ReviewsHigh Power Capacitors

Martin Logan - ElectroMotion ESL - Hybrid Electrostatic - Each - Black

  • High frequency transducer: XStat CLS electrostatic transducer.
  • Low frequency driver : 8" high excursion, high-rigidity doped fiber cone with extended throw drive assembly, non-resonance asymmetrical chamber format.
  • MicroPerf panel is housed within a radical aluminum and composite AirFrame.
  • Proprietary Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
  • Recommended amplifier power: 20-300 watts per channel, Crossover frequency: 500 Hz.
  • Convenient push-style speaker terminals for bare wires, pins, or bananas, Sturdy, 1/4-20 ETC spikes.
  • Frequency response: 42 - 22,000 Hz ±3 dB, Dispersion: 30-degrees x 34" line source, Sensitivity: 91 dB/2.83 volts/meter.
  • Nominal Impedance: 6 Ohms, 1.6 @ 20 kHz, compatible with 4, 6, or 8 ohm rated amplifiers.
  • Weight: 35.5 lbs. each, Dimensions: 52.1" high, 9" wide, 16.3" deep.
Check Stock

Corsair Power Supplies , RMX White 850W CP-9020156-NA

  • 80 plus Gold certified high efficiency operation for lower power consumption less noise and cooler temperatures.
  • A 140mm rifle bearing fan with a specially calculated fan curve ensures that fan noise is kept to a minimum, even at full load..
  • 105°C-rated capacitors industrial-grade capacitors deliver solid electrical performance and reliability.
  • Supports Modern Standby sleep mode for extremely fast wake-from-sleep times and better low-load efficiency..
  • Zero RPM fan mode at low and medium loads The cooling fan switches off entirely for near-silent operation.
Check Stock

Mixer Module, Bandwidth Mixing 0.1‑500MHz High Frequency Transducer -10dBm for Quadrature Modulation for Base Station for HF VHF Receiver

  • Single Power Supply: The mixer module is designed to be powered by a single power supply, and the RF, IF and LO ports have DC isolation capacitors for easy use.
  • 10.3dB SSB Noise Figure at 70MHz: With the output amplifier and optimal source impedance of this mixer module, the SSB noise figure is 10.3dB at 70MHz. There is no insertion loss, no external duplexer, and no passive termination.
  • Low Distortion and Wide Dynamic Range: AD831 is a low distortion, wide dynamic range, single chip mixer, very practical.
  • -10dBm LO Power Consumption: Provides +24dBm third order intercept point, can achieve -10dBm LO power consumption, without high power LO drivers, there are no corresponding shielding and isolation problems, can improve system performance and reduce costs.
  • Wide Application: Suitable for applications such as RF‑IF down conversion in HF and VHF receivers, second mixer in base stations, DC baseband conversion, quadrature modulation and demodulation, and Doppler shift detection in imaging.
Check Stock

Make 1 Million Dollars

  • SUPERIOR SOUND. High-current EI transformer makes sure that sound quality doesn't suffer. Large custom audio capacitors and a discrete output stage..
  • AMP TECHNOLOGY. Wide Range Amplification Technology delivers high-current power stability via large custom capacitors, while low-NFB amps capture depth and spatiality for a wide frequency spectrum with low distortion..
  • AUTHENTIC AUDIO. Direct Mode bypasses tone and PM Bass circuitries. In combination with a refined amp circuit design, signal-pathlengths have been significantly reduced in comparison to the A-9010 for even more accurate and faithful sound..
  • BASS BOOST. Phase Matching Bass Boost eliminates phase-shift between low- and mid-range frequency bands. Bass response is enhanced without compromising vocal clarity, which is especially useful when playing music at low volumes..
  • FEATURES. 50 W + 50 W (4 ohms, 20 hz–20 kHz, 0.9% THD, 2-ch Driven, FTC). Remote controller..
Check Stock

Elite Vision - LED Anti-Flicker Canbus Capacitor Decoder - Error Free Code Cancellation Resistor - For LED and HID Conversion Kits H4 9003

  • Capacitors are required for LED and HID kits in 2008+ American/German vehicles..
  • Capacitors correct the power from and to the vehicle to eliminate LED error codes/strobing/flickering. Very durable wire will last with any possible....
  • Plug and Play System. Our capacitors are made to plug directly inline into your vehicles harness and into our LED kits. Check your owner’s manual,....
  • Capacitors do not get hot. They will even fit inside headlight housings with caps as they will not melt the plastics!.
  • Our products include a 1-year warranty, and lifetime technical support through Elite Vision Advanced Automotive Accessories!.
Check Stock

Battery Tester EBC-A40L 5V40A Battery Tester Lithium Polymer Power Battery Capacity Tester 110V

  • 【Professional Performance】This battery tester is designed for testing capacitors, suitable for battery capacity and performance testing within 5V, its maximum discharge power is 200W, stable operation, large accuracy of measured voltage and current, small error. Equipped with high-current high-precision current clamp, on-site measurement of capacitors without removing the connecting wires simplifies the testing process, effectively improves efficiency and avoids damage to electrical equipment..
  • 【Volume Measurement】Within 10Ah, the resolution is 0.001 Ah.
  • 【Excellent Quality】This battery capacity tester is made of high quality metal, which is sturdy and durable, and the surface is polished and painted with great care, so that it is not easy to oxidize and rust. The internal design has a fan cooling system to ensure effective heat dissipation, guaranteeing product performance and safety in use..
  • 【Wide Range of Applications】This lithium polymer power battery capacity tester has superior performance and is very suitable for mechanical industry, automotive industry, construction industry, electronic industry and power plants. It is small in size, light in weight, and easy to carry a....
Check Stock

MartinLogan ElectroMotion ESL X Floor-Standing Speaker Each (Satin Black)

  • High-frequency transducer: XStat CLS electrostaic transducer.
  • Panel dimensions: 40" x 8.6" (102cm x 22cm), Radiating area: 344 in2.
  • Low-frequency driver: Two 8” (20.3 cm) high excursion, high-rigidity paper cones with extended throw driver assembly, non-resonance asymmetrical chamber format, bass reflex.
  • Vojtko topology filter utilizing custom air core coil and low DCR steel laminate inductors, polyester film capacitors in series, and low DF electrolytic capacitors in parallel.
  • Frequency response: 41–22,000 Hz ±3dB, Sensitivity: 91 dB/2.83 volts/meter.
  • Recommended amplifier power: 20-400 watts per channel.
  • Dimensions: 59.2 x 9.4 x 20.7 (150.3cm x 23.8cm x 52.6cm), Weight: 52lbs. (23.6kg) each.
Check Stock

LITTELFUSE V130LA10AP METAL OXIDE VARISTOR, 175V 340V RAD (10 pieces)

  • 【Material】 -The resistor is made of ZnO film, with a special epoxy resin coated disc structure with radial leads, and has a long service life.
  • 【Features】-The capacitor has the characteristics of low loss, high working voltage and stability, stable capacity and high temperature resistance.
  • 【Advantage】-Monolithic capacitors are compact in structure and can provide high-capacity capacitors with excellent moisture resistance and reliable performance.
  • 【Application】 -Voltage-dependent resistors are widely used in the resonance, coupling, filtering, and bypass of electronic precision instruments and various small electronic devices.
Check Stock

Elite Vision – LED Anti-Flicker Canbus Capacitor Decoder – Error Free Code Cancellation Resistor – For LED and HID Conversion Kits (9007)

  • Capacitors are required for LED and HID kits in 2008+ American/German vehicles..
  • Capacitors correct the power from and to the vehicle to eliminate LED error codes/strobing/flickering. Very durable wire will last with any possible wire tugging!.
  • Plug and Play System. Our capacitors are made to plug directly inline into your vehicles harness and into our LED kits. Check your owner’s manual, or the LED kit you have to confirm the capacitor size that you need for your desired replacement..
  • Capacitors do not get hot. They will even fit inside headlight housings with caps as they will not melt the plastics!.
  • Our products include a 1-year warranty, and lifetime technical support through Elite Vision Advanced Automotive Accessories!.
Check Stock

Thermaltake Toughpower GX2 80+ Gold 600W SLI/Crossfire Ready Continuous Power ATX 12V V2.4/EPS V2.92 Non Modular Power Supply 5 Year Warranty PS-TPD-0600NNFAGU-2

  • CERTIFIED GOLD - Supporting 80 Plus Gold efficiency up to 90% and optimized for C6 or C7 States ready.
  • NON MODULAR CONNECTORS – Main Power (24 pin) x 1/ ATX 12V (4plus4 pin) x 1/ SATA (5 pin) x 6/ PCI-E (6plus2 pin) x 2/ peripheral (4 pin) x 3/ FDD x 1.
  • ULTRA QUIET 120MM FAN – Dynamic Bearing fan s superior cooing performance and silent operation.
  • HIGH QUALITY CAPACITORS - High quality capacitors provide superb performance and reliability.
  • LOW RIPPLE NOISE – Ensure excellent power supply stability Keep performance-critical components such as VGA card to operate reliably for longer.
Check Stock

Thermaltake Smart Pro RGB 750W 80+ Bronze Smart Zero 256-Color RGB Fan Fully Modular ATX 12V 2.4/EPS 12V 2.92 Power Supply 7 YR Warranty PS-SPR-0750FPCBUS-R

  • New era in Colorful power: take on more than just power, with RGB LED lighting options at your fingertips.
  • 80 plus Bronze Certified and sky lake C6/C7 ready: Thermaltake smart Pro RGB Series is already prepared for Intel processors to achieve maximum energy....
  • Zero rpm 140mm smart ring fan: reduce total system noise with 0 rpm fan speeds options and improve case exhaust cooling with "face up" case placement....
  • High quality Japanese capacitors: high quality Japanese capacitors provide superb performance and reliability.
  • 7 year Warranty. Input Frequency Range: 50Hz - 60Hz.
Check Stock