ReviewsHigh Position Jack Stand

OTC 1540 4-Ton Capacity Fork Lift Jack

OTC's 4-Ton (8000 lb.) Capacity Fork Lift Jack features a low starting height of 2-5/8 inches and a maximum lifting height of 16-1/4 inches.
Two-position lift pad permits handling of all lift truck configurations with flat or edged surfaces.
Jack features include high-quality seals and high-strength steel construction.
30 inch long handle, with stop, makes for easy maneuverability around the shop or workspace.
Rugged construction and high-grade materials ensure quality performance over the lifetime of the jack.

Check Stock

RVGUARD RV Stack Jacks 4 Pack with Storage Bag Aluminum Stabilizer Jacks for RV Trailer Camper Single Support Up to 6000 Lbs Adjustable from 11 to 17

【What will You Get】4 Pack RV Stack Jacks come with a colorful storage bag, which are ideal for stabilizing and leveling your RV, great stabilization solution for your RV, trailer and camper, etc.
【Make Your RV Stable】These RV stabilizer jacks are made of durable cast aluminum, anti-rust & corrosion resistant, with square base design, each can support up to 6000lbs, with which you needn’t to worry about your RV move or bounce anymore.
【Height Adjustable】The height of the RV stabilizing jack can extend from 11" to 17", they may not rise very high, thus are recommended to use for lower to the ground rigs for sure. Please Note: These jacks are only for stabilization usage. Do Not Use To Raise.
【Easy to Use】Simply position each stack jack stand underneath your RV, and spin the “T” shape handle to raise it to the proper height to reach appropriate leveling and stabilization. Recommend placing wood or concrete blocks under jacks for better use.
【Lightweight & Portable】 These RV jack stands weight less than 40 lbs in total, and they come with a colorful organize bag.
besides, when not use, they can be compact nested together for easy storage.

Check Stock

OTC 1750A 6000 lb. 'Revolver' Diesel Engine Stand with Universal Engine Adapter Assembly

OTC's Diesel Engine Stand features robust materials and construction to effortlessly support heavy truck diesel engines or transmissions for rebuilding and other procedures.
96-to-1 ratio worm and gear set smoothly rotates the mounted engine a full 360 degrees for easy access to any component or location on the engine.
Built-in 12-ton jack raises the engine or transmission on the stand to provide the swing radius necessary for full rotation clearance.
2 large metal front wheels and 2 rugged rear casters allow for full maneuverability of the stand, loaded or unloaded.
Included No. 205061 Universal Engine Adapter Assembly permits use with a wide variety of mounting plates (not included) that fit most heavy duty diesel engine and transmission applications.

Check Stock

Heavy-Duty Malleable Casting Iron Wall Jack for Lifting Wall Beams Decks and More with Capacity of Lifting 1,000 lbs, Red, Pack of 1

1.Lifting Wall Easily – Designed to lift up walls, beams, or more into the vertical position or the desired position..
2.Work Alone – Allows a single person to safely raise a fully sheathed wall by the wall jack, lifting a wall with no help.
NOTE: Do not stand under the wall when working.
For large walls, two wall jacks are recommended in use..
3.Casting Iron – Made of heavy-duty and durable malleable casting iron which is weather-resistant and reusable.
4.1 " OD Pipe and 2" x 4" Pole – OD 1" pipe can be used as a lever that wall will be lifted up along the 2"x 4" (actual size is 1.5" x 3.5") pole. NOTE: Please use a clear straight-grained 2" x 4" pole that is free of all knots or defects.
5.Package Included - 1 pack of Wall Jack (1” pipe and 2"x4" pole are not included).
Backs its products with 90 days warranty.
Please feel free to contact us with any questions you may have..

Check Stock

CARTMAN Car Jack Stands, 2 Ton (4,400 lb) Capacity Steel Car Lifting Stand, Self-Locking Ratcheting Jack Design for Quick Adjustment, Automotive Jack Stand Sets for UTV ATV Van Sedan, 1 Pair

Constructed with the sturdy stamped steel with a welded frame design for durability..
Pair of 2 ton jack stands with 4000 lbs capacity total (when used together) help support vehicles after lifting with a jack..
Multi-position forged iron ratchet bar has a sawtooth design, allowing for quick height adjustments from 10.6" to 16.5"..
Wide pyramid foot base and large top saddle provide enough stable support to keep safety. Use on a level surface! Always use a jack stand on flat, stable ground..
Meets US safety standards and includes a limited 2-year manufacturer warranty..

Check Stock

Dulytek DHP20 Hydraulic All-in-One Heat Press Machine 20-Ton Force with Driptek Mount Stand Enclosed

POWERFUL & EFFICIENT: Maximum Pressing Force Up To 20 Tons.
Removable 40000 psi Ram Hydraulic Jack Ensures Successful Pressing at Relatively Low....
LIKE DHP7 BUT MIGHTIER : 3" x 8" Dual Heat Plates with Precise Two-Channel Temperature Control & Press Timer.
DRIPTEK FEATURE: New DripTek Mount Stand Can Tilt DHP20 Press UP To 90 Degrees And Hold The Position While Fresh Concentrate Flow Dripping Off Plates....
Ergonomic Handle Design Allows You to Move the Press Conveniently.
DISCREET PACKAGING: DHP20 Press, DripTek Mount Stand, Operation Manual, Enhanced Pump Handle..

Check Stock

BESTOOL Jack Stands 4 ton Jack Stand with Security Locking Pins, 8,000 lbs Capacity, 1 Pair, Black

BESTOOL jack stands uniquely designed circular base pads flat top rubber saddle protects the car frame better than the traditional curved axle post jacks stands. Provide maximum stability and safety, non-slip pad can be disassembled, replaced..
This car jack stand features mobility pin height adjustment mechanism provides 7 adjustable positions. Making it flexible for all of your needs and provides added security..
The rubber circular base pad protects against scratching paint. Stand has a powder coated finish to prevent rusting.The minimum height of this jack is 13.4 inches and the maximum height is 19.9 inches with a 4 ton (8,000 lb) load capacity..
Jack stands 4 ton constructed of high-grade forged steel with a welded frame design for durability.Wide pyramid foot base provides added strength and stable support..
This jack stand is perfect for modern low ground clearance cars. it handles a wide range of vehicles including small cars, SUVs, and light duty trucks, jeeps, ATV's, UTV's, and more..

Check Stock

Toolly 4 Packs Floor Jack Pad Adapter for Jack Stands 2-4 Ton Universal Heavy Duty Rubber Jack Disk Pads Slotted Frame Rail Pinch Welds Protector for Lifting Car

...each style.Different size and shape could meet your various needs..
Made of High-quality heavy duty rubber, super Construction and Durable, Soft enough to resist pressure for your floor jack While sturdy enough to support you jack point. Perfectly suitable for 2-4 ton jack stand. Please verify dimensions and ensure fitment to your jack and vehicle..
Round Type Jack Pads: 71mm Diameter 43mm Height, Slot Dimensions: 13mm Wide 13mm deep. V-Type Jack Pads: Length-60mm, Hight-50mm, Width-44mm, Groove depth-15mm..
Toolly jack pad adapter is a great protector to prevent your frame rail, specifically pinch welds from bending or scratching while using with a car jack stand..
Our set includes 4Pcs jack pads, Incuding 2Pcs Round Type Jack Pads and 2Pcs V-Type Jack Pads providing the value you need to get the job done right - without sacrificing quality. What's more, they're backed by our 100% manufacturer's warranty - if you aren't happy for any reason, return it for a full refund..

Check Stock

PIIHUSW 3 Way 3.5mm Splitter, Gold-Plated 3.5 (1/8") TRS Male to 3 Female Stereo Audio Cable

3 way 3.5mm splitter, great for your Walkman, PDA, computer, other portable media players and other audio devices.
Connector 1: 3.5 mm Mini-Jack (3 Position-TRS) Male Plug, Connectors 2: 3x 3.5 mm Mini-Jack (3 Position-TRS) Female Jack.
(1/8") TRS Male Plug to 3x Female Stereo Audio Splitter, normally used as 1x Audio Input to 3x Audio Output. Please note this cable can't be used as 3 input to 1 output..
Gold-plated molded 3.5mm connectors with strain relief ensure a solid high quality connection between the connected devices. 3.5mm stereo adapter with fully modeled connectors provide excellent strain relief Shielded to prevent unwanted EMI/RFI interference..
Package: 1x 3 way 3.5mm male to female audio cable. Length: 8.5 inches.

Check Stock

Lippert Components - 314594 T-Bolts - JT s Strong Arm Jack Stabilizer

JT's Strong Arm T-bolts tighten the jack stabilizers when in travel position and lock them down when in camping position, but must always be loosened when raising/lowering jacks.
Replacement T-bolts for tightening any JT's Strong Arm Jack Stabilizer kit systems.
For use only with JT's Strong Arm Jack Stabilizers.

Check Stock

BIG RED ATZ120005R Torin Heavy Duty Pin Type Professional Car Jack Stand with Lock 12 Ton 26,400 lb Capacity Red 1 Pair

Professional heavy-duty jack stand: 12 Ton (26,400 lbs) capacity fits most vehicles.
Strudy welded steel construction for superior safety and strength: Each jack stand is equipped with a large chassis design, which greatly increases....
Adjustable pin included: Designed to support column adjusts to different height positions.
Lift capacity is widely suitable for cars, sedans, trucks,....
Durable and portable: High-quality steel and spray paint make the bracket more durable, with no rusting or breaking.
No risk purchasing with high quality BIG RED automotive repair tools: Complies with safety standards for all products.

Check Stock