ReviewsHigh Machining Speeds

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4\ Overall Length, 0.1875\ Cutting Diameter, 0.1875\ Shank Diameter

Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
Four flutes produce a better finish than fewer flutes.
Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.

Check Stock

YG-1 - 55901 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter

Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
Four flutes produce a better finish than fewer flutes.
Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.

Check Stock

YG-1 E5023 Carbide Square Nose End Mill, Double End, TIALN Multilayer Finish, 30 Deg Helix, 4 Flutes, 2\ Overall Length, 0.140625\ Cutting Diameter, 0.1875\ Shank Diameter

Double-end square end mills create sharp, unrounded cuts and have cutting edges on both ends for longer tool life.
Suitable for general-purpose machining on steel, chromium-nickel steel, and malleable cast iron.
Stub length increases the strength of the tool, making it less likely to break in the workpiece.
Four flutes produce a better finish than fewer flutes.
Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than uncoated finish, TiN coating, and TiCN coating.

Check Stock

3PCS BAP300R C10-10-120-1T/C12-12-130-1T/C12-13-130-1T 1Flute Indexable End Milling Holder+ 6PCS APMT1135PDER CNC Inserts+3PCS T8 Wrench (3PCS 300R End Milling Holder)

* Package includes ：1PCS 300R C10-10-120-1T +1PCS 300R C12-12-130-1T+1PCS 300R C12-13-130-1T+ 6PCS APMT1135PDER + 3PCS T8 wrench. If you need more APMT1135PDER, please search ASIN：B097RG372M..
* High performance replaceable inserts, anti-seismic high-quality alloy steel, can effectively suppress vibration..
* It is suitable for rough machining, finish machining, digging machining, groove machining and cutting machining..
* The screw offset fastening design makes the inserts and groove closely combined, enhances the rigidity, and the processing effect will be better..
* The handle strictly abides by the process of first vacuum quenching and then tapping to avoid the deformation caused by first tapping and then quenching. It is firm and durable and can prolong the service life..

Check Stock

ISCAR DGR2202C-6D IC328 Carbide Parting Inserts Cutter Tools Cutting Holder Grooving Inserts CNC

A thin PVD coated TiCN layer on a tough substrate, for milling, parting, and grooving mainly steel and stainless steel at low to medium cutting speeds especially in unstable machining conditions.
Grade or Coating Type: PVD / Coating Layers: TiCN.
ISO Range - P/M/K(P25-P40)(M30-M40) / ISO Range - N/S/H (S20-S30).
Iscar DO Grip inserts are first choice for soft materials, parting of tubes, small diameters, and thin-walled parts.

Check Stock

TECHTONGDA Mini Milling Machine MT3 Mill Drill Machine Benchtop Mill/Drill Milling Drilling Machine Brushless Motor Variable Speed with Digital Readout 110V 1100W

⚒️ The Mini Milling Machine with drilling, milling groove, plane milling chamfering and other functions, suitable for all kinds of metal, wood and other materials fine processing, widely used in machinery manufacturing,woodworking DIY and so on..
⚒️ Machine head tilt, Spindle incline Angle: ±90°(The nose can actually rotate 360 degrees), Spindle taper: MT3, Max. drilling diameter: 0.9"(25mm), Distance from spindle to table: 13.8"(350mm), Spindle stroke: 2"(52mm), Table size: 27.5"*7.1"(700mm*180mm).
⚒️ 1100W Strong Power. The Benchtop Mill/Drill Machine with 1100W brushless motor, Infinitely Variable-Speed, The Range of spindle speeds: 50-2250rpm.
⚒️ Spindle high precision feed, one piece steel handle bar, hand wheel adjustment with fine adjustment switch, high precision machining, accurate to 0.01MM..
⚒️ Widened working table: 27.5"*7.1"(700mm*180mm), artificial fine grinding, integrated casting, T-slot convenient fixture fixation. High quality and Durable..

Check Stock

Drill America-DMOCCD2-60 2 Solid Carbide Combined Drill Bit and Countersink DMO Series

Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems.
Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Round shanks allow use with a wide variety of toolholding systems.
When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.
Used for producing center holes in work pieces which require machining between centers.

Check Stock

Lovejoy Size D12B Universal Joint, 1\ Round Bore and 1\ Round Bore, 1/4\ x 1/8\ Keyways, 2.00\ Outer Diameter, 5.44\ Overall Length

Single pin and block universal joint for applications with up to 25 degrees angular misalignment and speeds up to 1,750 RPM.
Compensates for angular misalignments and shaft separation.
Bored hubs fit onto shafts without the need for machining.
Operating temperatures range from -30 to 212 degrees F.

Check Stock

10Pcs Lathe Mill Center Centering Drill Bit Set HSS 60 Degree Combined Countersink Bits

【High Quality Material】 The product is made of high-quality high-speed steel materials, double-edged, standard milling angle of 60 degrees, durable..
【Safe to Use】The product is manufactured in accordance with strict quality standards before leaving the factory, with good safety performance and can be used with confidence..
【Precision Machining】Prefabricated precise positioning for hole processing, guide the drill for hole machining, so reducing error, center hole machining for the end surface of the shaft and other parts..
【Lathe Mill Center】The center is used to make tapered holes for the center of the lathe in order to keep the standard twist drill in place so as to prevent the screw from slipping or deviating..
【Quality Service】 We strive to provide you with high quality and convenient service. You are welcome to contact us if you have any problem about our product, we will give you a satisfactory reply..

Check Stock

35 Pack 1/4 Abrasive Flap Wheel Sander Set WENORA 80 Grit Aluminum Oxide Flap Wheels Cylindrical Shape Sanding Wheel 7 Sizes

【PREMIUM MATERIAL】 High quality aluminum oxide coated abrasive cloth provides a solid and durable grinding power combined with high efficiency and long life to give you that premium performance that you need and expect from your tools..
【SHANK DESIGN UPGRADE 】 we upgraded the ordinary round shank to 1/4-Inch hex shank to improve the firmness at high speeds. Even in large-area heavy-duty machining, there will be no loosening or slipping..
【METALWORKING APPLICATIONS】 The mounted flap sanding wheels are commonly used in metalworking as a grinding or deburring wheel to clean up welds and cuts in iron, stainless steel and metal alloys. Also used for removing layers of rust and paint on flat metal surfaces.
【WOODWORKING APPLICATIONS】These abrasive wheels suitable to be used as sanding wheels for electric drills, cordless drills, die grinders and.for the stripping of old layers of paint when during resurfacing projects or sanding and finishing contoured wood surfaces..
【VARIETY OF WHEEL SIZES】Our 35 piece set includes (5) 1” thick sanding wheels with 1/4” hex shank in each of the 7 different sizes.
0.78", 1", 1.2", 1.58", 2", 2.36" and 3.14" widths.

Check Stock

uxcell Spotting Drill Bits 5mm Dia 5mm Shank 60 Degree Solid Carbide AlTiSin Coated 2 Flutes Round Shank Drilling Cutter

Spotting Drill Bits: Cutting Edge Diameter: 5mm / 0.2".
Total Length : 50mm / 2.0". Large spiral flutes provide neat and smooth cuts. Spiral groove facilitates the export of metal chip..
Wide Applications: Widely used for drilling steel below HRC60, such as stainless steel, carbon steel, die steel, alloy steel. The AlTiSin composite coating has high hardness, high wear resistance and high thermal stability..
Carbide Tool: Made of fine-grained tungsten carbide, the drill bit has good toughness, high hardness (HRC92), wear resistance and heat resistance. With good cutting strength and drilling effect, carbide tool offers long tool life and faster cutting speeds than other substrates..
Easy to Use: Universal chamfered round shank, easier clamping, stable cutting process. Suitable for CNC machining centers, CNC machine tools, precision engraving machines and other equipment. The longer the length of the tool clamped by the chuck, the better..
Tips: If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life. Select an appropriate feed rate and cutting speed to improve the tool life and obtain better processing accuracy and performance..

Check Stock