ReviewsHigh Power Amplifier Systems

MTX (2) S6510-44 10" 1000w RMS Subwoofers+Vented Sub Box+Mono Amplifier+Amp Kit

  • Package Includes: (2) MTX 10" Subwoofer Car Audio (1) Rockville KRYPTON-M3 4000w Peak/1000w Dyno-Certified RMS Mono 1 Ohm Car Amplifier Amp+Remote (1) Rockville RWK4CU 4 AWG Gauge 100% Copper Complete Amp Installation Wire Kit OFC (1) Rockville Dual 10” Solo Baric L7/L5/L3 Vented Square Sub Enclosure Box 20 Drywall Wood Screws (Wood screws are the type of screws.
  • the screws are actually made of metal) 20 Feet of 14 AWG Blue Speaker Wire 4 Spade Terminals.
  • Features of S6510-44: MTX S6510-44 10" 1000 Watt Peak/500 Watt RMS Square 4-Ohm Car Subwoofer, RMS Power Handling: 500 Watts, Peak Power Handling: 1000 Watts, Recommended Amp Power: 250-500 Watts RMS, Impedance: Dual 4-Ohms, Frequency Response: 26Hz - 130Hz, Sensitivity: 84.5 dB, Volume Displacement: 45.65 cu in, Voice Coil: 2" inches, Mounting Depth: 6.625" inches Cut Out Diameter: 9.313" inches.
  • Features of RDVK10 : Rockville RDVK10 Dual Square 10" 1.2 Cu. Ft. Vented Subwoofer Enclosure. Designed Specifically For The Solo Baric L7/L5/L3 Series Subwoofers and Similar, Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!....
Check Stock

OSD Audio 6 Zone 12-Channel Digital Amplifier, 80W/Channel, Distributed Audio & Home Theater - MX1280

  • HIGH-PERFORMANCE AMPLIFIER: A slim yet robust multi-channel amplifier that supplies reliable power to up to six zones.
  • RESIDENTIAL/COMMERCIAL: Can be configured as the main amplifier for an audio distribution system or as an amplifier for 5.1 or 7.2 home theater systems.
  • AUDIOPHILE-LEVEL AMPLIFICATION: Delivers high-resolution music playback with 80 Watts per channel (1KHz into 4 Ohms), 50W Watts per channel (1KHz into 8 Ohms).
  • CLASS D EFFICIENCY: Uses Class D amplifier technology for low distortion and higher efficiency and special protection circuitry safeguards from thermal overload and short circuits.
  • SLIM DESIGN: Includes front-panel status indicators and slim form factor that is 2U rack-mountable (hardware included).
Check Stock

OSD Audio 4 Zone 8-Channel Digital Amplifier, 80W/Channel, Distributed Audio & Home Theater – MX880

  • HIGH-PERFORMANCE AMPLIFIER: A slim yet robust multi-channel amplifier that supplies reliable power to up to four zones.
  • RESIDENTIAL/COMMERCIAL: Can be configured as the main amplifier for an audio distribution system or as an amplifier for 5.1 or 7.2 home theater systems.
  • AUDIOPHILE-LEVEL AMPLIFICATION: Delivers high-resolution music playback with 80 Watts per channel (1KHz into 4 Ohms), 50W Watts per channel (1KHz into 8 Ohms).
  • CLASS D EFFICIENCY: Uses Class D amplifier technology for low distortion and higher efficiency and special protection circuitry safeguards from thermal overload and short circuits.
  • SLIM DESIGN: Includes front-panel status indicators and slim form factor that is 2U rack-mountable (hardware included).
Check Stock

2 Rockville W12K9D2 12 8000 Watt Car Subwoofers+Mono Amplifier+Copper Amp Kit

  • Package Includes: (2) Rockville W12K9D2 12" 4000w Car Audio Subwoofers Dual 2-Ohm Sub CEA Compliant. (1) Rockville dB16 8000 Watt Peak/2000 Watt....
  • Features of W12K9D2: Rockville W12K9D2 K9 Series 12" Dual 2-Ohm Car Subwoofer. Peak Power Handling: 4000 Watts. Program Power Handling: 2000 Watts .....
  • The voice coil windings are made in the USA!. Double Stacked 190 Oz High Quality Magnet. Cast Aluminum Basket With Black Sanded Finish Makes This Sub....
  • Features of dB16: Rockville dB16 8000 Watt Peak/2000 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Audio Amp. Dyno Certified RMS Power Ratings:....
  • Amplifier Kit Key Features of RWKOCU: 0 Gauge Power Amplifier Installation Kit. Designed specifically for car audio systems over 1000 watts RMS to....
Check Stock

NVX XAPK4 True Spec 4 Gauge 100% Copper Single Amp Wiring Kit with Speaker Cable Mini-ANL Fuse Holder RCA Cables Not Included

  • True 4 gauge amp wiring kit utilizing top-quality materials that allow your amplifier and components to operate to their fullest.
  • Solid Satin chrome-plated brass fuse holder gives ideal protection for high powered audio systems.
  • 4 gauge power car amplifier installation kit designed for audio systems up to 1000 watts RMS Includes Speaker Wire.
  • Made from 100% oxygen-free silver-tinned copper for a pure uninterrupted transfer of power & signal.
  • Flexible, shielded wire that can tolerate heat, vibration and other rough conditions.
Check Stock

Lanzar Amplifier Car Audio, 2 Channel, 1,000 Watt, 4 Ohm, MOSFET, RCA Input, Bass Boost, Mobile Audio, Amplifier for Car Speakers, Car Electronics, Crossover Network (HTG237) , BLACK

  • AUDIO EVOLUTION: This car speakers amp features regulated MOSFET Pulse Width Modulated that maintain rated power over a wide range of battery voltage. Excellent frequency response rates place these amps in a class of their own..
  • SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. Nickel-plated RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound..
  • INTELLIGENT DESIGN: The car audio amplifier 2 channel safety features include power and protection LED indicators.
  • and thermal, overload, and speaker-short protection..
  • RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp..
  • POWER INPUT: The mosfet amplifier connections are for input power, chassis ground,& remote turn-on function. Use 8 gauge wiring for power & ground connections. The terminals will handle up to 4 gauge wiring with no negative effect or distortion of audio..
Check Stock

Hifonics ZG-1800.1D Brutus Gamma 1800W Max Class D Monoblock Car Audio Amplifier (2 Pack)

  • POWERFUL SOUND: Deliver powerful sound to your speakers and subwoofers with this class D, 1,800-watt, monoblock car audio amplifier.
  • MULTIPLE CHANNELS: Does 1800 watts x 1 channel at 1 ohm, 800 watts x channel at 2 ohms, and 400 watts x channel at 4 ohms.
  • MINIMAL DISTORTION: Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion.
  • SECURE CONNECTIONS: Nickel-plated, high-temperature, impact-resistant design with hex screw terminals that allow for secure connections.
  • MAXIMIZES POWER: Easily tie into OEM audio systems that do not offer RCA output to maximize aftermarket amplifier power.
Check Stock

Lanzar B52 Car Audio Amplifier Monoblock 1 Channel 2,000 Watt 2 Ohm RCA Input Bass Boost Mobile Audio Amplifier for Car Speakers Car Electronics Crossover Network HTG137 BLACK

  • AUDIO EVOLUTION: This amplifier car audio features excellent frequency response rates and crossover network that place these amps in a class of their own..
  • SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. RCA connectors ensure a secure connection between amplifier and speakers that allow distortion-free sound..
  • INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators.
  • RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp..
  • GREAT DEAL: Often a monoblock amp comes with a high price tag. Yet the Lanzar mono amplifier is budget friendly with all the features, reducing crosstalk between channels. Please update the listing's title, description, & bullets..
Check Stock

Hifonics ZG-3200.1D Zeus Gamma 3200 Watt Max Power Class D Monoblock Car Audio Amplifier

  • CLASS D, MONOBLOCK AMP: Deliver powerful sound to your speakers and subwoofers with this class D, 3,200-watt, monoblock car audio amplifier.
  • PLENTY OF POWER: Does 3200 watts x 1 channel at 1 ohm, 1600 watts x channel at 2 ohms, and 800 watts x channel at 4 ohms.
  • MINIMAL DISTORTION: Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion.
  • SECURE CONNECTIONS: Nickel-plated, high-temperature, impact-resistant design with hex screw terminals that allow for secure connections.
  • EASILY TIE INTO YOUR SYSTEM: Easily tie into OEM audio systems that do not offer RCA output to maximize aftermarket amplifier power.
Check Stock

Hifonics ZTH-1425.4D Zeus Theta Compact Full Range 4 Channel Car Audio Amplifier Silver – Class D Amp 1400-Watt Onboard Electronic Crossover Built-in Bass Control Bridgeable

  • CLASS D AMPLIFIER - Class D topology ensures high efficiency with big power and a small footprint. This mono amplifier was built for driving subwoofers and subwoofer systems, maintaining the highest sound quality sound for your car audio..
  • BRIDGEABLE - Full range, four channel amplifier with flexible installation allows this amp to run in four channel or bridged mono mode, giving you the options you need to maximize the output of your car audio..
  • BUILT FOR POWERFUL SOUND - Minimize heat generation with the PWM MOSFET power supply providing stability through the PC board. Old school Hifonics aluminum heat sink maintains superior heat dissipation to keep your car audio sounding smooth..
  • CONTROL YOUR AUDIO - Control of amplifier output with onboard electronic crossover to tailor specific frequencies to speakers and subs. LED system protection allows you to monitor overload and speaker shortages with illuminated indicators..
  • HIGH QUALITY CONNECTIONS - Secure molded connection terminal for all power, ground and speaker connections. Angled for ease of access while creating a clean wire management profile, to keep your vehicle looking clean while delivering optimal power..
Check Stock

Hifonics ZTH-1025.4D Zeus Theta Compact Full Range 4 Channel Car Audio Amplifier (Silver) – Class D Amp, 1000-Watt, Onboard Electronic Crossover, Built-in Bass Control, Bridgeable

  • CLASS D AMPLIFIER - Class D topology ensures high efficiency with big power and a small footprint. This mono amplifier was built for driving subwoofers and subwoofer systems, maintaining the highest sound quality sound for your car audio..
  • BRIDGEABLE - Full range, four channel amplifier with flexible installation allows this amp to run in four channel or bridged mono mode, giving you the options you need to maximize the output of your car audio..
  • BUILT FOR POWERFUL SOUND - Minimize heat generation with the PWM MOSFET power supply providing stability through the PC board. Old school Hifonics aluminum heat sink maintains superior heat dissipation to keep your car audio sounding smooth..
  • CONTROL YOUR AUDIO - Control of amplifier output with onboard electronic crossover to tailor specific frequencies to speakers and subs. LED system protection allows you to monitor overload and speaker shortages with illuminated indicators..
  • HIGH QUALITY CONNECTIONS - Secure molded connection terminal for all power, ground and speaker connections. Angled for ease of access while creating a clean wire management profile, to keep your vehicle looking clean while delivering optimal power..
Check Stock