Input output Voltage Differential

Micsig 700V 100MHz High Voltage Differential Probe kit 3.5ns Rise Time 10X/100X Attenuation Rate Oscilloscope Probe Kit Accessory DP10007

Widely Used: The attenuation rate is 10X/100X, widely used in any brand of oscilloscope..
Maximum differential test voltage (DC+ACPK-PK): 70V (10X), 700V (100X). You can safely measure floating voltages up to 700V and have a bandwidth up to 100 MHz..
Easier and Safer Use: High voltage differential probes sample high impedance isolation between input and output to protect person safety. Power supply USB DC 5V output, more portable while Oscilloscope has USB interface..
Versatile Kit: All 6 pieces with three different connectors help to test various on different occasions, including 2 alligator clips, 2 hook clips and 2 pincer clips..
Applications: Floating Measurements, Switch-Mode Power Supply (SMPS), Motor Drive Design, Power Device Testing & Evaluation, Power Converter Testing & Design..

The TL072 JFET-input operational amplifiers incorporate well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit. The devices feature high slew rates, low-input bias and offset currents, and low offset-voltage temperature coefficient..
Low Power Consumption, Wide Common-Mode and Differential Voltage Ranges, Low Input Bias and Offset Currents.
Output Short-Circuit Protection, Low Total Harmonic Distortion: 0.003% (Typical), Low Noise Vn = 18 nV/√Hz (Typical) at f = 1 kHz.
High-Input Impedance: JFET Input Stage, Internal Frequency Compensation, Latch-Up-Free Operation.
High Slew Rate: 13 V/µs (Typical), Common-Mode Input Voltage Range Includes VCC+, Example Applications: Motor Integrated Systems: UPS, Drives and Control Solutions: AC Inverter and VF Drives, Renewables: Solar Inverters, Pro Audio Mixers, DLP Front Projection System, Oscilloscopes.

Typical Supply Current: 200 µA (Per Amplifier), Latch-Up-Free Operation, High Slew Rate: 3.5 V/µs Typical.
Wide Common-Mode and Differential Voltage Ranges, Low Input Bias and Offset Currents.
Common-Mode Input Voltage Range Includes VCC+, Output Short-Circuit Protection.
High Input Impedance: JFET-Input Stage, Internal Frequency Compensation.

Low Power Consumption: 1.4 mA/ch Typical.
Low Input Bias Current: 30 pA, Typical Low Input Offset Current: 5 pA Typical, High Slew Rate: 13 V/μs Typical.
Output Short-Circuit Protection, Low Total Harmonic Distortion: 0.003% Typical, Wide Common-Mode and Differential Voltage Ranges, Common-Mode Input Voltage Range Includes VCC+.
High Input Impedance: JFET Input Stage, Latch-Up-Free Operation.
Example Applications: Tablets, White goods, Personal electronics, Computers.

Wide Common-Mode and Differential Voltage Ranges, Low Input Bias and Offset Currents.
Output Short-Circuit Protection, Low Total Harmonic Distortion: 0.003% (Typical), Low Noise Vn = 18 nV/√Hz (Typical) at f = 1 kHz.
High-Input Impedance: JFET Input Stage, Internal Frequency Compensation, Latch-Up-Free Operation.
High Slew Rate: 13 V/µs (Typical), Common-Mode Input Voltage Range Includes VCC+, Example Applications: Motor Integrated Systems: UPS, Drives and Control Solutions: AC Inverter and VF Drives, Renewables: Solar Inverters, Pro Audio Mixers, DLP Front Projection System, Oscilloscopes.

16 opto isolated digital inputs,3 opto isolated digital outputs. ARM9 main control chip,FPGA core algorithm chip..
Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version..
4 axle motor Control.Differential Pulse and direction output signal,maximum.500Khz per axle..
Handwheel Three Output:Voltage, Single-Ended, Differential.
USB flash disk support for G code file input,no size limited of the G-code file..

Hall Switch Integrated Circuit Using hall Effect Principle..
USES The Semiconductor Integrated Technology Manufacturing Magnetic Susceptibility of the Circuit..
It is by the Voltage Regulator, Hall Voltage Generator, Differential Amplifier, Schmidt Triggers, Temperature Compensation and the Open Collector Output Stage Circuit Composed of Magnetic Sensitive Sensor Circuit..
Its Input For the Magnetic Induction Intensity, the Output is a Digital Voltage Signal..

Power supply: 5V-24V can be, but depends on how much the baby with the voltage output (if the customer requires output 5V voltage, then the AD62X series of chips is about ± 3.8V power supply, the regulator chip itself has a pressure difference, so it is recommended that the voltage is higher than 12V single Power supply is better).
Bandwidth: AD620/623 is lower than 50KHz at high gain and greater than 1MHz at low gain Input signal type: single-ended signal or differential signal.
The maximum magnification: more than 2000 times (actual measurement), due to the gain assembly resulting in greater fluctuations in the waveform band, it is recommended to use high-gain multi-stage amplification.
Saturation output amplitude: AC peak 10Vpp (±5Vpp).
This module can be enlarged 1000 times, the circuit layout is regular, MINI, design layout and wiring are reasonable.

The AD8015 is a wide bandwidth, single supply transimpedance amplifier optimized for use in a fiber optic receiver circuit. It is a complete, single chip solution for converting photodiode current into a differential voltage output..
The 240 MHz bandwidth enables AD8015 application in FDDI receivers and SONET/SDH receivers with data rates up to 155 Mbps. This high bandwidth supports data rates beyond 300 Mbps. The differential outputs drive ECL directly, or can drive a comparator/ fiber optic post amplifier..
In addition to fiber optic applications, this low cost, silicon alternative to GaAs-based transimpedance amplifiers is ideal for systems requiring a wide dynamic range preamplifier or singleended to differential conversion..
Application: Fiber Receiver: SONET/SDH, FDDI, Fibre Channel Stable High Capacitance Detector.